Subject: 2.5m obslog 20211223 (SJD 59572) From: kpan@apo.nmsu.edu Date: Fri, 24 Dec 2021 13:04:29 +0000 (UTC) APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Thursday December 23, 2021 (SJD 59572) ---- Observing Team ---- Viktor Malanushenko Kaike Pan Zoom: Dan, Audrey, Katie, Dmitry ---- Observing Plan ---- f clear, please continue taking dither sequences as in previous nights. It would be useful to have one sequence in which you take jaeger fvc loop --no-apply after each jaeger dither explode and jaeger configuration reverse (remember to halt the axes in each case). For the remaining dither sequences please do a full FVC loop on the undithered position, then dither without taking FVC images but after the last reverse, when you're back in the undithered position for the last time, please take an FVC loop with --no-apply. In an undithered configuration, take an exposure with optimal focus and additional exposures with focus at +25, +50, -25, and -50 in secondary units. After loading a new design (jaeger configuration load XXX) you can use hal goto-field to do the slew, FPS reconfiguration, FVC loop etc. Note that it takes a Hartmann sequence, arcs and flats. If you don't want those you can specify the stages to run with the --stages flag. If the sequence fails please note when and how and just go to field manually. ---- Observing Summary ---- It was mostly clear untl the last three hours. We observed configuration 35881, 35903, 35929, 35371, and 35373, obtained completed dither sets for 35881, and 335929. We took fvc images for the base configuration and all dithered configurations. We also took fvc images after "jaeger configuration reverse". These images show that likely "reverse: command does not send robot back to their original positions. Notes: 1. The new version STUI 1.7.14 doesn't have BOSS mech status (the version 1.7.13 has correct information). 04:58:02 OBSERVER.kpan 10 boss i shutterStatus=0x02 04:58:02 InvalidKeywordData=boss.shutterStatus, ['0x02'] 04:58:02 OBSERVER.kpan 10 boss i screenStatus=0x0a 04:58:02 InvalidKeywordData=boss.screenStatus, ['0x0a'] 04:58:02 OBSERVER.kpan 10 boss i slitIDs=0 04:58:02 InvalidKeywordData=boss.slitIDs, ['0'] 04:58:02 OBSERVER.kpan 10 boss i specMechVersion=3.0.4 04:58:02 InvalidKeywordData=boss.specMechVersion, ['3.0.4'] 04:58:02 OBSERVER.kpan 10 boss i specMechProtocol=3 04:58:02 InvalidKeywordData=boss.specMechProtocol, ['3'] 2. Jaeger lost connection to IEB, jager ieb enable to get the connection back. 3. It is likely, "jaeger configuration reverse" doesn't send robots back to their original positions. FVC image #25 is for a base configuration, #27, #29, #31 are images after "jaeger configuration reverse". Robots in these images are not at the same positions. 4. the fitting RMS may not very reliable. fvc image #39 has a fitting RMS of 71 um (one scramble positions). After taking one science exposure, we took another fvc image, #40, on the configuration, the fitting rms becomes 5.22 um. However, a visual check indicates robot positions rotates (not much drift at the center, but relatively big at the edges). 