Subject: 2.5m obslog 20230607 (SJD 60103) From: asimmons@apo.nmsu.edu Date: Thu, 8 Jun 2023 10:45:56 +0000 (UTC) APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Wednesday June 07, 2023 (SJD 60103) ---- Observing Team ---- Audrey Oravetz Dan Oravetz (support) John Downey (support) ---- Observing Plan ---- Wed 07 Jun 2023 60103 0.78 03:12 03:31 10:33 13:32 20:36 --- dark until 06:05 ( 2.6 h), then bright ( 5.8 h, w/ 1.0 h for 8 deg design) BOSS dithers at 90 and 270 position angle ---- Observing Summary ---- Unfortunately we ran into some issues focusing M2 tonight. All but 0.2hrs were lost. One exposure was taken with: Time field-dsgn-conf Design type BOSS/APOGEE exp complete? Comment =========================================================================== 02:30:45 102551-122639-10206 bright_time 1X900+1XAB not done *not focused; low signal STUI error messages consistently read: 03:03:27 .tcc 0 tcc W Text="Device Command A=4910872; B=4884887; C=4975744; D=-12; E=-3412; XQ #MOVE Failing: ?Command error 22 Begin not possible due to limit switch" 03:03:27 .tcc 0 tcc w Text="Collimation Failure: ?Command error 22 Begin not possible due to limit switch" As part of troubleshooting, small galil movements were successfully commanded in the telnet session, so the next step was to try homing. D and E homed normally but A, B, and C actuators failed at homing due to: 0 2 i UnparsedReply="Reverse limit switch not depressed for axes 0, 1, 0, 0, 0 " There could be a problem with a limit switch or the actual motor. Move investigation is needed tomorrow. ---- Observing Log ---- Afternoon: ========== Checked actors, mirror numbers, and took APOGEE, BOSS, and FPS cals. 00:38:53 boss exposure 0.0, file=357205 00:39:02 apogee.expose=apRaw-45410001, 60, A, Dark 00:40:13 boss exposure 20.0, file=357206 00:42:07 boss exposure 4.0, file=357207 00:42:48 boss exposure 4.0, file=357208 00:43:31 sp1.motor.move= -1439, -1439, -1438 00:43:31 Hartmann collimate output sp1: offset: r= -1979 (Out of focus); b= 2.8 (In Focus) sp1: pred. move: spAverageMove= -1439 sp1: pred. resid: r= -540, b= -1.7, txt= OK, spTemp = 8.2 00:45:13 boss exposure 4.0, file=357209 00:46:40 boss exposure 25.0, file=357210 mjd i UT File/Exp Imtype Nread A/B Dth Design-Cfg Arch Offset %Flux/FPI Comm ------------------------------------------------------------------------------ 60103 1 00:49 45410001 Dark 60 A 13.0 ---------- a-b-c - - 60103 2 00:51 45410002 QuarFlat 10 A 13.0 ---------- a-b-c - - 60103 3 00:53 45410003 Arc-Thar 12 B 13.5 ---------- a-b-c 1.02 - 60103 4 01:00 45410004 Arc-Une 40 B 13.5 ---------- a-b-c - - 60103 5 01:02 45410005 Arc-Thar 12 A 13.0 ---------- a-b-c 0.49 - 60103 6 01:10 45410006 Arc-Une 40 A 13.0 ---------- a-b-c - - 60103 7 01:21 45410007 Dark 60 A 13.0 ---------- a-b-c - - 