Subject: Re: [sloan-25mlog 6454] 2.5m obslog 20230102 (SJD 59947)
From: John
Date: Thu, 5 Jan 2023 16:00:25 -0700
Hi Dmitry,
I tried this but refresh does not seem to update the MTP plot page.  =
When I this around 10:30, before the SJD roll over neither updated but =
when I came back after the roll over they had (dome flat showed no new =
data however).  Once I did the cleaning and tried running the scripts =
again I get no update on the final step.  Is it waiting for the SJD =
change?
Thanks,
John
> On Jan 4, 2023, at 5:45 PM, Dmitry Bizyaev  wrote:
>=20
>> Will the MTP status page use the most recent calibration if we =
refresh the
>> page after the cal completes?  Are a dozen or so extra cals going to =
cause any
>> operational problems?
>=20
> Hi John,
> the page shows the transparency for the
> *last* DomeFlat taken for each MJD, but only if the
> script has been run for it. Because of the
> recent system slowness, the dome flat script
> was started just once a day.
> If somebody intends to see the fiber transparency
> in the real time, take a flat, then run the
> script as follows:
>=20
> 1 log in as observer to sdss5-hub machine
>  (the password is standard, but if not sure, just ask observers)
>=20
> 2 cd ~/public_html
>=20
> 3 ./fps_monitor_d.py
>   wait until it ends (~20 sec)
>=20
> 4 ./fps_monitor_q.py
>   wait until it ends (~20 sec)
>=20
> 5 refresh the page with the plots
>=20
> Best wishes,
> Dmitry
>=20
>=20
>=20