Date: Sun, 24 Aug 2014 11:55:53 -0700 Subject: Re: [sdss3-25mlog 1857] 2.5m obslog 20140823 (MJD 56893) From: Constance Rockosi --047d7bdc9f02a1243f0501649e79 Content-Type: text/plain; charset=UTF-8 Thanks to everyone who pushed so hard to get us back on the air for a productive night. I am sure that only the tip if the iceberg of everything that got done/fixed/patched/diagnosed/hexed yesterday made it onto the mailing lists. --Connie On Sun, Aug 24, 2014 at 3:52 AM, wrote: > > APACHE POINT OBSERVATORY SDSS 2.5M > > OBSERVING LOG > Saturday August 23, 2014 > > (MJD 56893) > > ---- Observing Team ---- > > Patrick Gaulme > Dan Oravetz > > Support: > Kaike Pan > Paul Harding > Brian Cherinka > John Parejko > Kyle Dawson > Fritz Stauffer > Jon Brinkmann > > ---- Observing Plan ---- > > Obtain and implement a pointing model > > ---- Observing Summary ---- > > We completed and implemented a new pointing model using the 150-point > grid. We > noticed that the flat field screens closed at more than one target below 20 > degrees altitude. This happened three times. > > We took some MaNGA and eBOSS calibrations to test DOS and SOS. We also took > sparse-plugged images for MaNGA. Details in Log. > > We focused the guider camera and mounted it on the telescope. See Log for > details. > > ---- Observing Log ---- > > ****************************** > Sparse-plugged MaNGA exposures > ****************************** > ''' > Hello, here is the log for sparse plugging test to determine good WMID > rang. > > It was not very smooth process this afternoon. John requested me to paul > once, > reading out hung twice, moving collimator timed out once. Anyway, we got > the data. > > -kaike > ''' > > 0. Mount a BOSS (or MaNGA) sparse plugging plate. > > 1. Focus cameras. Full hartmann works on sparse plugging plate. So use > hartmann > to focus > all cameras. > Recording collimator piston positions on both SP1 and SP2. FM: > 180626-627 > > 2. Take a normal flat, a 30 sec arc, and a 60 sec arc. The flat can be > taken > using sop. > But It's better to use "boss > exposure" to take arcs ("sop docalibs needs to wait three minutes for arc > lamps > warming > up). Sorry this was skipped. > > sop doCalibs nflat=1 flatTime=30 FM: 180628 > mcp ne.on > mcp hgcd.on > boss exposure arc iTime=30 FM 180629-30 > boss exposure arc iTime=60 > > 3. Use ds9 to check the flat, arc exposures to make sure they are really > flat > and arcs > (not darks). > > 4. Move collimator so that blue WMids will move 50 angstroms, then take a > 30 sec > arc and > a 60 sec arc. > > boss moveColl spec=sp1 a=1550 b=-1550 c=0 > boss moveColl spec=sp2 a=1550 b=-1550 c=0 > boss exposure arc iTime=30 > boss exposure arc iTime=60 FM 631-632 > > 5. Move collimator so that blue WMids will move -5 angstroms, then take a > 30 sec > arc and > a 60 sec arc. > > boss moveColl spec=sp1 a=-155 b=155 c=0 > boss moveColl spec=sp2 a=-155 b=155 c=0 > > boss exposure arc iTime=30 > boss exposure arc iTime=60 FM: 633-34 > > 6. Repeat step 5 nineteen (19) more times. > 635-36, 637-38, 639-40, 641-42, 643-44, 645-46 John asked to paused here > so > that he > can restarted tron. > Seems that restarting tron use lot of memory. Paul's session hung so he > quit > from STUI. > After resume > the process, we had file-written issue, and one minute later my STUI quit > unexpected. > exposure 180647 was hung