60103 8 01:26 45410008 Arc---- 30 A 13.0 ---------- a-b-c - 89 FPI ------------------------------------------------------------------------------ 00:42:34 Config Loaded: -999-10205 00:49:24 FVC LOOP AND BOSS CALS fvc_rms= 36.96 fvc_deltarms= 38.29 fvc_filename=/data/fcam/60103/fimg-fvc1n-0001.fits fvc_perc_90= 49.90 fvc_percent_reached= 2.80 fimg-fvc1n-0002.fits - fliswarm talk -n fvc expose 50 fliswarm talk -c gfa expose --bias --count 10 fliswarm talk -c gfa expose --dark --count 5 5 01:45Z - Started ventilating. Checkout went ok. Night: ====== Opened the telescope to partly cloudy skies. 02:25:10 apogee.expose=apRaw-45410009, 5, A, DomeFlat 02:26:24 apogee.expose=apRaw-45410010, 5, A, DomeFlat 02:27:39 apogee.expose=apRaw-45410011, 5, A, DomeFlat --> Accidentally tunred on the HgCD and Ne lights during this exposure. Taking another one just in case this one was bad. 02:29:36 apogee.expose=apRaw-45410012, 5, A, DomeFlat MJD DomeFlat MTPs:1 2 3 4 5 6 7 8 9 10 AZ ALT ROT 60103 45410009 1.00 1.01 1.03 1.02 1.03 0.98 0.97 1.00 1.00 0.95 60.0 60.0 60.0 60103 45410010 1.01 1.01 1.03 1.01 1.03 0.98 0.97 0.99 1.00 0.95 60.0 60.0 60.0 60103 45410011 1.02 1.01 1.03 1.01 1.03 0.98 0.97 1.00 1.00 0.95 60.0 60.0 60.0 60103 45410012 1.02 1.01 1.03 1.01 1.03 0.98 0.96 0.99 1.00 0.94 60.0 60.0 60.0 (observers39) [observer@sdss5-hub: ~]$ aptest 60103 45410009 Missing Fibers: [21] Faint Fibers: [225, 289] ******************************************************** 02:30:45 Field-Design-Configuration: 102551-122639-10206 ******************************************************** 02:31:39 boss exposure 4.0, file=357211 02:32:19 boss exposure 4.0, file=357212 02:33:06 sp1.motor.move= 1326, 1325, 1326 02:33:06 Hartmann collimate output sp1: offset: r= 659 (In Focus); b= -6.2 (Out of focus) sp1: pred. move: spAverageMove= 1325 sp1: pred. resid: r= -666, b= -2.1, txt= OK, spTemp = 7.9 02:33:58 boss exposure 25.0, file=357213 02:35:46 boss exposure 25.0, file=357214 02:37:35 boss exposure 25.0, file=357215 02:40:13 GOTO-FIELD 02:43:15 FVC LOOP AND BOSS CALS fvc_rms= 7.43 fvc_deltarms= 40.01 fvc_filename=/data/fcam/60103/fimg-fvc1n-0004.fits fvc_perc_90= 9.60 fvc_percent_reached= 57.50 02:43:40 boss exposure 25.0, file=357216 02:45:35 boss exposure 4.0, file=357217 02:46:15 boss exposure 4.0, file=357218 02:46:57 sp1.motor.move= 369, 370, 370 02:46:57 Hartmann collimate output sp1: offset: r= 1319 (Out of focus); b= 1.8 (In Focus) sp1: pred. move: spAverageMove= 370 sp1: pred. resid: r= 948, b= 3.0, txt= OK, spTemp = 7.8 02:47:15 boss exposure 4.0, file=357219 02:50:00 START SCIENCE EXPOSURES 02:50:24 apogee.expose=apRaw-45410013, 43, A, Object 02:50:31 boss exposure 900.0, file=357220 02:58:05 apogee.expose=apRaw-45410014, 43, B, Object Throughout this exposure, I was unable to adjust