Subject: 2.5m obslog 20201017 (SJD 59140) From: kpan@apo.nmsu.edu Date: Sun, 18 Oct 2020 11:59:24 +0000 (UTC) APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Saturday October 17, 2020 (SJD 59140) ---- Observing Team ---- Kaike Pan Karen Kinemuchi ---- Observing Plan ---- Focus sweep test ---- Observing Summary ---- Jose fixed the invalid keyword issue in bossICC. We took some guider images by connecting the camera to the communication rack in the lower enclosure. We think that the issue was the converter or before it (see log). An fiber connector there is somewhat losing. We tried to run Renbin's codes at APO. We had issue in IDL libraries or environment. Hector has completed the data reduction for r1 shim. There is no pressure on completing the analysis, but we will figure it out later so that observers can do it in the further. A very preliminary result shows that r1 may not need a wedge shim, so we take a full set of focus sweep data for hartmann coefficients. Notes: ===== 1. We swap the 180L dewar since it is not on a scale, we are not sure if it has enough LN2 for today. 2.Guider GUI displays images fine on obs1 computer, but images doesn't show on the GUI on obs2 station, and the choose button will not bring up previous guider images (Obs1 can). 3. The guider camera has a connecting issue (see log). ---- Observing Log ---- Upgraded obs1, obs2, and podium laptop to STUI v1.7.10 Disk check: df -kh Filesystem Size Used Avail Use% Mounted on /dev/vda2 7.7G 6.6G 751M 90% / tmpfs 3.4G 0 3.4G 0% /dev/shm /dev/vda1 194M 133M 52M 73% /boot /dev/vdb 19G 8.8G 9.1G 49% /exports/hub-local /dev/vdd 688G 576G 112G 84% /home /dev/vdc1 11T 9.7T 1.1T 91% /data 01:13Z Dust counts are high. 01:32Z Trying to figure out the gcamera communications. Yesterday, pinging the gcamera returns unreachable. Today,We tried to isolate the issue to three points: converter or before it, the ethernet cable, and the camera. We connected a laptop to a port on the convert to see if we can connect online (I could not). Then we used a long cable to connect the guider camera with a port on the communication rack, but we still could not ping the camera. We noticed the cable is a used one, we found another one and tried again. It worked. Then we setup the guider, took dark, and flats. For a check, we connect the camera to the converter with the cable that we took data with, we could not ping the guider camera. 02:53Z Running Renbin's IDL scripts to figure out the shim for R1. But we had issues with setting environment. 06:30Z; adjust the blue focus ring, and setup for another set of focus sweep data. sop collimateBoss: pred. resid: r= -196, b= -0.6, fr: 318391-392. sop doBossCalibs nflat=1 narc=1 fr: 318393-394 boss moveColl spec=sp1 a=10500 b=10500 c=10500 sop hartmann fr: 318397-398 mcp ff.on boss exposure flat itime=25 fr: 318399- mcp ff.off mcp hgcd.on mcp ne.on boss exposure arc itime=4 fr: 318400 mcp hgcd.off mcp ne.off Loop this set of command 14 times. boss moveColl spec=sp1 a=-1500 b=-1500 c=-1500 sop hartmann mcp ff.on boss exposure flat itime=25 mcp ff.off mcp hgcd.on mcp ne.on boss exposure arc itime=4 mcp hgcd.off mcp ne.off Frames: 318401-404, 405-08, 409-412, 413-416, 417-420, 421-424, 435-428, 429-432, 433-436, 437-440, 441-444, 445-448, 449-452, 453-456. boss moveColl spec=sp1 a=10500 b=10500 c=10500 fr: 457-460. sop hartmann mcp ff.on boss exposure flat itime=25 mcp ff.off mcp hgcd.on mcp ne.on boss exposure arc itime=4 mcp hgcd.off mcp ne.off Sop CollimateBoss: 318461-462. sop hartmann 318463-466 mcp ff.on boss exposure flat itime=25 mcp ff.off mcp hgcd.on mcp ne.on boss exposure arc itime=4 mcp hgcd.off mcp ne.off Move Blue focus ring by +15 degrees.Take a subset of data with blue ring at +15 degrees from their best foci with the script above. Frames: 467-4670. Move Blue focus rings by -30 degrees.Take a subset of data with blue ring at -15 (+15-30) degrees from their best foci with the script above. Frame: 471-474. Move Blue focus rings by +15 degrees.Take a subset of data with blue ring at 0 deg (+15-30+15) from their best foci with the script above. Frames: 475-478. SOP collimateBOSS; frames: 318479-480. 