due to writing file problem? > 180648-49 bias and dark. 180650-53 are darks too. > > Reset up and resume the process,. Collimator moving timed out. So I > decided to move > collimator > back to the position where 180645 and 180646 were taken, and retake a set > there. So > 180645-646 and > 180654-55 should be at the same collimator position. Then repeat step 5 > thirteen (13 > times). > 180654-55, 56-57, 58-59, 60-61, 62-63, 64-65, 66-67, 68-69, 70-71, 72-73, > 74-75, > 76-77, > 78-79, > 80-81. > > 7. Move collimators back to their original positions: > mcp ne.off > mcp hgcd.off > boss moveColl spec=sp1 a=1550 b=-1550 c=0 > boss moveColl spec=sp2 a=1550 b=-1550 c=0 > Note: Collimator piston a and b should be -1550 and 1550 steps away > from their > starting points. Check > to ensure the above command did move they back to their starting > position. > > 8. Take a normal arc and flat. (this should turn off lamps. But please > check > Sop doCalibs narc=1 > Sop doCalibs nflat=1 > FM: 180682-83. > > ********************* > SOS & eBOSS exposures > ********************* > We took a few biases, short darks, full Hartmanns, flats, and arcs with > cartridge 14 to check the aliveness of SOS. Eventually we were able to see > SOS > output files. The HTML logfile pages aren't properly linked yet for access > on > the web, but the files are at /data/boss/sos/$MJD and also > /data/boss/sos/combined, so they can be opened manually from those paths > in a > browser. > > ************** > Guider testing > ************** > The guider camera is now back on the telescope with the spare lens > installed. > The cooling still needs to be reconnected and the front lens refocused on > the > fibers. > > The guide camera and lens were removed from the telescope to test for the > cause > of a focus gradient over the focal plane when looking at the output fiber > block. > See Paul's emails (sdss3-obs 502/SDSS3-infrastructure 9651 and sdss3-obs > 503/SDSS3-infrastructure 9652) for details. > > ************** > Pointing Model > ************** > * getdat [tcc.pterr]pterr_20140824.dat > Read 147 data points > * fix > * use ie ia pzz1 an aw ca > * fit > > coeff change value sigma > > 1 IE +3.465 +6.98 2.195 > 2 IA -13.482 -87.48 3.492 > 3 PZZ1 +10.352 -114.96 2.479 > 4 AN -0.099 +0.69 0.894 > 5 AW -0.514 -9.38 0.896 > 6 CA +8.998 +10.12 2.579 > 7 HWCA2 -0.10 > 8 HWSA2 +1.57 > 9 HNCA1 -0.36 > 10 HNSA1 -1.89 > 11 ACEC -0.21 > 12 ACES +0.12 > 13 TX -7.78 > > Sky RMS = 9.25 > Popn SD = 9.45 > > * use > * fit > > coeff change value sigma > > 1 IE -3.139 +3.84 3.135 > 2 IA +0.090 -87.39 3.471 > 3 PZZ1 -13.195 -128.16 7.638 > 4 AN -1.077 -0.39 1.121 > 5 AW +0.879 -8.50 1.121 > 6 CA -0.162 +9.96 2.720 > 7 HWCA2 +1.610 +1.51 1.486 > 8 HWSA2 +1.597 +3.17 1.496 > 9 HNCA1 -1.154 -1.51 1.739 > 10 HNSA1 +0.226 -1.66 1.740 > 11 ACEC +2.240 +2.03 1.873 > 12 ACES +2.942 +3.06 1.873 > 13 TX +5.308 -2.47 2.910 > > Sky RMS = 9.00 > Popn SD = 9.43 > > Removed three outliers. Resulting fit: > > * getdat [tcc.pterr]PTERR_20140824.DAT;6 > Read 144 data points > * use > * fit > > coeff change value sigma > > 1 IE +0.997 +4.00 1.054 > 2 IA +0.042 -83.20 1.173 > 3 PZZ1 +3.636 -126.76 2.593 > 4 AN -0.058 +0.47 0.376 > 5 AW +0.382 -8.30 0.377 > 6 CA +0.263 +7.87 0.914 > 7 HWCA2 -0.375 +0.20 0.501 > 8 HWSA2 -0.706 +0.85 0.508 > 9 HNCA1 -0.755 -1.55 0.587 > 10 HNSA1 -0.680 -1.61 