Subject: 2.5m obslog 20220103 (SJD 59583) From: kpan@apo.nmsu.edu Date: Tue, 4 Jan 2022 13:06:57 +0000 (UTC) APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Monday January 03, 2022 (SJD 59583) ---- Observing Team ---- Dan Oravetz Kaike Pan On Zoom: Karen, Dylan, Dmitry ---- Observing Plan ---- https://wiki.sdss.org/display/COM/Commissioning+Nightly+Plan#CommissioningNightlyPlan-MondayJanuary3 If clear, by priority: (1) when Jose is present, observe APOGEE field at non-zero PA from https://data.sdss5.org/sas/sdsswork/target/commissioning_design/fps_position/fps_position_fields_10_pa/designs.html, and assess whether light is going down fibers (2) choose an APOGEE field from https://data.sdss5.org/sas/sdsswork/target/commissioning_design/fps_position/fps_position_fields_10/designs.html which will be at low airmass for several hours and observe: a) an AB dither pair, 42 reads each (for a full pipeline test), b) a long dither sequence with FVC images for 12 positions, then without FVC for another 12 (3) if non-zero PA (from 1) worked (assessment by Jose/Holtz), do a dither sequence on a non-zero PA field at low airmass (4) choose a BOSS field that is and will remain at low airmass for several hours and observe a) an undithered focus sequence (-100,-50,0,50,100), b) a long dither sequence ---- Observing Summary ---- With some high thin clouds with moderate seeing, we observed: apogee design 35891: five apogee exposures. test non-zero PA apogee design 36081, obtained three exposures on this. The guider cloud not get guider-rms down to 0.07". To test whether is field has an issue with guiding, we load a zero PA design, 35929, on the same field, and obtain one exposure on the design. The guide-rms on the zero PA design is good. Apogee design 35929: five exposure with M2 focus at -100, -50, 0, 50 100 um from the best focus. then a long (24 points) dither sequence (configuration dither 0.15). BOSs design 35956: five exposure with M2 focus at -100, -50, 0, 50 100 um from the best focus. then 16 robot dither sequence (configuration dither 0.15). Notes: ====== 1. Started from Jan. 1st, the chiller pressure is running a little high. Tonight it is at 47.5 PSI. 2. P0608 and P0187 were disabled from last night, continue to operate with them disabled. 3. MCP interprets altitude index positions incorrectly: 09:08:04 Alt: ind=4, deg= 60.4, err= -96 09:41:00 Alt: ind=4, deg= 61.0, err= 162598 ---- Observing Log ---- AFTERNOON CHECKOUT: =================== The leftover snow and ice around the enclosure and rails has melted a lot during the day so far, but there's still quite a lot of ice on the west end of the enclosure. Some of the absorbent pads along the west side of the enclosure are still frozen to the floor, too. We scraped them off with a shovel as best we could. APOGEE evening cals (+ FPI) and BOSS cals taken. Mirror numbers in spec. FPS/GFAs powered-up. Restarted STUI at the telescope laptop. The BOSS flat (exp #335885) XMID value (2052.6) is out-of-spec according to SOS. Do we need to adjust the SOS tolerances or adjust the collimator tilt to adjust XMID? Positioners are homed: 23:10:30 CmdStarted: APO.doravetz 65 jaeger unwind --status 23:10:30 APO.doravetz 65 jaeger > 23:10:30 APO.doravetz 65 jaeger i folded=T 23:10:30 APO.doravetz 65 jaeger : text="All positioners are folded." 23:15Z - Started ventilation. There's a band of clouds over us, but the clear sky clock indicates we should have clear skies later. 00:00Z: did more ice remove on the west side of the enclosure to get enclosure move. NIGHT: ====== 00:27Z: open. 01:21:13 CmdDone: APO.doravetz 75 jaeger configuration load 35883 Immediately upon goto-field: 01:21:26 .jaeger 0 jaeger f text="A collision was detected in positioner 493. Sending SEND_TRAJECTORY_ABORT and locking the FPS." Snapshot 0002 shows everything still at home (no actual collision), but P0493 is pink. After seeing the HA of that field, chose a field that's almost an hour east: 01:26:22 CmdDone: APO.doravetz 83 jaeger configuration load 35891 01:27:28 CmdDone: APO.doravetz 84 jaeger configuration execute 01:27:28 APO.doravetz 84 jaeger i text="All positioners have reached their destinations." 