the secondary mirror. Error messages: 02:53:18 .tcc 0 tcc W Text="Device Command A=5248987; B=5222997; C=5313855; D=669; E=-2731; XQ #MOVE Failing: ?Command error 22 Begin not possible due to limit switch" 02:53:18 cherno.cherno 10260 tcc f text="Sub-command(s) failed: move 4125.3828,0.0000,0.0000,0.0000,25.6813: ?Command error 22 Begin not possible due to limit switch" 02:53:18 CmdDone: cherno.cherno 10260 tcc set focus=27.0 /incremental 02:53:18 hal.hal 48031 cherno e error="Failed applying focus correction." I issued tcc sec talk stop, which temporarily stopped the motion, but quickly returned to 'Sec state Iter 1 of 3'. The telescope was moved to 121,70,0 in preparation of homing M2. Axes halted. Collimation disabled. Telnet into sdss5-tcc 2532; The controller is responsive, and MIGS can be moved. Successfully homed D and E Galils with 0 positional error. During homing A, B, and C, the Galils were moving to the commanded home position of -7.5M when suddenly it stopped, and threw this error message: 0 2 > Text = "Homing Actuators: A, B, C" 0 2 i homing=1,1,1,0,0 0 0 i Text = zeroing previous mount offset 2 2 w Text="Galil is busy executing: A=1; B=1; C=1; D=MAXINT; E=MAXINT; XQ #HOME, showing cached status" 2 2 i orient=3791.64,3.02,-0.27,-41.73,-1.96,9.39; desOrient=NaN,NaN,NaN,NaN,NaN,NaN; desOrientAge=250.61; actMount=4778303.10,4780987.84,4771333.81,-0.00,0.00; cmdMount=4910872.28,4884887.44,4975743.82,-11.57,-3411.58; desEncMount=4859208.22,4859223.89,4859218.77,-23.58,-3423.58; modelMount=4859208.08,4859223.69,4859220.99,-23.58,-3423.58; maxIter=3; homing=1,1,1,0,0; axisHomed=1,1,1,1,1 0 2 w state=Homing, 0, 3, 0.00, 0.00 0 2 w state=Homing, 0, 3, 363.30, 363.30 0 2 i UnparsedReply="Reverse limit switch not depressed for axes 0, 1, 0, 0, 0 - trying again" 0 2 w state=Homing, 0, 3, 363.30, 363.30 0 0 w Text="Device Command A=1; B=1; C=1; D=MAXINT; E=MAXINT; XQ #HOME Failing: ?Command error 22 Begin not possible due to limit switch" 0 2 f text="?Command error 22 Begin not possible due to limit switch" 0 0 w state=Homing, 0, 3, 363.22, 363.30 0 0 i axisHomed=1,1,1,1,1 0 0 i encMount=-7628954.00,-7649584.00,-7588060.00,0.00,0.00 0 0 i orient=-6050.14,-18.90,-2.64,-34.49,12.45,-10.40; actMount=-7623073.23,-7653067.07,-7590459.86,-0.00,0.00; cmdMount=4910872.28,4884887.44,4975743.82,-11.57,-3411.58 0 0 i status=67076,65540,69124,4,4 0 0 i piezoStatus=5 0 0 i piezoCorr=-52.00,-23.00,61.00; piezoStatusWord=-000000052, -000000023, 000000061 0 0 i maxIter=3; desOrient=NaN,NaN,NaN,NaN,NaN,NaN; desOrientAge=528.51; desEncMount=4859208.22,4859223.89,4859218.77,-23.58,-3423.58; homing=0,0,0,0,0 0 0 i state=Done, 0, 3, 0.00, 0.00 Now, no Galils are responsive to any small adjustments. galil B=-2000; XQ#MOVE 0 0 i galilReply="B=-2000; XQ#MOVE" 0 0 i galilReply="" 0 