0.584 > 11 ACEC +0.025 +0.90 0.630 > 12 ACES +0.011 -0.74 0.648 > 13 TX -2.046 -3.36 1.004 > > Sky RMS = 3.00 > Popn SD = 3.15 > > Verified that the new model was written and loaded properly: > > $ move tdat > SYS$SYSDEVICE:[TCC.LOCAL.DAT] > $ type telmod.dat > SYS$SYSDEVICE:[TCC.PTERR]PTERR_20140824.DAT;6 > T 144 3.0018 > IE +3.9958 > IA -83.1996 > PZZ1 -126.7612 > AN +0.4700 > AW -8.3010 > CA +7.8733 > HWCA2 +0.2025 > HWSA2 +0.8530 > HNCA1 -1.5476 > HNSA1 -1.6143 > ACEC +0.9042 > ACES -0.7389 > TX -3.3644 > END > > Closed because of high humidity while we implemented the new pointing > model. > Mounted cart. 1, set instrument back to SPECTRO, adjusted counterweights > back to > 420. > > 10:44Z - Dewpoint depression 1.1C. Turned everything off and called it a > night. > Started 20 BOSS biases and a dark. > > ---- Telescope Status ---- > > Status at: 10:48Z > > Telescope stowed at: 121.0, 30.0, 0.0 mount > Instrument mounted: cartridge = 1 > Counterweights at: 422 420 422 423 > LN2 autofill systems: Connected and turned on > 180L LN2 dewar scales: SP1 125.50 lbs, 20.07 psi > SP2 139.30 lbs, 20.22 psi > > ---- Software Used ---- > > -- STUI software -- > STUI : 1.4.1b4 > alerts : trunk+svn149374 > apo : trunk+svn153334 > boss : trunk+svn157642 > -boss.daq : 1.3.2 > -boss.specMec : 3.0.4 > gcamera : trunk+svn151798 > guider : trunk+svn158013 > hub : Tag: sdss3_v1_2_0 > mcp : v6_6_18 > -mcp.plc : 29 > -mcp.azFiduci : v1_112 > -mcp.altFiduc : v1_112 > -mcp.rotFiduc : v1_112 > platedb : branch_sdss4_platedb_removal+svn157983M > sop : trunk+svn157845 > sos : FAILED > -sos.idlspec2 : FAILED > tcc : 2.14.0 > apogee : not availble > apogeecal : not availble > apogeeql : trunk+svn158024 > > -- Other software -- > sdssProcedure : v3_06 > APO-local : trunk > > ---- Mirror Numbers ---- > > PRIMARY: > -------- > Scale: 1.000000 > > MIGS TONIGHT NOMINAL > Axial A: 0.035 0.037 > Axial B: -0.022 -0.042 > Axial C: -0.021 -0.022 > Trans D: 3.21 3.21 > Lateral E: 10.7188 10.7188 > Lateral F: 12.3063 12.3063 > > GALILS > Commanded: 10850 -450 5750 13050 14750 14300 > Actual: 10850 -450 5750 13050 14750 14300 > > SETMIR VALUES > PrimDesOrient: 0.00 0.00 0.00 651.00 937.40 > PrimOrient: 0.00 0.00 0.00 651.08 936.54 > > SECONDARY: > ---------- > Focus: 0.00 > Air temp: 11.3 > Altitude: 30.0 > > MIGS TONIGHT NOMINAL > Axial A: -7.062 -7.063 > Axial B: -7.124 -7.128 > Axial C: -7.032 -7.034 > Trans D: -0.18 -0.179 > > GALILS > Commanded: 1581300 1578850 1590700 1400 -2000 > Actual: 1581318 1578862 1590704 1400 -2000 > > SETMIR VALUES > SecDesOrient: 1257.00 -3.80 0.00 0.00 9.58 > SecOrient: 1257.00 -3.82 -0.01 -0.01 9.44 > > _____________________________________________________ > Message 1857 of sdss3-25mlog - Logs of nightly APO activities. > > https://trac.sdss3.org/tracmailman/browser/private/sdss3-25mlog/all/1857.html > sdss3-25mlog@sdss3.org > https://sdss3.org/mailman/listinfo/sdss3-25mlog > --047d7bdc9f02a1243f0501649e79 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Thanks to everyone who pushed so hard to get us back on th= e air for a productive night. =C2=A0I am sure that only the tip if the iceb= erg of everything that got done/fixed/patched/diagnosed/hexed yesterday mad= e it onto the mailing lists. --ConnieOn Sun, Aug 24, 2014 at 3:52 AM, &= lt;doravetz@apo.