5. We attempted to observe configuration 35973, the guider could not find a resolution even there are enough stars in each GFAs. ---- Observing Log ---- Afternoon: ========== --Test Actors, 22:36:30 22:38:31 - apogee short darks 22:50:09 - apogee evening cals started 22:56:27 boss exposure 0.0, file=335683 23:00:58 boss exposure 20.0, file=335684 -- wrong, forgot turn on ff lamps 23:06:28 boss exposure 20.0, file=335685 23:16:19 Hartmann collimate output on cart #19 sp1: offset: r= 0 (In Focus); b= -4.2 (Out of focus) sp1: pred. move: spAverageMove= 674 sp1: pred. resid: r= -674, b= -2.1, txt= OK, spTemp = 6.8 23:24:18 boss exposure 4.0, file=335688 -- arc, ok 23:35Z start ventilation 23:42Z on the telescope all checking and ok 23:57:36 CmdStarted: OBSERVER.viktorm 60 jaeger power on 23:57:36 OBSERVER.viktorm 60 jaeger d power_sync=F 23:57:55 OBSERVER.viktorm 60 jaeger i text="Waiting 15 seconds and reloading positioners." 23:58:15 OBSERVER.viktorm 60 jaeger : text="Power on sequence complete." 23:58:15 CmdDone: OBSERVER.viktorm 60 jaeger power on 23:58:59 CmdStarted: OBSERVER.viktorm 61 fliswarm reconnect 00:13:46 .hub 0 cmds d CmdIn="OBSERVER.viktorm","fliswarm","talk -c gfa temperature -20" 00:14:56 .hub 0 cmds d CmdIn="OBSERVER.viktorm","jaeger","unwind" 00:05Z: Open 00:20Z: setup zoom connection on SDSS5-obs2. 01:25Z: started a focus sweep to focus the telescope. 01:35Z: The best focus is found at 450 since it typically dropped to lower position, we set the M2 to 400 um, and plan to run another focus sweep after the first field. 01:40Z: jaeger configuration load 35881 1:58:39 CmdDone: OBSERVER.viktorm 94 hal goto-field -s slew,reconfigure,fvc 02:20:14 OBSERVER.viktorm.jaeger 129 jaeger i text="[FVC]: RMS full fit 94.430 um." 02:20:58 OBSERVER.viktorm.jaeger 129 jaeger i text="[FVC]: RMS full fit 9.600 um." 02:21:42 OBSERVER.viktorm.jaeger 129 jaeger i text="[FVC]: RMS full fit 5.220 um." 02:22:24 OBSERVER.viktorm.jaeger 129 jaeger i text="[FVC]: RMS full fit 4.460 um." the last fvc image: fimg-fvc1n-0004.fits cherno show 02:35:09 OBSERVER.kpan 5 cherno > 02:35:09 OBSERVER.kpan 5 cherno i text="status: " 02:35:09 OBSERVER.kpan 5 cherno i text="offset: (0.0, 0.0, -432.0)" open the cold shutter and started a 30-read apogee exposure. 02:42:04 CmdStarted: OBSERVER.viktorm 104 apogee expose nreads=30 object=Object file: apRaw-40100010 Then we loop this 12 times. jaeger configuration dither 0.1 apogee expose nreads=30 object=Object jaeger configuration reverse tui wait 5 The corresponding files are: apRaw-40100011 - 22 at 3:22, guider went wrong, 3:23:37 OBSERVER.viktorm 100 cherno i astrometry_fit=85,3,-999.0,-999.0,2.17,0.21,-0.007,-0.105,-0.107,-4.5,1.000049 03:24:29 OBSERVER.viktorm 100 cherno i astrometry_fit=86,1,-999.0,-999.0,2.38,0.17,0.372,7408.36,1992.659,539506.0,0.999777 03:25:09 OBSERVER.viktorm 100 cherno i astrometry_fit=87,1,-999.0,-999.0,2.39,0.16,0.763,-28.355,12.311,-110.9,1.005865 03:25:54 OBSERVER.viktorm 100 cherno i astrometry_fit=88,1,-999.0,-999.0,2.38,0.16,0.45,-3.869,-11.716,-339.7,0.999759 03:26:40 OBSERVER.viktorm 100 cherno i astrometry_fit=89,1,-999.0,-999.0,2.35,0.17,1.023,-17.17,-17.085,-439.3,1.001387 due to the guiding issue, the apogee exposures 40100016 - 22 might be bad. 4:09:21 CmdDone: OBSERVER.viktorm 116 cherno stop Hal calibrations apogee-dome-flat: apRaw-40100023, the dome flat is good. 04:15Z: we decided to refocus the telescope. The best focus is at 190. 05:32Z: jaeger unwind 05:34Z: jaeger configuration load 35903 05:36Z: hal goto-field -s slew,reconfigure,fvc 04:38:34 OBSERVER.viktorm 144 hal e error="Command jaeger configuration execute failed." 