12:10Z: started morning cals. ---- Telescope Status ---- Never opened No interlocks bypassed ---- Software Used ---- Get Versions, 10/18/20, 01:10:47 -- STUI software: STUI : 1.7.10 alerts : 2.0.1 apo : trunk+svn158476M boss : 5.0.0 -boss.specMec : 3.0.4 gcamera : v2_2 guider : 3.8.1 hartmann : 1.7.2dev hub : v4.2.4 mcp : 1.12-10-g3766 -mcp.plc : 34 -mcp.azFiduci : v1_142 -mcp.altFiduc : v1_142 -mcp.rotFiduc : v1_142 platedb : 2.8.0 sop : 4.0.0 tcc : 1.4.0 apogee : not availble apogeecal : not availble apogeeql : v1_6_1 APO-local : not availble -- done -- Home Disk Hogs (GB): manga 104.743 eboss 87.9793 sdss3 27.1813 apogee 18.7889 observer 17.724 logging 13.765 Filesystem Size Used Avail Use% Mounted on /dev/vdd 688G 576G 112G 84% /home /dev/vdc1 11T 9.7T 1.1T 91% /data Setting up: idlspec2d Flavor: Linux64 Version: v5_7_12 Setting up: |elodie Flavor: Linux64 Version: v1_3 Setting up: |spinspect Flavor: Linux64 Version: trunk Setting up: |specflat Flavor: Linux64 Version: v1_20 Setting up: |speclog Flavor: Linux64 Version: trunk Setting up: |platelist Flavor: Linux64 Version: trunk Setting up: |sdss_python_module Flavor: Linux64 Version: v1_6_7 Setting up: |sqlalchemy Flavor: Linux64 Version: 0.9.7 Setting up: |psycopg2 Flavor: Linux64 Version: 2.5.3 Setting up: |idlutils Flavor: Linux64 Version: v5_5_16 Setting up: |idl Flavor: Linux64 Version: 7.1 Setting up: |dust Flavor: Linux64 Version: v0_1 Setting up: |photolog Flavor: Linux64 Version: trunk Setting up: actorcore Flavor: Linux64 Version: v4_1_8 Setting up: |opscore Flavor: Linux64 Version: v2_5 Setting up: |external Flavor: Linux64 Version: v1_2_0 Setting up: |actorkeys Flavor: Linux64 Version: trunk Setting up: |plc Flavor: Linux64 Version: v30_2 Setting up: |sdsstools Flavor: Linux64 Version: v4_33 Setting up: |sdss3tools Flavor: Linux64 Version: v1_7_13 Setting up: |RO Flavor: Linux64 Version: 3.6.9 -- Other versions ---- idlspec2d : v5_7_12 plate-mapper3 : NOCVS:v7_0_7 petunia : git autoscheduler : 1.5.4 sdss_python_module: trunk mangadrp : trunk exported ---- APOGEE Data Summary ---- list_ap -m 59139 -morning APOGEE data list, mjd=59139, morning raw_data: /data/apogee/utr_cdr/59139/apRaw-*.fits archive: /data/apogee/archive/59139/apR-[a,b,c]-*.apz quickred: /data/apogee/quickred/59139/ap2D-a-*.fits.fz -------------------------------------------------------------------------------- mjd i UT File/Exp Imtype Nread A/B Dth Ct-Plate Arch Offset %Flux Comm -------------------------------------------------------------------------------- 59139 1 07:44 35770009 Dark 60 A 13.0 1-15002 a-b-c - - 59139 2 07:54 35770010 Dark 60 A 13.0 1-15002 a-b-c - - 59139 3 08:05 35770011 Dark 60 A 13.0 1-15002 a-b-c - - 59139 4 08:16 35770012 QuarFlat 10 A 13.0 1-15002 a-b-c - 61 59139 5 08:18 35770013 QuarFlat 10 A 13.0 1-15002 a-b-c - 60 59139 6 08:19 35770014 QuarFlat 10 A 13.0 1-15002 a-b-c - 60 59139 7 08:21 35770015 Arc-Thar 12 A 13.0 1-15002 a-b-c -5.57 - 59139 8 08:24 35770016 Arc-Une 40 A 13.0 1-15002 a-b-c - - 59139 9 08:31 35770017 Arc-Thar 12 B 13.5 1-15002 a-b-c -5.05 - 59139 10 08:33 35770018 Arc-Une 40 B 13.5 1-15002 a-b-c - - 59139 11 08:40 35770019 Dark 30 A 13.0 1-15002 a-b-c - - 59139 12 08:46 35770020 InteFlat 30 A 13.0 1-15002 a-b-c - 0 59139 13 08:51 35770021 InteFlat 30 A 13.0 1-15002 a-b-c - 0 59139 14 08:56 35770022 InteFlat 30 A 13.0 1-15002 a-b-c - 0 59139 15 09:02 35770023 Dark 30 A 13.0 1-15002 a-b-c - - --------------------------------------------------------------------------------