01:27:57 CmdStarted: APO.doravetz 85 hal goto-field -s slew,fvc FVC Loop: 01:28:52 CmdStarted: APO.doravetz.jaeger 585 jaeger fvc loop 01:29:18 APO.doravetz.jaeger 585 jaeger i fvc_rms=56.24 01:30:02 APO.doravetz.jaeger 585 jaeger i fvc_rms=12.96 01:30:02 APO.doravetz.jaeger 585 jaeger i fvc_deltarms=43.28 01:30:45 APO.doravetz.jaeger 585 jaeger i fvc_rms=10.92 01:30:45 APO.doravetz.jaeger 585 jaeger i fvc_deltarms=2.04 01:31:27 APO.doravetz.jaeger 585 jaeger i fvc_rms=10.59 01:31:27 APO.doravetz.jaeger 585 jaeger i fvc_deltarms=0.33 01:31:44 CmdDone: APO.doravetz.jaeger 585 jaeger fvc loop Halted the axes and started tried two more 'fvc loop' sequences, but fvc_rms only got down to ~10-11 um rms: 01:32:25 CmdStarted: APO.doravetz 87 jaeger fvc loop 01:32:51 APO.doravetz 87 jaeger i fvc_rms=16.68 01:33:35 APO.doravetz 87 jaeger i fvc_rms=11.47 01:33:35 APO.doravetz 87 jaeger i fvc_deltarms=5.21 01:34:17 APO.doravetz 87 jaeger i fvc_rms=11.16 01:34:17 APO.doravetz 87 jaeger i fvc_deltarms=0.31 01:34:34 CmdDone: APO.doravetz 87 jaeger fvc loop 01:34:44 CmdStarted: APO.doravetz 88 jaeger fvc loop 01:35:10 APO.doravetz 88 jaeger i fvc_rms=11.02 01:35:53 APO.doravetz 88 jaeger i fvc_rms=11.24 01:35:53 APO.doravetz 88 jaeger i fvc_deltarms=-0.22 01:36:11 CmdDone: APO.doravetz 88 jaeger fvc loop Restarted tracking. Started cherno, but got the following error: 01:37:51 APO.doravetz 91 cherno f error="Command 'acquire -c -t 30 --full' failed because of an uncaught error 'FileNotFoundError: [Errno 2] No such file or directory: String('/data/gcam/59583/gimg-gfa6n-0001.fits')'. See traceback in the log for more information." 01:37:51 CmdDone: APO.doravetz 91 cherno acquire -c -t 30 --full Verified /data/gcam/59583/ exists (it does now because the first image is in there). Issued a 'cherno stop' then restarted cherno. Focus sweep: best focus = 56 um ==> 1.31 arcsec fwhm: 01:48:44 APO.doravetz 98 cherno i astrometry_fit=12,5,-999.0,-999.0,1.31,0.12,-0.008,0.028,0.003,0.2,0.999762 guide_rms looks reasonable: 02:03:14 APO.doravetz 118 cherno d guide_rms=28,0.048,0.074,0.089 Manually opened APOGEE Shutter and started exposure: 02:03:08 CmdStarted: APO.doravetz 120 apogee expose nreads=42; object=Object; comment=\"35891\": apwRaw-40210010-11 02:30Z: start a long dither sequence without FVC images for 12 positions Loop these commands 12 times jaeger configuration dither 0.15 apogee dither namedpos=A apogee expose nreads=42 object=Object apogee dither namedpos=B apogee expose nreads=42 object=Object jaeger configuration reverse we stopped the sequence for Jose's test on non-zero PA fields. Apogee images: 40210012-17. take an apogee dome flat: 40210018. we are still running with P0608 and P0187 disabled. 3:22:53 CmdStarted: APO.doravetz 172 jaeger configuration load 36081 03:29:51 CmdStarted: APO.doravetz 181 hal goto-field -s slew,reconfigure,fvc,acquire,guide,cleanup We asked what does "cleanup" does, here is Jose's reply: The cleanup stage always runs at the end, even if the macro fails. It does some cleanup and leaves the system in a good state. For example in the goto-field macro it turns off the lamps and I think leaves the FFS in its original state. fvc loop: 03:31:46 APO.doravetz.jaeger 602 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0010.fits" 03:32:30 APO.doravetz.jaeger 602 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0011.fits" 03:33:13 APO.doravetz.jaeger 602 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0012.fits" 