4:38:34 CmdDone: OBSERVER.viktorm 144 hal goto-field -s slew,reconfigure,fvc 04:41:05 CmdStarted: OBSERVER.viktorm 145 jaeger unwind 04:41:05 OBSERVER.viktorm 145 jaeger > 04:41:05 OBSERVER.viktorm 145 jaeger f error="The FPS is locked." 04:41:05 CmdDone: OBSERVER.viktorm 145 jaeger unwind 04:41:25 OBSERVER.viktorm 147 jaeger f error="Command 'unwind' failed because of an uncaught error 'RuntimeError: Grid is Kaiju-collided, cannot generate paths'. See traceback in the log for more information." 04:41:25 CmdDone: OBSERVER.viktorm 147 jaeger unwind 04:43:54 CmdStarted: OBSERVER.viktorm 150 jaeger explode 10 4:47:05 CmdStarted: OBSERVER.viktorm 152 hal goto-field -s slew,reconfigure,fvc this one completed normally. 4:48:16 OBSERVER.viktorm.jaeger 160 jaeger i text="[FVC]: RMS full fit 92.010 um." 04:49:00 OBSERVER.viktorm.jaeger 160 jaeger i text="[FVC]: RMS full fit 14.100 um." 04:49:43 OBSERVER.viktorm.jaeger 160 jaeger i text="[FVC]: RMS full fit 9.150 um." 04:50:25 OBSERVER.viktorm.jaeger 160 jaeger i text="[FVC]: RMS full fit 8.110 um." 04:51:07 OBSERVER.viktorm.jaeger 160 jaeger i text="[FVC]: RMS full fit 8.080 um." This last fvc image on this loop is fimg-fvc1n-0009.fits 4:55:05 CmdDone: OBSERVER.viktorm 153 cherno acquire -c -t 30 --full the guider resolution has very big offsets which is unlikely that these offsets are real. 03:57:13 OBSERVER.viktorm 100 cherno i astrometry_fit=130,1,-999.0,-999.0,2.58,0.16,0.02,7408.846,2041.968,538549.5,0.998909 05:18:06 OBSERVER.kpan 14 cherno f error="Command 'acquire -c -t 30 --full' failed because of an uncaught error 'OSError: File /data/gcam/59572/proc-gimg-gfa3n-0166.fits already exists. If you mean to replace it then use the argument \"overwrite=True\".'. See traceback in the log for more information." 05:18:06 CmdDone: OBSERVER.kpan 14 cherno acquire -c -t 30 --full We keep get this error. We decided to restart from load configuration. jaeger unwind jaeger configuration load 35903 05:28:39 OBSERVER.kpan 23 hal e error="TCC slew command ended with some bad bits set: 0x800,0x800,0x800" 05:28:39 OBSERVER.kpan 23 hal e error="Failed to complete slew: see TCC messages for details." tcc axis init hal goto-field -s slew,reconfigure,fvc 05:29:41 OBSERVER.kpan.jaeger 191 jaeger f error="Command 'configuration explode 5' failed." 05:29:41 CmdDone: OBSERVER.kpan.jaeger 191 jaeger configuration explode 5 jaeger explode 10 jaeger unwind hal goto-field -s slew,reconfigure,fvc 05:35:48 OBSERVER.kpan.jaeger 202 jaeger i text="[FVC]: RMS full fit 79.920 um." 05:36:31 OBSERVER.kpan.jaeger 202 jaeger i text="[FVC]: RMS full fit 9.560 um." 05:37:12 OBSERVER.kpan.jaeger 202 jaeger i text="[FVC]: RMS full fit 6.770 um." 05:37:54 OBSERVER.kpan.jaeger 202 jaeger i text="[FVC]: RMS full fit 6.510 um." the last fvc image: fimg-fvc1n-0013.fits 5:38:53 OBSERVER.kpan 29 cherno f error="Command 'acquire -c -t 15 --full' failed because of an uncaught error 'OSError: File /data/gcam/59572/proc-gimg-gfa3n-0167.fits already exists. If you mean to replace it then use the argument \"overwrite=True\".'. See traceback in the log for more information." 05:38:53 CmdDone: OBSERVER.kpan 29 cherno acquire -c -t 15 --full 05:53:25 OBSERVER.kpan 41 cherno f error="Command 'acquire -c -t 15' failed because of an uncaught error 'OSError: File /data/gcam/59572/proc-gimg-gfa3n-0171.fits already exists. If you mean to replace it then use the argument \"overwrite=True\".'