Subject: Re: [sloan-25mlog 5985] 2.5m obslog 20220407 (SJD 59677)
From: Ryan Wagner
Date: Fri, 8 Apr 2022 14:56:54 -0600
--Apple-Mail=_0AAA79F6-0788-4D99-A61D-42325F1C54C2
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
	charset=utf-8
After a lot of trouble shooting (without James) we were unable to figure =
out why the =E2=80=98fast=E2=80=99 switch isn=E2=80=99t working as it =
should:
There is a relay in the enclosure motion controller box that does not =
activate when the switch is in the F position.=20
We believe it has something to do with the control board not allowing =
the switch to activate for the east controller since it works fine for =
the west control.
I think James will have to inspect the board for any shorts or blown =
resistors on the board itself.=20
Since observations are not impeded by the building moving a little =
slower this task can wait for James to be back onsite on Monday.
Thanks for your understanding.
Ryan
> On Apr 8, 2022, at 05:32, doravetz@apo.nmsu.edu wrote:
>=20
> ---- Engineering Issues ----
>=20
> The 'F' setting on the east hand-held enclosure drive controller isn't =
working. The enclosure rolling speed in 'F' is the same as it is in 'S'. =
On the west hand-held controller, the 'F' works as expected.
--Apple-Mail=_0AAA79F6-0788-4D99-A61D-42325F1C54C2
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
	charset=utf-8
After=
 a lot of trouble shooting (without James) we were unable to figure out =
why the =E2=80=98fast=E2=80=99 switch isn=E2=80=99t working as it =
should:There is a relay in the enclosure motion =
controller box that does not activate when the switch is in the F =
position. We believe it has something to do =
with the control board not allowing the switch to activate for the east =
controller since it works fine for the west control.I think James will have to inspect the board for any shorts =
or blown resistors on the board itself. Since observations are not =
impeded by the building moving a little slower this task can wait for =
James to be back onsite on Monday.Thanks for your =
understanding.RyanOn Apr 8, 2022, at 05:32, doravetz@apo.nmsu.edu=
 wrote:---- =
Engineering Issues ----The 'F' setting on the east hand-held enclosure drive =
controller isn't working. The enclosure rolling speed in 'F' is the same =
as it is in 'S'. On the west hand-held controller, the 'F' works as =
expected.=
--Apple-Mail=_0AAA79F6-0788-4D99-A61D-42325F1C54C2--