03:33:55 APO.doravetz.jaeger 602 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0013.fits" 03:31:49 APO.doravetz.jaeger 602 jaeger i fvc_rms=56.31 03:32:33 APO.doravetz.jaeger 602 jaeger i fvc_rms=13.71 03:33:16 APO.doravetz.jaeger 602 jaeger i fvc_rms=12.59 03:33:58 APO.doravetz.jaeger 602 jaeger i fvc_rms=12.4 jaeger 602 jaeger i fvc_deltarms=0.19 but the goto-field failed with error: 03:34:27 APO.doravetz 181 hal e error='TronKey'; UNPARSEDTEXT="object has no attribute 'values'" 03:34:27 APO.doravetz 181 hal d stage_status=goto_field,slew,finished,reconfigure,finished,fvc,finished,acquire,failed,guide,waiting,cleanup,waiting 03:34:27 APO.doravetz 181 hal w text="Running cleanup tasks." 03:34:27 APO.doravetz 181 hal d stage_status=goto_field,slew,finished,reconfigure,finished,fvc,finished,acquire,failed,guide,waiting,cleanup,active 03:34:27 APO.doravetz 181 hal d stage_status=goto_field,slew,finished,reconfigure,finished,fvc,finished,acquire,failed,guide,waiting,cleanup,finished 03:34:27 APO.doravetz 181 hal d running_macros 03:34:27 APO.doravetz 181 hal f 03:34:27 CmdDone: APO.doravetz 181 hal goto-field -s slew,reconfigure,fvc,acquire,guide,cleanup Did another fvc loop and got rms down to 3.3 um. 3:36:31 APO.doravetz 194 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0014.fits" 03:36:34 APO.doravetz 194 jaeger i fvc_rms=3.3 The guider struggle to get guide rms down. It's floating around 0.13, could not get down to 0.07. Tried to set rotator offset +/- 1 arcminutes to see if it helps. It doesn't help much. the guide rms still at 0.15. Start science exposure anyway. 04:04:22 CmdStarted: APO.doravetz 248 apogee expose nreads=42; object=Object; comment=\"36081\" apRaw-40210019. Take another 30 read exposure. apRaw-40210020 Compared to other zero PA field, fewer fibers see fluxes. Part of this could be due to the telescope focus drift. We will refocus the telescope after this exposure. Refocus the telescope, it is found the focus drifted by 200 um. The best focus is at 240 um now. The guider fwhm down to 1.36 from 2.0". but the guide rms goes up from 0.15" to 0.3". Started another 30 reads apogee exposure. apRaw-40210021. To test whether the guiding will be better for the same field but with zero PA. 4:43:23 CmdDone: APO.doravetz 318 jaeger configuration load 35929. 04:43:23 APO.doravetz 318 jaeger : text="Configuration 1228 loaded." 4:43:45 APO.doravetz 321 hal i stages=goto_field,slew,reconfigure,fvc,cleanup 04:43:45 APO.doravetz 321 hal e error="Command jaeger configuration execute failed." 4:43:45 APO.doravetz 321 hal f 04:43:45 CmdDone: APO.doravetz 321 hal goto-field -s slew,reconfigure,fvc,cleanup 04:50:09 APO.doravetz 336 jaeger i fvc_rms=68.02 04:50:54 APO.doravetz 336 jaeger i fvc_rms=31.75 04:51:35 APO.doravetz 336 jaeger i fvc_rms=30.37 04:52:16 APO.doravetz 336 jaeger i fvc_rms=29.65 04:53:15 APO.doravetz 337 jaeger i fvc_rms=4.24 04:50:06 APO.doravetz 336 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0015.fits" 04:50:51 APO.doravetz 336 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0016.fits" 04:51:32 APO.doravetz 336 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0017.fits" 04:52:13 APO.doravetz 336 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0018.fits" 04:53:12 APO.doravetz 337 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0019.fits" The guider converge quickly to guide rms of 0.07". 