. See traceback in the log for more information." 05:53:25 CmdDone: OBSERVER.kpan 41 cherno acquire -c -t 15 restart fliswarm fixed the issue. But it's too late to compltete dither sequence on this field. Let's move to the next one. jaeger unwind jaeger configuration load 35929 06:39:22 CmdStarted: OBSERVER.viktorm 195 hal goto-field -s slew,reconfigure,fvc 06:40:53 OBSERVER.viktorm.jaeger 214 jaeger i text="[FVC]: RMS full fit 87.440 um." 06:41:37 OBSERVER.viktorm.jaeger 214 jaeger i text="[FVC]: RMS full fit 21.040 um." 06:42:22 OBSERVER.viktorm.jaeger 214 jaeger i text="[FVC]: RMS full fit 6.400 um." 06:43:04 OBSERVER.viktorm.jaeger 214 jaeger i text="[FVC]: RMS full fit 10.530 um." The last FVC image is fimg-fvc1n-0017.fits. The very last one has a bigger RMS than the previous one. Base configuration: 623, apogee exposure: apRaw-40100024 Looks like that we didn't offset guiding on the rotator, so redo this base again with the offset guiding. 07:07:08 CmdStarted: OBSERVER.viktorm 202 jaeger unwind 07:08:37 CmdStarted: OBSERVER.viktorm 203 jaeger configuration load 35929 07:10:08 CmdStarted: OBSERVER.viktorm 204 hal goto-field -s slew,reconfigure,fvc 7:11:19 OBSERVER.viktorm.jaeger 226 jaeger i text="[FVC]: RMS full fit 82.970 um." 07:12:03 OBSERVER.viktorm.jaeger 226 jaeger i text="[FVC]: RMS full fit 25.270 um." 07:12:48 OBSERVER.viktorm.jaeger 226 jaeger i text="[FVC]: RMS full fit 7.880 um." 07:13:30 OBSERVER.viktorm.jaeger 226 jaeger i text="[FVC]: RMS full fit 4.260 um." the last FVC image is fimg-fvc1n-0021.fits. Base configuration: 625, apogee exposure: apRaw-40100025, fimg-fvc1n-0021.fits, [FVC]: RMS full fit 4.260 um. jaeger configuration dither 0.1 cherno stop tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0022.fits [FVC]: RMS full fit 73.470 um. tcc track cherno acquire -c -t 15 configuration: 625, apogee exposure: apRaw-40100026 jaeger configuration reverse cherno stop tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0023.fits i text="[FVC]: RMS full fit 48.200 um." jaeger configuration dither 0.1 jaeger fvc loop --no-apply fimg-fvc1n-0024.fits i text="[FVC]: RMS full fit 74.840 um." configuration: 627, apogee exposure: apRaw-40100027 Looks like "jaeger configuration reverse doesn't get robots back to the base configuration. jaeger configuration reverse cherno stop tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0025.fits i text="[FVC]: RMS full fit 50.210 um." jaeger configuration dither 0.1 "Creating dithered configuration from 625." 08:19:03 OBSERVER.viktorm 231 jaeger d configuration_loaded=628 jaeger fvc loop --no-apply fimg-fvc1n-0026.fits i text="[FVC]: RMS full fit 73.510 um." configuration: 628, apogee exposure: apRaw-40100028 8:34:13 jaeger.jaeger 106 jaeger f error="ieb not connected." 08:34:13 CmdDone: jaeger.jaeger 106 jaeger ieb fbi led2 0 08:34:17 .jaeger 0 jaeger e text="Failed setting chiller temperature." 