Subject: 3.5m Night Log 20220522
From: dembicky@apo.nmsu.edu
Date: Mon, 23 May 2022 10:29:43 +0000 (UTC)
                      Apache Point Observatory
                      3.5m Telescope Night Log
                      Sunday, May 22, 2022
PROG  PI ASTRONOMER      OBSERVER(S)
--------------------------------------------------------------------
UW08  C.Phillips        C.Phillips
NM05  A.Dijeau          A.Dijeau
                         ON-SKY
PROG  INSTRUMENT     START   FINISH
--------------------------------------------------------------------
UW08  KOSMOS         --:--   --:--
NM05  KOSMOS         --:--   --:--
   PROG       SCHEDULED      WEATH     EQUIP     OBS     NOT USED
 I/ROW/DTN  START  FINISH   D    B    D    B    D    B    D    B
-----------------------------------------------------------------
UW08/R      20:09  01:10   3.0   0   2.0   0   0.0  0.0   0    0
NM05/R      01:10  05:51   0.0  0.0  1.2  3.5  0.0  0.0   0    0
note: scheduled times listed include instrument change time
              ------------- ACTIVITY LOG --------------
Observing Specialist: J.Dembicky
We had another NotHomed Sec State when I logged into TUI this afternoon to do checkout.  I noticed this just before I was about to do my test slews.  Russet logged in and fixed this by homing the secondary.
The Galil then rebooted itself again about 40 mins after Russet fixed it.
022-05-23 02:28:21 .tcc.0 0 tcc W SecState=NotHomed,0,5,0.0,0.0
I finished the homing procedure at 03:26
I also saw this error come thru while fixing the secondary home problem, I don't think it is related but noted it anyhow.
2022-05-23 03:13:04 .hub 0 hub w ParseError="Command from unnamed could not be parsed: '\\x03\\x00\\x00/*\\xe0\\x00\\x00\\x00\\x00\\x00Cookie: mstshash=Administr'"
Galil rebooted itself again at
2022-05-23 03:41:24 .tcc.0 0 tcc W SecState=NotHomed,0,5,0.0,0.0
I then talked to Bill and all he could suggest is re-homing.  If it becomes too frequent then shut down for the night until they can investigate the issue in the morning.
This re-homing failed, Galil rebooted?, while I was rehoming the secondary.  I got the NotHomed message again.  This appeared in the status window as I was doing the final move for A,B,C to 0.
I finished the 2nd re-home, which worked, at 04:39.
The Galil rebooted at 04:52 (Sec State NotHomed state again)
This time while I was homing A,B & C the Galil to rebooted on me (Step 6 in Russet's instructions).  That time it was about 10 mins after the last reboot.
I tried re-homing again and the galil again rebooted, about 10 mins in, during the process.
I tried re-homing again and almost finished the process (less than 10 mins) but the Galil rebooted again before I could finish!
Per Bill, if the problem becomes too frequent we should call it for the night.  I would say reboots now on the order of  1u per 0.1 cubic feet.
              ----------  TELESCOPE SOFTWARE  ----------
Current TCC version: 1.4.2
Current HUB version: v20171231_01
Current TUI version: 2.6.0