04:55:50 CmdStarted: APO.doravetz 345 apogee expose nreads=30; object=Object; comment=\"35929\": apRaw-40210021. Per Jose and JonH, we don't need to take fvc images between configuration reverse and configuration dither. We decided to do another focus sweep. The best focus is at 200 um. Then perform the item 4 on the plan: choose a BOSS/APOGEE field that is and will remain at low airmass for several hours and observe a) an undithered focus sequence (-100,-50,0,50,100), b) a long dither sequence. set focus at 100 um: 5:24:30 CmdStarted: APO.doravetz 382 apogee expose nreads=30; object=Object; comment=\"35929 (-100 um from best foc)\", apRaw-40210010023. apRaw-40210010023. -100 from the best focus. apRaw-40210010024. -50 from the best focus. apRaw-40210010025. at the best focus. apRaw-40210010026. +50 from the best focus. apRaw-40210010027. +100 from the best focus. We did focus sweep after the five exposures on different M2 position, and confirm that the best focus doesn't change. The best focus is still at 200 um. Started long (robot) dither sequence: 24 0.15 mm dither sequence. jaeger configuration dither 0.15 apogee expose nreads=30 object=Object jaeger configuration reverse Associated configuration IDs are: 1229 - 1252, apogee exposures are apRaw-40210028-0051. Take another dome flat: pRaw-40210028-0052. Unwind positioners. jaeger configuration load 35962, a BOSS field. 08:51:26 CmdStarted: APO.doravetz 494 jaeger configuration execute 08:51:30 APO.doravetz 494 jaeger f error="Trajectory failed with error: Something went wrong sending the trajectory: At least one SEND_TRAJECTORY_COMMAND failed" 08:51:30 CmdDone: APO.doravetz 494 jaeger configuration execute The snap shot 832 shows that all robots are still in folded position. 8:51:58 APO.doravetz 496 jaeger f error="Trajectory failed with error: Something went wrong sending the trajectory: At least one SEND_TRAJECTORY_COMMAND failed" 08:51:58 CmdDone: APO.doravetz 496 jaeger configuration execute 8:52:45 CmdStarted: APO.doravetz 499 jaeger configuration load 35962 "Configuration 1254 loaded." 08:54:38 CmdStarted: APO.doravetz 500 jaeger configuration execute 08:54:42 APO.doravetz 500 jaeger f error="Trajectory failed with error: Something went wrong sending the trajectory: At least one SEND_TRAJECTORY_COMMAND failed" 08:54:42 CmdDone: APO.doravetz 500 jaeger configuration execute 09:01:55 APO.doravetz 507 jaeger i configuration_snapshot=/data/logs/jaeger/configuration_snapshots/59583/configuration_snapshot_59583_1256.pdf Jaeger reports a issue with the positioner 448. Try to load a different field to see if positioner 448 will have the same issue. 9:01:54 CmdDone: APO.doravetz 507 jaeger configuration load 35966 09:05:04 CmdStarted: APO.doravetz 513 jaeger configuration load 35966 09:06:12 APO.doravetz 513 jaeger : text="Configuration 1257 loaded." 09:06:15 CmdStarted: APO.doravetz 514 jaeger configuration execute 09:08:18 APO.doravetz 518 hal i all_stages=goto_field,prepare,slew,reconfigure,boss_hartmann,fvc,boss_arcs,boss_flat,acquire,guide,cleanup 09:10:53 APO.doravetz.jaeger 639 jaeger i fvc_rms=51.02 09:11:37 APO.doravetz.jaeger 639 jaeger i fvc_rms=16.57 09:12:18 APO.doravetz.jaeger 639 jaeger i fvc_rms=15.32 09:13:00 APO.doravetz.jaeger 639 jaeger i fvc_rms=15.04 09:10:50 APO.doravetz.jaeger 639 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0020.fits" 09:11:34 APO.doravetz.jaeger 639 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0021.fits" 09:12:15 APO.doravetz.jaeger 639 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0022.fits" 09:12:57 APO.doravetz.jaeger 639 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0023.fits" rms stopped at 15 um. Try another fvc loop. 09:13:59 APO.doravetz 520 jaeger i fvc_rms=6.84 09:14:40 APO.doravetz 520 jaeger i fvc_rms=4.15 09:13:56 APO.doravetz 520 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0024.fits" 09:14:38 APO.doravetz 520 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0025.fits" The astrometry fit doesn't give solution on all GFAs. Checked GFA images, but GFA images have enough stars, not sure why. Did another focus sweep, the best focus is at 240 um, not far from where it is set. But the seeing is not great at 2.0". Try a different field. 