08:35:28 CmdStarted: OBSERVER.kpan 88 jaeger ieb enable fixed the issue jaeger configuration reverse cherno stop tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0027.fits i text="[FVC]: RMS full fit 38.530 um." jaeger configuration dither 0.1 "Creating dithered configuration from 625." jaeger d configuration_loaded=629 jaeger fvc loop --no-apply fimg-fvc1n-0028.fits i text="[FVC]: RMS full fit 73.230 um." configuration: 629, apogee exposure: apRaw-40100029 jaeger configuration reverse cherno stop tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0029.fits i text="[FVC]: RMS full fit 32.060 um." jaeger configuration dither 0.1 "Creating dithered configuration from 625." jaeger d configuration_loaded=629 jaeger fvc loop --no-apply fimg-fvc1n-0030.fits i text="[FVC]: RMS full fit 73.880 um." configuration: 630, apogee exposure: apRaw-40100030'' jaeger configuration reverse cherno stop tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0031.fits i text="[FVC]: RMS full fit 28.450 um." jaeger configuration dither 0.1 "Creating dithered configuration from 625." jaeger d configuration_loaded=629 jaeger fvc loop --no-apply fimg-fvc1n-0032.fits i text="[FVC]: RMS full fit 73.020 um." configuration: 631, apogee exposure: apRaw-40100031'' jaeger configuration reverse jaeger configuration dither 0.1 cherno stop and tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0033.fits i text="[FVC]: RMS full fit 72.900 um." configuration: 632, apogee exposure: apRaw-40100032'' jaeger configuration reverse jaeger configuration dither 0.1 cherno stop and tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0034.fits i text="[FVC]: RMS full fit 72.350 um." configuration: 633, apogee exposure: apRaw-40100033'' jaeger configuration reverse jaeger configuration dither 0.1 cherno stop and tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0035.fits i text="[FVC]: RMS full fit 72.530 um." configuration: 634, apogee exposure: apRaw-40100034'' jaeger configuration reverse jaeger configuration dither 0.1 cherno stop and tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0036.fits i text="[FVC]: RMS full fit 72.480 um." configuration: 635, apogee exposure: apRaw-40100035'' jaeger configuration reverse jaeger configuration dither 0.1 cherno stop and tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0037.fits i text="[FVC]: RMS full fit 71.540 um." configuration: 636, apogee exposure: apRaw-40100036'' jaeger configuration reverse jaeger configuration dither 0.1 cherno stop and tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0038.fits i text="[FVC]: RMS full fit 71.440 um." configuration: 637, apogee exposure: apRaw-40100037 jaeger configuration reverse jaeger configuration dither 0.1 cherno stop and tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0039.fits i text="[FVC]: RMS full fit 71.070 um." configuration: 638, apogee exposure: apRaw-40100038 to check whether robots moved during the exposure, we take one fvc image after the exposure. cherno stop and tcc axis stop jaeger fvc loop --no-apply fimg-fvc1n-0040.fits i text="[FVC]: RMS full fit 5.220 um." The fit RMS changed from 71.07 to 5.22 um,a visual check indicates robot positions rotates (not much drift at the center, but relatively big at the edges). 