0 i galilReply="?HMERR some axes to be moved have not been homed 0, 1, 0, 0, 0" 0 0 w Text="Device Command B=-2000; XQ#MOVE Failing: ?HMERR some axes to be moved have not been homed 0, 1, 0, 0, 0" galil C=-2000; XQ#MOVE 0 0 i galilReply="C=-2000; XQ#MOVE" 0 0 i galilReply="" 0 0 i galilReply="?HMERR some axes to be moved have not been homed 0, 0, 1, 0, 0" 0 0 w Text="Device Command C=-2000; XQ#MOVE Failing: ?HMERR some axes to be moved have not been homed 0, 0, 1, 0, 0" 0 0 i galilReply="" 0 0 i galilReply="OK" 0 0 i axisHomed=0,0,0,1,1 0 0 i encMount=NaN,NaN,NaN,0.00,0.00 0 0 i orient=NaN,NaN,NaN,NaN,NaN,NaN; actMount=NaN,NaN,NaN,NaN,NaN; cmdMount=4910872.28,4884887.44,4975743.82,-11.57,-3411.58 0 0 i status=67076,65540,69124,4,4 0 0 i piezoStatus=5 0 0 i piezoCorr=-52.00,-23.00,61.00; piezoStatusWord=-000000052, -000000023, 000000061 0 0 i maxIter=3; desOrient=NaN,NaN,NaN,NaN,NaN,NaN; desOrientAge=1188.77; desEncMount=4859208.22,4859223.89,4859218.77,-23.58,-3423.58; homing=0,0,0,0,0 0 0 w state=NotHomed, 0, 3, 0.00, 0.00 0 0 i axisHomed=0,0,0,1,1 Called JohnD. He is on his way to the site. He noticed that the M2 Piezo numbers are red for A and C. Moved the telescope to 5. Reset the piezo's with no change to the M2 status. Still reads 'not homed' and A and C piezos are still red. XQ#STATUS 0 2 f UnknownCommand=xq#status galil XQ#STATUS 0 0 i galilReply="XQ#STATUS" 0 0 i galilReply="" 0 0 i galilReply="0, 0, 0, 1, 1 axis homed" 0 2 i axisHomed=0,0,0,1,1 0 0 i galilReply="" 0 0 i galilReply="999999999, 999999999, 999999999, 000000000, 000000000 commanded position" 0 0 i galilReply="" 0 0 i galilReply="999999999, 999999999, 999999999, 000000000, 000000000 actual position" 0 2 i encMount=NaN,NaN,NaN,0.00,0.00 0 2 i orient=NaN,NaN,NaN,NaN,NaN,NaN; actMount=NaN,NaN,NaN,NaN,NaN; cmdMount=5401063.97,5401083.26,5401079.92,-7.96,-3407.96 0 0 i galilReply="" 0 0 i galilReply="00067076, 00065540, 00069124, 00000004, 00000004 status word" 0 2 i status=67076,65540,69124,4,4 0 0 i galilReply="" 0 0 i galilReply="5 piezo status word" 0 2 i piezoStatus=5 0 0 i galilReply="" 0 0 i galilReply="-000000052, -000000023, 000000061 piezo corrections (microsteps)" 0 2 i piezoCorr=-52.00,-23.00,61.00; piezoStatusWord=-000000052, -000000023, 000000061 0 0 i galilReply="" 0 0 i galilReply="OK" Unfortunately not much more can be done tonight in terms of troubleshooting. I closed, turned off the FPS, and started APOGEE morning cals. ---- Mirror Numbers ---- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A: 0.0030 0.0040 Axial B: -0.0230 -0.0020 Axial C: -0.0260 -0.0260 Trans D: 0.0930 0.0960 Lateral E: 0.3315 0.3315 Lateral F: 0.5345 0.5340 GALILS Commanded: 12500 -1600 5300 47050 -8800 -8400 Actual: 12500 -1600 5300 47050 -8800 -8400 SETMIR VALUES PrimDesOrient: 0.0 -59.5 -9.15 -512.0 1906.3 PrimOrient: 1.07 -59.51 -9.21 -512.13 1906.31 SECONDARY: ---------- Focus: 0.0000 Air temp: 0.00 Altitude: 30.0 MIGS TONIGHT NOMINAL Axial A: -0.0490 -0.0510 Axial B: 0.0190 0.0160 Axial C: -0.0490 -0.0610 Trans D: -0.0320 -0.0360 GALILS Commanded: 4910850 4884900 4975750 0 -3400 Actual: 4861706 4862518 4860490 0 -3400 SETMIR VALUES SecDesOrient: 3857.0 0.0 0.0 0.0 42.22 SecOrient: 3858.87 0.6 0.12 0.08 41.25 ---- Telescope Offsets and Scale ---- Time Field-Design Az Alt Rot RA Off Dec Off Rot Off Guide RMS (um) ================================================================================ 03:05:31 nan-nan 61.6 36.9 250.1 -0.005 0.001 0.338 0.358 ---- Focus Log ---- Time Field-Design M1 M2 Focus Az Alt Temp Wind Dir ================================================================================ 03:05:31 nan-nan 1.07 3767.01 400 61.6 36.9 0.0 13 286 ---- Telescope Status ---- 01:45Z Started ventilation 02:05Z encl25m : open 06:05Z encl25m : closed No interlocks bypassed Status at: Telescope stowed at: 121.0, 30.0, 0.0 mount Instrument mounted: FPS Counterweights at: 680/710 LN2 autofill systems: Connected and turned on 180L LN2 dewar scales: SP1 202 lbs, 19 psi ---- Software Used ---- Get Versions, 06/08/23, 02:05:11 -- STUI software: STUI : 1.7.18b1 alerts : 2.3.0 boss : 6.0.2-alpha.0 -boss.specMec : 3.0.4 apo : 3.0.1 fliswarm : 0.4.0 jaeger : 1.4.1a0 kaiju : 1.3.1 coordio : 1.7.1 fps_calibrati : 2023.01.21+e70e5c1 cherno : 0.6.3a0 astrometrynet : 0.93 hal : 0.6.0b5 hartmann : 2.0.2 hub : 5.0.1a0 mcp : 2.1 -mcp.plc : 35 -mcp.azFiduci : v1_147 -mcp.altFiduc : v1_147 -mcp.rotFiduc : v1_147 tcc : 1.4.0 apogee : not availble apogeecal : not availble apogeeql : v1_7_0dev STUIAdditions : FAILED Boson : 0.3.2 -- done -- --------------Other Versions-------------- sdss-obstools : 3.9.3 TPM : 1.2-31-gd7eb MCP : 2.1-1-ge461 PLC : V35 Fiducials : v1_147 idlspec2d : v6_1_0 Kronos : 1.6.2a roboscheduler : 1.3.2 /dev/sdb1 2.0T 283G 1.8T 14% /home /dev/sdd1 22T 14T 7.5T 65% /data ---- APOGEE Data Summary ---- (observers39) [observer@sdss5-hub: ~]$ list_ap -m 60102 APOGEE data list, mjd=60102, all raw_data: /data/apogee/utr_cdr/60102/apRaw-*.fits archive: /data/apogee/archive/60102/apR-[a,b,c]-*.apz quickred: /data/apogee/quickred/60102/apq-*.fits ------------------------------------------------------------------------------ mjd i UT File/Exp Imtype Nread A/B Dth Design-Cfg Arch Offset %Flux/FPI Comm ------------------------------------------------------------------------------ 60102 10 10:22 45400010 Dark 60 A 13.0 ---------- a-b-c - - 60102 11 10:32 45400011 Dark 60 A 13.0 ---------- a-b-c - - 60102 12 10:43 45400012 Dark 60 A 13.0 ---------- a-b-c - - 60102 13 10:45 45400013 QuarFlat 10 A 13.0 ---------- a-b-c - - 60102 14 10:47 45400014 QuarFlat 10 A 13.0 ---------- a-b-c - - 60102 15 10:48 45400015 QuarFlat 10 A 13.0 ---------- a-b-c - - 60102 16 10:51 45400016 Arc-Thar 12 B 13.5 ---------- a-b-c 1.04 - 60102 17 10:58 45400017 Arc-Une 40 B 13.5 ---------- a-b-c - - 60102 18 11:00 45400018 Arc-Thar 12 A 13.0 ---------- a-b-c 0.49 - 60102 19 11:07 45400019 Arc-Une 40 A 13.0 ---------- a-b-c - - 60102 20 11:13 45400020 Dark 30 A 13.0 ---------- a-b-c - - 60102 21 11:18 45400021 InteFlat 30 A 13.0 ---------- a-b-c - - 60102 22 11:24 45400022 InteFlat 30 A 13.0 ---------- a-b-c - - 60102 23 11:29 45400023 InteFlat 30 A 13.0 ---------- a-b-c - - 60102 24 11:34 45400024 Dark 30 A 13.0 ---------- a-b-c - - 60102 25 11:40 45400025 Arc---- 30 A 13.0 ---------- a-b-c - 92 FPI ------------------------------------------------------------------------------ APOGEE data list, mjd=60103, all raw_data: /data/apogee/utr_cdr/60103/apRaw-*.fits archive: /data/apogee/archive/60103/apR-[a,b,c]-*.apz quickred: /data/apogee/quickred/60103/apq-*.fits ------------------------------------------------------------------------------ mjd i UT File/Exp Imtype Nread A/B Dth Design-Cfg Arch Offset %Flux/FPI Comm ------------------------------------------------------------------------------ 60103 1 00:49 45410001 Dark 60 A 13.0 ---------- a-b-c - - 60103 2 00:51 45410002 QuarFlat 10 A 13.0 ---------- a-b-c - - 60103 3 00:53 45410003 Arc-Thar 12 B 13.5 ---------- a-b-c 1.02 - 60103 4 01:00 45410004 Arc-Une 40 B 13.5 ---------- a-b-c - - 60103 5 01:02 45410005 Arc-Thar 12 A 13.0 ---------- a-b-c 0.49 - 60103 6 01:10 45410006 Arc-Une 40 A 13.0 ---------- a-b-c - - 60103 7 01:21 45410007 Dark 60 A 13.0 ---------- a-b-c - - 60103 8 01:26 45410008 Arc---- 30 A 13.0 ---------- a-b-c - 89 FPI 60103 9 02:25 45410009 DomeFlat 5 A 13.0 -999-10205 a-b-c - 140 60103 10 02:26 45410010 DomeFlat 5 A 13.0 -999-10205 a-b-c - 140 60103 11 02:28 45410011 DomeFlat 5 A 13.0 -999-10205 a-b-c - 144 60103 12 02:30 45410012 DomeFlat 5 A 13.0 -999-10205 a-b-c - 140 60103 13 02:57 45410013 Object 43 A 13.0 122639-10206 a-b-c 0.41 1,1 60103 14 03:05 45410014 Object 43 B 13.5 122639-10206 a-b-c 0.90 1,1 60103 15 04:23 45410015 DomeFlat 5 B 13.5 122639-10206 a-b-c - 138 60103 16 04:24 45410016 DomeFlat 5 B 13.5 122639-10206 a-b-c - 138 60103 17 04:25 45410017 DomeFlat 5 B 13.5 122639-10206 a-b-c - 140 cannot read file : /data/apogee/utr_cdr/60103/apRaw-45410018.fits cannot read file : /data/apogee/utr_cdr/60103/apRaw-45410019.fits ------------------------------------------------------------------------------ (observers39) [observer@sdss5-hub: ~]$ check_ap 60103 Using nfowler=1 for DOMEFLAT Using nfowler=1 for DOMEFLAT Using nfowler=1 for DOMEFLAT Using nfowler=1 for DOMEFLAT Using nfowler=1 for DOMEFLAT Using nfowler=1 for DOMEFLAT Using nfowler=1 for DOMEFLAT num field