= nmsu.edu> wrote: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0APACHE POINT OBSERVATORY SDSS 2.5M =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0OBSERVING LOG =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 Saturday August 23, 2014 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 (MJD 56893) ----=C2=A0 Observing Team ---- Patrick Gaulme Dan Oravetz Support: Kaike Pan Paul Harding Brian Cherinka John Parejko Kyle Dawson Fritz Stauffer Jon Brinkmann ---- Observing Plan ---- Obtain and implement a pointing model ---- Observing Summary ---- We completed and implemented a new pointing model using the 150-point grid.= We noticed that the flat field screens closed at more than one target below 20= degrees altitude. This happened three times. We took some MaNGA and eBOSS calibrations to test DOS and SOS. We also took= sparse-plugged images for MaNGA. Details in Log. We focused the guider camera and mounted it on the telescope. See Log for d= etails. ---- Observing Log ---- ****************************** Sparse-plugged MaNGA exposures ****************************** ''' Hello, here is the log for sparse plugging test to determine good WMID rang= . It was not very smooth process this afternoon. John requested me to paul on= ce, reading out hung twice, moving collimator timed out once. Anyway, we got th= e data. -kaike ''' 0. Mount a BOSS (or MaNGA) sparse plugging plate. 1. Focus cameras. Full hartmann works on sparse plugging plate. So use hart= mann to focus all cameras. =C2=A0 =C2=A0Recording collimator piston positions on both SP1 and SP2.=C2= =A0 =C2=A0FM: 180626-627 2. Take a normal flat, a 30 sec arc, and a 60 sec arc. The flat can be take= n using sop. But It's better to use "boss =C2=A0exposure" to take arcs ("sop docalibs needs to wait three m= inutes for arc lamps warming up).=C2=A0 =C2=A0 Sorry this was skipped. =C2=A0 =C2=A0sop doCalibs nflat=3D1 flatTime=3D30=C2=A0 FM: 180628 =C2=A0 =C2=A0mcp ne.on =C2=A0 =C2=A0mcp hgcd.on =C2=A0 =C2=A0boss exposure arc iTime=3D30=C2=A0 =C2=A0FM 180629-30 =C2=A0 =C2=A0boss exposure arc iTime=3D60 3. Use ds9 to check the flat, arc exposures to make sure they are really fl= at and arcs (not darks). 4. Move collimator so that blue WMids will move 50 angstroms, then take a 3= 0 sec arc and a 60 sec arc. =C2=A0 =C2=A0boss moveColl spec=3Dsp1 a=3D1550 b=3D-1550 c=3D0 =C2=A0 =C2=A0boss moveColl spec=3Dsp2 a=3D1550 b=3D-1550 c=3D0 =C2=A0 =C2=A0boss exposure arc iTime=3D30 =C2=A0 =C2=A0boss exposure arc iTime=3D60=C2=A0 =C2=A0 FM 631-632 5. Move collimator so that blue WMids will move -5 angstroms, then take a 3= 0 sec arc and a 60 sec arc. =C2=A0 =C2=A0boss moveColl spec=3Dsp1 a=3D-155 b=3D155 c=3D0 =C2=A0 =C2=A0boss moveColl spec=3Dsp2 a=3D-155 b=3D155 c=3D0 =C2=A0 =C2=A0boss exposure arc iTime=3D30 =C2=A0 =C2=A0boss exposure arc iTime=3D60=C2=A0 FM: 633-34 6. Repeat step 5 nineteen (19) more times. 635-36, 637-38, 639-40, 641-42, 643-44, 645-46=C2=A0 =C2=A0John asked to pa= used here so that he can restarted tron. Seems that restarting tron use lot of memory. Paul's session hung so he= quit from STUI. After resume the process, we had file-written issue, and one minute later my STUI quit unexpected. exposure 180647 was hung due to writing file problem? 