10:40Z: decided to do another focus sweep. The best focus is 300 um. jaeger configuration load 35971 hal goto-field -s slew, reconfigure, fvc 11:05:38 OBSERVER.viktorm.jaeger 243 jaeger i text="[FVC]: RMS full fit 78.710 um." 11:06:23 OBSERVER.viktorm.jaeger 243 jaeger i text="[FVC]: RMS full fit 21.360 um." 11:07:05 OBSERVER.viktorm.jaeger 243 jaeger i text="[FVC]: RMS full fit 16.630 um." 11:07:47 OBSERVER.viktorm.jaeger 243 jaeger i text="[FVC]: RMS full fit 15.930 um." only one GFA has solution although all GFA have at least 5 stars. Even although the guider push rotator offset to 20 arcminutes. unwind and re-goto-field, try again. hal goto-field -s slew, reconfigure, fvc 1:54:48 OBSERVER.kpan.jaeger 269 jaeger i text="[FVC]: RMS full fit 78.520 um." 11:55:31 OBSERVER.kpan.jaeger 269 jaeger i text="[FVC]: RMS full fit 29.170 um." 11:56:14 OBSERVER.kpan.jaeger 269 jaeger i text="[FVC]: RMS full fit 23.540 um." 11:56:55 OBSERVER.kpan.jaeger 269 jaeger i text="[FVC]: RMS full fit 23.510 um." Still no solution. GFA images from 550 -575. try another field. unwind jaeger configuration load 35973 hal goto-field -s slew, reconfigure, fvc 2:10:08 OBSERVER.kpan.jaeger 281 jaeger i text="[FVC]: RMS full fit 79.740 um." 12:10:52 OBSERVER.kpan.jaeger 281 jaeger i text="[FVC]: RMS full fit 17.550 um." 12:11:34 OBSERVER.kpan.jaeger 281 jaeger i text="[FVC]: RMS full fit 9.910 um." 12:12:18 OBSERVER.kpan.jaeger 281 jaeger i text="[FVC]: RMS full fit 11.820 um." 12:13: start guiding 2:13:34 CmdDone: cherno.cherno 1151 fliswarm talk -n gfa2,gfa3,gfa4,gfa5,gfa6 -- expose -n 587 30.0 12:13:37 OBSERVER.kpan 173 cherno i camera_solution=gfa3,587,F,-999.0,-999.0,-999.0,-999.0,-999.0 12:13:38 OBSERVER.kpan 173 cherno i camera_solution=gfa6,587,F,-999.0,-999.0,-999.0,-999.0,-999.0 12:13:38 OBSERVER.kpan 173 cherno i camera_solution=gfa5,587,F,-999.0,-999.0,-999.0,-999.0,-999.0 12:13:38 OBSERVER.kpan 173 cherno i camera_solution=gfa4,587,F,-999.0,-999.0,-999.0,-999.0,-999.0 12:13:39 OBSERVER.kpan 173 cherno i camera_solution=gfa2,587,F,-999.0,-999.0,-999.0,-999.0,-999.0 On all these GFA images, there are many nice stars. 12:20Z: called it the night. 12:25Z: started apogee morning cals. ---- Mirror Numbers ---- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A: 0.0040 0.0040 Axial B: 0.0030 0.0030 Axial C: -0.1170 -0.1150 Trans D: -0.0341 -0.0338 Lateral E: 0.3315 0.3315 Lateral F: 0.5345 0.5350 GALILS Commanded: 12500 -1600 5300 47050 -8800 -8400 Actual: 12500 -1600 5300 47050 -8800 -8400 SETMIR VALUES PrimDesOrient: 0.0 -59.5 -9.15 -512.0 1906.3 PrimOrient: 1.07 -59.51 -9.21 -512.13 1906.31 SECONDARY: ---------- Focus: 0.0000 Air temp: 8.11 Altitude: 30.0 MIGS TONIGHT NOMINAL Axial A: -9.6550 -9.6570 Axial B: -9.6660 -9.6710 Axial C: -9.6970 -9.6970 Trans D: 0.1010 0.1140 GALILS Commanded: 4885500 4880800 4902500 0 -3400 Actual: 4859161 4859161 4859217 0 -3400 SETMIR VALUES SecDesOrient: 3857.0 0.0 0.0 0.0 42.22 SecOrient: 3856.97 -0.02 -0.01 -0.01 41.66 ---- Telescope Status ---- 23:35Z Started ventilation 00:05 encl25m : open 12:20Z encl25m : closed No interlocks bypassed Status at:12:50Z Telescope stowed at: 121.0, 30.0, 0.0 mount Instrument mounted: cartridge = FPS Counterweights at: 685, 685, 705, 705 LN2 autofill systems: Connected and turned on 180L LN2 dewar scales: SP1 162 lbs, 24 psi ---- Software Used ---- Get Versions, 12/23/21, 22:36:48 -- STUI software: STUI : 1.7.13 alerts : 2.2.0 apo : 3.0.1 boss : 6.0.1-alpha.0 -boss.specMec : 3.0.4 guider : 4.0.0 ecamera : FAILED fliswarm : FAILED hartmann : 2.0.1-alpha.0 hub : 5.0.0a0 mcp : 2.1 -mcp.plc : 34 -mcp.azFiduci : v1_148 -mcp.altFiduc : v1_148 -mcp.rotFiduc : v1_148 sop : FAILED tcc : 1.4.0 apogee : not availble apogeecal : not availble apogeeql : v1_7_0dev STUIAdditions : 3.1.9 --------------Other Versions-------------- sdss-obstools : 3.7.6 TPM : 1.2-31-gd7eb MCP : 2.1 idlspec2d : v6_0_4 ---- APOGEE Data Summary ---- APOGEE data list, mjd=59572, all raw_data: /data/apogee/utr_cdr/59572/apRaw-*.fits archive: /data/apogee/archive/59572/apR-[a,b,c]-*.apz quickred: /data/apogee/quickred/59572/apq-*.fits ------------------------------------------------------------------------------ mjd i UT File/Exp Imtype Nread A/B Dth Ct-Plate Arch Offset %Flux Comm ------------------------------------------------------------------------------ 59572 1 22:38 40100001 Dark 3 A 13.0 -------- a-b-c - - 59572 2 23:00 40100002 Dark 60 A 13.0 -------- a-b-c - - 59572 3 23:02 40100003 QuarFlat 10 A 13.0 FPS- 0 a-b-c - 100 59572 4 23:04 40100004 Arc-Thar 12 A 13.0 FPS- 0 a-b-c -0.11 - 59572 5 23:11 40100005 Arc-Une 40 A 13.0 FPS- 0 a-b-c - - 59572 6 23:14 40100006 Arc-Thar 12 B 13.5 FPS- 0 a-b-c 0.51 - 59572 7 23:21 40100007 Arc-Une 40 B 13.5 FPS- 0 a-b-c - - 59572 8 23:32 40100008 Dark 60 A 13.0 -------- a-b-c - - 59572 9 23:55 40100009 Arc---- 30 A 13.0 FPS- 0 a-b-c - - FPI 59572 10 02:47 40100010 Object 30 A 13.0 FPS- 0 a-b-c -0.10 - 59572 11 03:00 40100011 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 12 03:06 40100012 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 13 03:12 40100013 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 14 03:18 40100014 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 15 03:24 40100015 Object 30 A 13.0 FPS- 0 a-b-c -0.10 - 59572 16 03:30 40100016 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 17 03:36 40100017 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 18 03:42 40100018 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 19 03:48 40100019 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 20 03:54 40100020 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 21 04:00 40100021 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 22 04:06 40100022 Object 30 A 13.0 FPS- 0 a-b-c -0.10 - 59572 23 04:11 40100023 DomeFlat 5 A 13.0 FPS- 0 a-b-c - 131 59572 24 06:54 40100024 Object 30 A 13.0 FPS- 0 a-b-c err - 59572 25 07:23 40100025 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 26 07:32 40100026 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 27 07:51 40100027 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 28 08:29 40100028 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 29 08:42 40100029 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 30 08:53 40100030 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 31 09:05 40100031 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 32 09:19 40100032 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 33 09:31 40100033 Object 30 A 13.0 FPS- 0 a-b-c -0.07 - 59572 34 09:42 40100034 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 35 09:56 40100035 Object 30 A 13.0 FPS- 0 a-b-c -0.07 - 59572 36 10:07 40100036 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 37 10:18 40100037 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 38 10:28 40100038 Object 30 A 13.0 FPS- 0 a-b-c -0.08 - 59572 39 10:32 40100039 DomeFlat 5 A 13.0 FPS- 0 a-b-c - 131 59572 40 11:11 40100040 Object 30 A 13.0 FPS- 0 a-b-c -0.09 - 59572 41 12:40 40100041 Dark 60 A 13.0 -------- x-x-x - - ------------------------------------------------------------------------------