design config exptype dithpix nread relflux okay dx dy sigx sigy fpi1 fpi2 -------- ------ ------ ------ ------------ ------- ----- ------- ---- ------- ------- ------ ------ ---- ---- 45410001 -999 -999 10204 DARK 13.0 60 -5 True -- -- -- -- -- -- 45410002 -999 -999 10205 QUARTZFLAT 13.0 10 101 True -- -0.33 -- 0.86 -- -- 45410003 -999 -999 10205 ARCLAMP-THAR 13.5 12 99 True 0.97 0.48 1.07 0.88 -- -- 45410004 -999 -999 10205 ARCLAMP-UNE 13.5 40 96 True 0.73 0.31 1.09 0.89 -- -- 45410005 -999 -999 10205 ARCLAMP-THAR 13.0 12 93 True 0.44 0.43 1.07 0.87 -- -- 45410006 -999 -999 10205 ARCLAMP-UNE 13.0 40 94 True 0.21 0.29 1.10 0.90 -- -- 45410007 -999 -999 10205 DARK 13.0 60 5 True -- -- -- -- -- -- 45410008 -999 -999 10205 FPI 13.0 30 161 True 12.07 0.24 1.14 0.87 -- -- 45410009 -999 -999 10205 DOMEFLAT 13.0 5 107 True -- -0.34 -- 0.85 -- -- 45410010 -999 -999 10205 DOMEFLAT 13.0 5 106 True -- -0.30 -- 0.84 -- -- 45410011 -999 -999 10205 DOMEFLAT 13.0 5 109 True -- -0.33 -- 0.85 -- -- 45410012 -999 -999 10205 DOMEFLAT 13.0 5 107 True -- -0.31 -- 0.85 -- -- 45410013 102551 122639 10206 OBJECT 13.0 43 156 True 0.59 -0.34 1.77 0.91 142 131 45410014 102551 122639 10206 OBJECT 13.5 43 154 True 1.07 -0.31 1.79 0.89 143 132 45410015 102551 122639 10206 DOMEFLAT 13.5 5 105 True -- -0.31 -- 0.84 -- -- 45410016 102551 122639 10206 DOMEFLAT 13.5 5 107 True -- -0.31 -- 0.85 -- -- 45410017 102551 122639 10206 DOMEFLAT 13.5 5 107 True -- -0.29 -- 0.84 -- -- 45410018 102551 122639 10206 DARK 13.5 60 -13 True -- -- -- -- -- -- num exptype nread mtp1 mtp2 mtp3 mtp4 mtp5 mtp6 mtp7 mtp8 mtp9 mtp10 -------- ---------- ----- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----- 45410002 QUARTZFLAT 10 71 77 85 94 95 89 90 93 93 85 45410009 DOMEFLAT 5 79 87 98 106 113 99 104 111 107 99 45410010 DOMEFLAT 5 80 89 99 105 113 99 104 110 106 100 45410011 DOMEFLAT 5 82 91 100 107 114 100 105 111 107 101 45410012 DOMEFLAT 5 81 90 99 105 113 98 104 110 106 100 45410015 DOMEFLAT 5 77 84 97 103 112 98 103 109 104 98 45410016 DOMEFLAT 5 78 88 98 103 112 98 103 109 105 99 45410017 DOMEFLAT 5 81 89 99 105 113 99 105 110 106 101 ---- BOSS Data Summary ---- Reading FITS from /data/spectro//60103 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - n Time Filename design-field cfg flav shu Exp colA colB colC Hrt - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 00:38 b1-00357205 ----------- ---- bia Clo 0.0 8460 8425 8435 2 00:38 r1-00357205 ----------- ---- bia Clo 0.0 8460 8425 8435 3 00:40 r1-00357206 ----------- ---- dar Clo 20.0 8460 8425 8435 4 00:40 b1-00357206 ----------- ---- dar Clo 20.0 8460 8425 8435 5 00:42 b1-00357207 -999--999 10204 arc Lef 4.1 8460 8425 8435 HART 6 00:42 r1-00357207 -999--999 10204 arc Lef 4.1 8460 8425 8435 HART 7 00:42 r1-00357208 -999--999 10205 arc Rig 