Subject: Re: [sloan-25mlog 5465] 2.5m obslog 20210403 (SJD 59308) From: Ryan Wagner Date: Sun, 4 Apr 2021 13:54:21 -0600 --Apple-Mail=_F684C329-670D-4129-BC2E-D76E42606A49 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=utf-8 John,=20 I just cleaned off the cart 2 female connector and the male gang = connector as well as the dense pack female port. The cart 2 MTP=E2=80=99s = had a weird sheen to them, not sure what it was from but it went away = when I cleaned them. Hope that does the trick. Ryan > On Apr 4, 2021, at 12:12, Wilson, John C (jcw6z) = wrote: >=20 > Hi Ryan or Fred, >=20 > If possible could you please check the female gang connector on cart 2 = before observations tonight? The night log reported nearly 2/3 of the = fibers were missing and zero flux in the dome flat. Zero flux seems odd = since not all fibers were reported as missing. >=20 > Thanks, >=20 > John=20 >=20 >=20 >=20 > Get Outlook for iOS > From: sloan-25mlog on behalf of Dmitry = Bizyaev > Sent: Sunday, April 4, 2021 8:47:40 AM > To: kgrabowski@apo.nmsu.edu > Cc: obs-report-25m@apo.nmsu.edu ; = sdss_local@apo.nmsu.edu > Subject: [sloan-25mlog 5465] Re: 2.5m obslog 20210403 (SJD 59308) > =20 >=20 > > Obs 2 computer seems to be sending delayed commands when buttons are = pressed. > > Usually the CPU load of STUI is about 80%, but peaks above 100. >=20 > Just to notice that it happened once, during cart 8 change (loadCart = delayed > by a minute) >=20 > > Took 3 morning twilight flats with 5 reads each. >=20 > Started at 5 degrees morning twilight. > With 5 SUTR, their continuum level is zero. > Apparently, we need to take these flats after sunset to get > 10K in continuum. >=20 > Dmitry >=20 >=20 > ____________________________________________________________ > Logs of Nightly APO Activities > = https://trac.sdss.org/tracmailman/browser/private/sloan-25mlog/index.html = --Apple-Mail=_F684C329-670D-4129-BC2E-D76E42606A49 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=utf-8 John, I just cleaned off = the cart 2 female connector and the male gang connector as well as the = dense pack female port. The cart 2 MTP=E2=80=99s had a weird sheen to = them, not sure what it was from but it went away when I cleaned = them.Hope = that does the trick.RyanOn Apr 4, 2021, at 12:12, = Wilson, John C (jcw6z) wrote: Hi Ryan or Fred, If possible could you please check the female gang connector on cart 2 = before observations tonight? The night log reported nearly 2/3 of = the fibers were missing and zero flux in the dome flat. Zero flux = seems odd since not all fibers were reported as missing. Thanks, John Get Outlook for iOS From: = sloan-25mlog on behalf of Dmitry = Bizyaev Sent: Sunday, April 4, 2021 8:47:40 AM To: kgrabowski@apo.nmsu.edu Cc: obs-report-25m@apo.nmsu.edu ; sdss_local@apo.nmsu.edu Subject: [sloan-25mlog 5465] Re: 2.5m obslog 20210403 = (SJD 59308) > Obs 2 computer seems to be sending delayed commands when buttons = are pressed. > Usually the CPU load of STUI is about 80%, but peaks above 100. Just to notice that it happened once, during cart 8 change (loadCart = delayed by a minute) > Took 3 morning twilight flats with 5 reads each. Started at 5 degrees morning twilight. With 5 SUTR, their continuum level is zero. Apparently, we need to take these flats after sunset to get= 10K in continuum. Dmitry ____________________________________________________________ Logs of Nightly APO Activities https://trac.sdss.org/tracmailman/browser/private/sloan-25mlog/= index.html = --Apple-Mail=_F684C329-670D-4129-BC2E-D76E42606A49--