09:37:55 CmdStarted: APO.doravetz 558 jaeger configuration load 35956 9:38:45 APO.doravetz 558 jaeger : text="Configuration 1260 loaded." 09:40:32 APO.doravetz 560 hal i stages=goto_field,prepare,slew,boss_hartmann,fvc,boss_arcs,boss_flat,cleanup 09:43:23 APO.doravetz.jaeger 654 jaeger i fvc_rms=64.58 09:44:04 APO.doravetz.jaeger 654 jaeger i fvc_rms=21.65 09:44:46 APO.doravetz.jaeger 654 jaeger i fvc_rms=10.54 09:45:27 APO.doravetz.jaeger 654 jaeger i fvc_rms=7.46 09:46:09 APO.doravetz.jaeger 654 jaeger i fvc_rms=7.01 09:43:20 APO.doravetz.jaeger 654 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0026.fits" 09:44:02 APO.doravetz.jaeger 654 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0027.fits" 09:44:43 APO.doravetz.jaeger 654 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0028.fits" 09:45:24 APO.doravetz.jaeger 654 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0029.fits" 09:46:06 APO.doravetz.jaeger 654 jaeger i text="[FVC]: Processing raw image /data/fcam/59583/fimg-fvc1n-0030.fits" BOSS hartmann, cals are good. 09:42:57 Hartmann collimate output on cart #19 sp1: offset: r= -659 (In Focus); b= 0.8 (In Focus) sp1: pred. move: spAverageMove= -458 sp1: pred. resid: r= -201, b= -0.6, txt= OK, spTemp = 2.3 09:47:01 boss exposure 4.0, file=335888 09:48:33 boss exposure 25.0, file=335889 The guider could not find solutions on this field neither. visual check GFA images and confirms there are enough stars. But stars are elongated. I noticed that altitude has a big fiducical error, we thought that is mis-read, and a close look find that mcp interpret latitude fiducial index incorrectly. 9:08:04 Alt: ind=4, deg= 60.4, err= -96 09:41:00 Alt: ind=4, deg= 61.0, err= 162598 error is too large to be corrected ( > 600) We put 0.5 deg in the cal ofset and see star image get better. This indicated that the telescope was tracking at wrong spot. We decided to accept the fiducial error, and slew away and slew back to make fiducial correction. Then astrometry fit give solutions. we did another focus sweep, the best focus is at 227 is the best focus. The decided to a focus sequence of -100, -50, 0, 50, 100 on the paraent configuration. The corresponding BOSS exposures are 10:14:57 boss exposure 300.0, file=335890 - 94. 10:49Z: started 12 points dither, i.e. loop command below 16 times. jaeger configuration dither 0.15 boss exposure science itime=300 jaeger configuration reverse The corresponding configuration IDs are 1261-1276, and asscocated boss data frames are boss exposure 300.0, file=335895 - 910. 12:53: it is 15 deg twilight now. wrap up for the night. unwind, power off FPS. 13:00Z: close and start apogee morning cal. ---- BOSS Spectrographs Collimation Summary ---- Afternoon focus check: 20:07:31 APO.doravetz 55 hartmann i text="got hartmann left exposure 335882" 20:08:11 APO.doravetz 55 hartmann i text="got hartmann right exposure 335883" 20:08:11 APO.doravetz 55 hartmann i text="Processing cameras: r1, b1" 20:08:11 APO.doravetz 55 hartmann i status="waiting on files" 20:08:12 APO.doravetz 55 hartmann i status="processing" 20:08:18 APO.doravetz 55 hartmann i r1MeanOffset=-0.10,"In Focus" 20:08:18 APO.doravetz 55 hartmann i r1PistonMove=-659 20:08:18 APO.doravetz 55 hartmann i b1MeanOffset=0.06,"In Focus" 20:08:18 APO.doravetz 55 hartmann i b1RingMove=-1.2 20:08:18 APO.doravetz 55 hartmann i sp1Residuals=-522,-1.6,"OK" 20:08:18 APO.doravetz 55 hartmann i sp1AverageMove=-137 ---- Mirror Numbers ---- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A: 0.0020 0.0040 Axial B: 0.0150 0.0030 Axial C: -0.1130 -0.1150 Trans D: -0.0342 -0.0338 Lateral E: 0.3315 0.3315 Lateral F: 0.5350 0.5350 GALILS Commanded: 12500 -1600 5300 47050 -8800 -8400 Actual: 12500 -1600 5300 47050 -8800 -8400 SETMIR VALUES PrimDesOrient: 0.0 -59.5 -9.15 -512.0 1906.3 PrimOrient: 1.07 -59.51 -9.21 -512.13 1906.31 SECONDARY: ---------- Focus: 0.0000 Air temp: 0.50 Altitude: 30.0 MIGS TONIGHT NOMINAL Axial A: -9.6560 -9.6570 Axial B: -9.6680 -9.6710 Axial C: -9.6940 -9.6970 Trans D: 0.1020 0.1140 GALILS Commanded: 4894715 4893219 4912319 -2 -3401 Actual: 4858959 4858890 4858720 0 -3400 SETMIR VALUES SecDesOrient: 3857.0 0.0 0.0 0.0 42.22 SecOrient: 3856.91 0.04 -0.02 -0.01 42.84 ---- Telescope Status ---- Status at: 13:15Z Telescope stowed at: 121.0, 30.0, 0.0 mount Instrument mounted: fps Counterweights at: 684 686 704 704 LN2 autofill systems: Connected and turned on 180L LN2 dewar scales: SP1 187 lbs, 23.3 psi ---- Software Used ---- --- Afternoon disk space --- (observers39) [observer@sdss5-hub: ~]$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb1 2.0T 155G 1.9T 8% /home 10.25.1.230:/data 21T 18T 2.9T 86% /data --- STUI software --- STUI : 1.7.14 alerts : 2.2.0 apo : 3.0.1 boss : 6.0.1-alpha.0 -boss.specMec : FAILED guider : 4.0.0 ecamera : FAILED fliswarm : 0.1.1-alpha.0 jaeger : 0.13.1-alpha.0 kaiju : 1.2.0-alpha.3 coordio : 1.1.4-alpha.2 fps_calibrati : APO.2021.12.25 cherno : 0.1.0-alpha.0 hal : 0.1.0-alpha.0 hartmann : 2.0.1-alpha.0 hub : 5.0.0a0 mcp : 2.1 -mcp.plc : 34 -mcp.azFiduci : v1_148 -mcp.altFiduc : v1_148 -mcp.rotFiduc : v1_148 tcc : 1.4.0 apogee : not availble apogeecal : not availble apogeeql : v1_7_0dev STUIAdditions : nosop --- Other versions --- sdss-obstools : 3.7.6 TPM : 1.2-31-gd7eb MCP : 2.1 idlspec2d : v6_0_4 Kronos : FAILED roboscheduler : FAILED ---- APOGEE Data Summary ---- 59582 morning cals ================== (observers39) [observer@sdss5-hub: ~]$ list_ap -m 59582 APOGEE data list, mjd=59582, all raw_data: /data/apogee/utr_cdr/59582/apRaw-*.fits archive: /data/apogee/archive/59582/apR-[a,b,c]-*.apz quickred: /data/apogee/quickred/59582/apq-*.fits ------------------------------------------------------------------------------ mjd i UT File/Exp Imtype Nread A/B Dth Ct-Plate Arch Offset %Flux Comm ------------------------------------------------------------------------------ 59582 10 11:42 40200010 Dark 60 A 13.0 FPS- 0 a-b-c - - 59582 11 11:52 40200011 Dark 60 A 13.0 FPS- 0 a-b-c - - 59582 12 12:03 40200012 Dark 60 A 13.0 FPS- 0 a-b-c - - 59582 13 12:05 40200013 QuarFlat 10 A 13.0 FPS- 0 a-b-c - 100 59582 14 12:07 40200014 QuarFlat 10 A 13.0 FPS- 0 a-b-c - 100 59582 15 12:09 40200015 QuarFlat 10 A 13.0 FPS- 0 a-b-c - 101 59582 16 12:11 40200016 Arc-Thar 12 A 13.0 FPS- 0 a-b-c -0.09 - 59582 17 12:18 40200017 Arc-Une 40 A 13.0 FPS- 0 a-b-c - - 59582 18 12:20 40200018 Arc-Thar 12 B 13.5 FPS- 0 a-b-c 0.51 - 59582 19 12:28 40200019 Arc-Une 40 B 13.5 FPS- 0 a-b-c - - 59582 20 12:33 40200020 Dark 30 A 13.0 FPS- 0 a-b-c - - 59582 21 12:38 40200021 InteFlat 30 A 13.0 FPS- 0 a-b-c - 279 59582 22 12:44 40200022 InteFlat 30 A 13.0 FPS- 0 a-b-c - 280 59582 23 12:49 40200023 InteFlat 30 A 13.0 FPS- 0 a-b-c - 279 59582 24 12:55 40200024 Dark 30 A 13.0 FPS- 0 a-b-c - - ------------------------------------------------------------------------------ APOGEE data list, mjd=59583, all raw_data: /data/apogee/utr_cdr/59583/apRaw-*.fits archive: /data/apogee/archive/59583/apR-[a,b,c]-*.apz quickred: /data/apogee/quickred/59583/apq-*.fits ------------------------------------------------------------------------------ mjd i UT File/Exp Imtype Nread A/B Dth Ct-Plate Arch Offset %Flux Comm ------------------------------------------------------------------------------ 59583 1 19:58 40210001 Dark 3 A 13.0 -------- a-b-c - - 59583 2 20:40 40210002 Dark 60 A 13.0 -------- a-b-c - - 59583 3 20:42 40210003 QuarFlat 10 A 13.0 FPS- 0 a-b-c - 100 59583 4 20:44 40210004 Arc-Thar 12 B 13.5 FPS- 0 a-b-c 0.51 - 59583 5 20:52 40210005 Arc-Une 40 B 13.5 FPS- 0 a-b-c - - 59583 6 20:54 40210006 Arc-Thar 12 A 13.0 FPS- 