4.1 8460 8425 8435 HART 8 00:42 b1-00357208 -999--999 10205 arc Rig 4.1 8460 8425 8435 HART 9 00:45 r1-00357209 -999--999 10205 arc Out 4.1 7021 6986 6997 10 00:45 b1-00357209 -999--999 10205 arc Out 4.1 7021 6986 6997 11 00:46 r1-00357210 -999--999 10205 fla Out 25.1 7021 6986 6997 12 00:46 b1-00357210 -999--999 10205 fla Out 25.1 7021 6986 6997 13 02:31 r1-00357211 122639-102551 10206 arc Lef 4.0 7021 6986 6997 HART 14 02:31 b1-00357211 122639-102551 10206 arc Lef 4.0 7021 6986 6997 HART 15 02:32 r1-00357212 122639-102551 10206 arc Rig 4.1 7021 6986 6997 HART 16 02:32 b1-00357212 122639-102551 10206 arc Rig 4.1 7021 6986 6997 HART 17 02:33 b1-00357213 122639-102551 10206 fla Out 25.1 8347 8311 8323 18 02:33 r1-00357213 122639-102551 10206 fla Out 25.1 8347 8311 8323 19 02:35 r1-00357214 122639-102551 10206 fla Out 25.1 8347 8311 8323 20 02:35 b1-00357214 122639-102551 10206 fla Out 25.1 8347 8311 8323 21 02:37 b1-00357215 122639-102551 10206 fla Out 25.1 8347 8311 8323 22 02:37 r1-00357215 122639-102551 10206 fla Out 25.1 8347 8311 8323 23 02:43 r1-00357216 122639-102551 10206 fla Out 25.1 8347 8311 8323 24 02:43 b1-00357216 122639-102551 10206 fla Out 25.1 8347 8311 8323 25 02:45 b1-00357217 122639-102551 10206 arc Lef 4.1 8347 8311 8323 HART 26 02:45 r1-00357217 122639-102551 10206 arc Lef 4.1 8347 8311 8323 HART 27 02:46 b1-00357218 122639-102551 10206 arc Rig 4.1 8347 8311 8323 HART 28 02:46 r1-00357218 122639-102551 10206 arc Rig 4.1 8347 8311 8323 HART 29 02:47 b1-00357219 122639-102551 10206 arc Out 4.1 8716 8681 8693 30 02:47 r1-00357219 122639-102551 10206 arc Out 4.1 8716 8681 8693 31 02:50 b1-00357220 122639-102551 10206 sci Out 900.1 8716 8681 8693 32 02:50 r1-00357220 122639-102551 10206 sci Out 900.1 8716 8681 8693 ---- BOSS Spectrographs Collimation ---- Time Field-Design Temp R off B off Move Resid ================================================================================ 00:43:26 -999--999 8.3 -1979 2.8 -1439 -1.7 02:33:00 102551-122639 7.9 659 -6.2 1325 -2.1 02:46:53 102551-122639 7.7 1319 1.8 370 3.0 ---- Weather Log ---- Time Field-Design Temp DP Diff Humid Wind Dir 1μm Dust IRSC σ IRSC μ ================================================================================ 03:05:31 nan-nan 0.0 0.0 0.0 100.0 13.2 286 nan 4.2 342 ---- Time Tracking ---- *=*=*= Observatory: APO *=*=*= MJD: 60103 Fill night time in Hours below *=*=*= Total bright time : 5.8 *=*=*= Bright time, queued observations : 0.2 *=*=*= Bright time, commissioning/engineering: 0 *=*=*= Bright time lost to weather : 0 *=*=*= Bright time lost to technical issues : 5.6 *=*=*= Total dark time : 2.6 *=*=*= Dark time, queued observations : 0 *=*=*= Dark time, commissioning/engineering : 0 *=*=*= Dark time lost to weather : 0 *=*=*= Dark time lost to technical issues : 2.6