Date: Fri, 6 Jan 2023 16:04:15 -0700
Subject: Re: [sloan-25mlog 6454] 2.5m obslog 20230102 (SJD 59947)
From: John Downey
Sounds good Dmitry, I'll try that on Monday.
John
On 1/6/23 13:05, Dmitry Bizyaev wrote:
> Hi John,
> it shows results for current MJD if dome flats or quartz flats
> were taken for this MJD, at least once. If not, the data points
> are not shown. I just tried to run those two scripts, and
> the page shows 59951 in the plots, but the last data points
> were for yesterday (MJD = 59950).
> Also, if the plot page is not updated after reloading,
> try to reload with "shift" held at the same time.
> Please let me know if it works.
> Dmitry
>
>
>> I tried this but refresh does not seem to update the MTP plot page.  When I
>> this around 10:30, before the SJD roll over neither updated but when I came
>> back after the roll over they had (dome flat showed no new data however).
>> Once I did the cleaning and tried running the scripts again I get no update on
>> the final step.  Is it waiting for the SJD change?
>>
>> Thanks,
>> John
>>
>>> On Jan 4, 2023, at 5:45 PM, Dmitry Bizyaev  wrote:
>>>
>>>> Will the MTP status page use the most recent calibration if we refresh the
>>>> page after the cal completes?  Are a dozen or so extra cals going to cause
>>>> any
>>>> operational problems?
>>> Hi John,
>>> the page shows the transparency for the
>>> *last* DomeFlat taken for each MJD, but only if the
>>> script has been run for it. Because of the
>>> recent system slowness, the dome flat script
>>> was started just once a day.
>>> If somebody intends to see the fiber transparency
>>> in the real time, take a flat, then run the
>>> script as follows:
>>>
>>> 1 log in as observer to sdss5-hub machine
>>>   (the password is standard, but if not sure, just ask observers)
>>>
>>> 2 cd ~/public_html
>>>
>>> 3 ./fps_monitor_d.py
>>>    wait until it ends (~20 sec)
>>>
>>> 4 ./fps_monitor_q.py
>>>    wait until it ends (~20 sec)
>>>
>>> 5 refresh the page with the plots
>>>
>>> Best wishes,
>>> Dmitry
>>>
>>>
>>>
>>
>