0 a-b-c -0.11 - 59583 7 21:01 40210007 Arc-Une 40 A 13.0 FPS- 0 a-b-c - - 59583 8 21:12 40210008 Dark 60 A 13.0 -------- a-b-c - - 59583 9 23:09 40210009 Arc---- 30 A 13.0 FPS- 0 a-b-c - - FPI 59583 10 02:10 40210010 Object 42 A 13.0 FPS- 0 a-b-c -0.11 - 35891 59583 11 02:19 40210011 Object 42 B 13.5 FPS- 0 a-b-c 0.40 - 35891 59583 12 02:37 40210012 Object 42 A 13.0 FPS- 0 a-b-c -0.10 - 59583 13 02:45 40210013 Object 42 B 13.5 FPS- 0 a-b-c 0.40 - 59583 14 02:53 40210014 Object 42 A 13.0 FPS- 0 a-b-c -0.10 - 59583 15 03:00 40210015 Object 42 B 13.5 FPS- 0 a-b-c 0.40 - 59583 16 03:08 40210016 Object 42 A 13.0 FPS- 0 a-b-c -0.10 - 59583 17 03:16 40210017 Object 42 B 13.5 FPS- 0 a-b-c 0.40 - 59583 18 03:27 40210018 DomeFlat 5 B 13.5 FPS- 0 a-b-c - 122 59583 19 04:11 40210019 Object 42 B 13.5 FPS- 0 a-b-c 0.39 - 36081 59583 20 04:17 40210020 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 36081 59583 21 04:32 40210021 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 36081 59583 22 05:00 40210022 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 35929 59583 23 05:29 40210023 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 35929 (- 59583 24 05:37 40210024 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 25 05:42 40210025 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 59583 26 05:48 40210026 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 27 05:53 40210027 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 28 06:15 40210028 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 29 06:21 40210029 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 30 06:27 40210030 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 31 06:33 40210031 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 59583 32 06:39 40210032 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 33 06:45 40210033 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 59583 34 06:51 40210034 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 59583 35 06:57 40210035 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 36 07:03 40210036 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 59583 37 07:08 40210037 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 38 07:14 40210038 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 59583 39 07:20 40210039 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 40 07:26 40210040 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 41 07:32 40210041 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 42 07:38 40210042 Object 30 B 13.5 FPS- 0 a-b-c 0.40 - 59583 43 07:44 40210043 Object 30 B 13.5 FPS- 0 a-b-c 0.35 - 59583 44 07:50 40210044 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 45 07:56 40210045 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 46 08:02 40210046 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 47 08:08 40210047 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 48 08:14 40210048 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 49 08:19 40210049 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 50 08:25 40210050 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 51 08:31 40210051 Object 30 B 13.5 FPS- 0 a-b-c 0.41 - 59583 52 08:36 40210052 DomeFlat 5 B 13.5 FPS- 0 a-b-c - 125 ------------------------------------------------------------------------------ ---- eBOSS Data Summary ---- Reading FITS from /data/spectro//59583 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - n Time Filename crt plt flav shu Exp colA colB colC Hrt - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 19:57 r1-00335879 FPS-N None bia Clo 0.0 -7681 -7675 -7710 2 19:57 b1-00335879 FPS-N None bia Clo 0.0 -7681 -7675 -7710 3 20:00 r1-00335880 FPS-N None arc Lef 4.1 -7681 -7675 -7710 HART 4 20:00 b1-00335880 FPS-N None arc Lef 4.1 -7681 -7675 -7710 HART 5 20:01 b1-00335881 FPS-N None arc Rig 4.1 -7681 -7675 -7710 HART 6 20:01 r1-00335881 FPS-N None arc Rig 4.1 -7681 -7675 -7710 HART 7 20:07 b1-00335882 FPS-N None arc Lef 4.1 -5053 -5046 -5081 HART 8 20:07 r1-00335882 FPS-N None arc Lef 4.1 -5053 -5046 -5081 HART 9 20:07 b1-00335883 FPS-N None arc Rig 4.1 -5053 -5046 -5081 HART 10 20:07 r1-00335883 FPS-N None arc Rig 4.1 -5053 -5046 -5081 HART 11 20:09 r1-00335884 FPS-N None arc Out 4.1 -5190 -5183 -5218 12 20:09 b1-00335884 FPS-N None arc Out 4.1 -5190 -5183 -5218 13 20:11 r1-00335885 FPS-N None fla Out 30.1 -5190 -5183 -5218 14 20:11 b1-00335885 FPS-N None fla Out 30.1 -5190 -5183 -5218 15 09:41 b1-00335886 FPS-N None arc Lef 4.1 -5190 -5183 -5218 HART 16 09:41 r1-00335886 FPS-N None arc Lef 4.1 -5190 -5183 -5218 HART 17 09:42 r1-00335887 FPS-N None arc Rig 4.1 -5190 -5183 -5218 HART 18 09:42 b1-00335887 FPS-N None arc Rig 4.1 -5190 -5183 -5218 HART 19 09:47 r1-00335888 FPS-N None arc Out 4.1 -5648 -5642 -5678 20 09:47 b1-00335888 FPS-N None arc Out 4.1 -5648 -5642 -5678 21 09:48 b1-00335889 FPS-N None fla Out 25.1 -5648 -5642 -5678 22 09:48 r1-00335889 FPS-N None fla Out 25.1 -5648 -5642 -5678 23 10:14 r1-00335890 FPS-N None sci Out 300.1 -5648 -5642 -5678 24 10:14 b1-00335890 FPS-N None sci Out 300.1 -5648 -5642 -5678 25 10:22 b1-00335891 FPS-N None sci Out 300.1 -5648 -5642 -5678 26 10:22 r1-00335891 FPS-N None sci Out 300.1 -5648 -5642 -5678 27 10:28 b1-00335892 FPS-N None sci Out 300.1 -5648 -5642 -5678 28 10:28 r1-00335892 FPS-N None sci Out 300.1 -5648 -5642 -5678 29 10:35 b1-00335893 FPS-N None sci Out 300.1 -5648 -5642 -5678 30 10:35 r1-00335893 FPS-N None sci Out 300.1 -5648 -5642 -5678 31 10:42 r1-00335894 FPS-N None sci Out 300.1 -5648 -5642 -5678 32 10:42 b1-00335894 FPS-N None sci Out 300.1 -5648 -5642 -5678 33 10:49 r1-00335895 FPS-N None sci Out 300.1 -5648 -5642 -5678 34 10:49 b1-00335895 FPS-N None sci Out 300.1 -5648 -5642 -5678 35 10:56 r1-00335896 FPS-N None sci Out 300.1 -5648 -5642 -5678 36 10:56 b1-00335896 FPS-N None sci Out 300.1 -5648 -5642 -5678 37 11:03 r1-00335897 FPS-N None sci Out 300.1 -5648 -5642 -5678 38 11:03 b1-00335897 FPS-N None sci Out 300.1 -5648 -5642 -5678 39 11:10 r1-00335898 FPS-N None sci Out 300.1 -5648 -5642 -5678 40 11:10 b1-00335898 FPS-N None sci Out 300.1 -5648 -5642 -5678 41 11:17 r1-00335899 FPS-N None sci Out 300.1 -5648 -5642 -5678 42 11:17 b1-00335899 FPS-N None sci Out 300.1 -5648 -5642 -5678 43 11:24 r1-00335900 FPS-N None sci Out 300.1 -5648 -5642 -5678 44 11:24 b1-00335900 FPS-N None sci Out 300.1 -5648 -5642 -5678 45 11:31 b1-00335901 FPS-N None sci Out 300.1 -5648 -5642 -5678 46 11:31 r1-00335901 FPS-N None sci Out 300.1 -5648 -5642 -5678 47 11:38 r1-00335902 FPS-N None sci Out 300.1 -5648 -5642 -5678 48 11:38 b1-00335902 FPS-N None sci Out 300.1 -5648 -5642 -5678 49 11:45 r1-00335903 FPS-N None sci Out 300.1 -5648 -5642 -5678 50 11:45 b1-00335903 FPS-N None sci Out 300.1 -5648 -5642 -5678 51 11:52 r1-00335904 FPS-N None sci Out 300.1 -5648 -5642 -5678 52 11:52 b1-00335904 FPS-N None sci Out 300.1 -5648 -5642 -5678 53 11:59 r1-00335905 FPS-N None sci Out 300.1 -5648 -5642 -5678 54 11:59 b1-00335905 FPS-N None sci Out 300.1 -5648 -5642 -5678 55 12:06 r1-00335906 FPS-N None sci Out 300.1 -5648 -5642 -5678 56 12:06 b1-00335906 FPS-N None sci Out 300.1 -5648 -5642 -5678 57 12:15 r1-00335907 FPS-N None sci Out 300.1 -5648 -5642 -5678 58 12:15 b1-00335907 FPS-N None sci Out 300.1 -5648 -5642 -5678 59 12:22 r1-00335908 FPS-N None sci Out 300.1 -5648 -5642 -5678 60 12:22 b1-00335908 FPS-N None sci Out 300.1 -5648 -5642 -5678 61 12:32 b1-00335909 FPS-N None sci Out 300.1 -5648 -5642 -5678 62 12:32 r1-00335909 FPS-N None sci Out 300.1 -5648 -5642 -5678 63 12:41 b1-00335910 FPS-N None sci Out 300.1 -5648 -5642 -5678 64 12:41 r1-00335910 FPS-N None sci Out 300.1 -5648 -5642 -5678