180648-49 bias and dark. 180650-53 are darks too. Reset up and resume the process,. Collimator moving timed out. So I decided= to move collimator back to the position where 180645 and 180646 were taken, and retake a set t= here. So 180645-646 and 180654-55 should be at the same collimator position. Then=C2=A0 repeat step= 5 thirteen (13 times). 180654-55, 56-57, 58-59, 60-61, 62-63, 64-65, 66-67, 68-69, 70-71, 72-73, 7= 4-75, 76-77, 78-79, 80-81. 7. Move collimators back to their original positions: =C2=A0 =C2=A0mcp ne.off =C2=A0 =C2=A0mcp hgcd.off =C2=A0 =C2=A0boss moveColl spec=3Dsp1 a=3D1550 b=3D-1550 c=3D0 =C2=A0 =C2=A0boss moveColl spec=3Dsp2 a=3D1550 b=3D-1550 c=3D0 =C2=A0 =C2=A0Note: Collimator piston a and b should be -1550 and 1550 steps= away from their starting points. Check =C2=A0 =C2=A0to ensure the above command did move they back to their starti= ng position. 8. Take a normal arc and flat. (this should turn off lamps. But please chec= k =C2=A0 =C2=A0 Sop doCalibs narc=3D1 =C2=A0 =C2=A0 Sop doCalibs nflat=3D1 FM: 180682-83. ********************* SOS & eBOSS exposures ********************* We took a few biases, short darks, full Hartmanns, flats, and arcs with cartridge 14 to check the aliveness of SOS. Eventually we were able to see = SOS output files. The HTML logfile pages aren't properly linked yet for acc= ess on the web, but the files are at /data/boss/sos/$MJD and also /data/boss/sos/combined, so they can be opened manually from those paths in= a browser. ************** Guider testing ************** The guider camera is now back on the telescope with the spare lens installe= d. The cooling still needs to be reconnected and the front lens refocused on t= he fibers. The guide camera and lens were removed from the telescope to test for the c= ause of a focus gradient over the focal plane when looking at the output fiber b= lock. See Paul's emails (sdss3-obs 502/SDSS3-infrastructure 9651 and sdss3-ob= s 503/SDSS3-infrastructure 9652) for details. ************** Pointing Model ************** * getdat [tcc.pterr]pterr_20140824.dat Read=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 147 data points * fix * use ie ia pzz1 an aw ca * fit =C2=A0 =C2=A0 =C2=A0 =C2=A0coeff=C2=A0 =C2=A0 =C2=A0 =C2=A0change=C2=A0 =C2= =A0 =C2=A0value=C2=A0 =C2=A0 sigma =C2=A0 1=C2=A0 =C2=A0 =C2=A0IE=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+3.465=C2= =A0 =C2=A0 =C2=A0+6.98=C2=A0 =C2=A0 2.195 =C2=A0 2=C2=A0 =C2=A0 =C2=A0IA=C2=A0 =C2=A0 =C2=A0 =C2=A0 -13.482=C2=A0 =C2= =A0 -87.48=C2=A0 =C2=A0 3.492 =C2=A0 3=C2=A0 =C2=A0 =C2=A0PZZ1=C2=A0 =C2=A0 =C2=A0 +10.352=C2=A0 =C2=A0-1= 14.96=C2=A0 =C2=A0 2.479 =C2=A0 4=C2=A0 =C2=A0 =C2=A0AN=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-0.099=C2= =A0 =C2=A0 =C2=A0+0.69=C2=A0 =C2=A0 0.894 =C2=A0 5=C2=A0 =C2=A0 =C2=A0AW=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-0.514=C2= =A0 =C2=A0 =C2=A0-9.38=C2=A0 =C2=A0 0.896 =C2=A0 6=C2=A0 =C2=A0 =C2=A0CA=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+8.998=C2= =A0 =C2=A0 +10.12=C2=A0 =C2=A0 2.579 =C2=A0 7=C2=A0 =C2=A0 =C2=A0HWCA2=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0-0.10 =C2=A0 8=C2=A0 =C2=A0 =C2=A0HWSA2=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0+1.57 =C2=A0 9=C2=A0 =C2=A0 =C2=A0HNCA1=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0-0.36 =C2=A010=C2=A0 =C2=A0 =C2=A0HNSA1=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0-1.89 =C2=A011=C2=A0 =C2=A0 =C2=A0ACEC=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 -0.21 =C2=A012=C2=A0 =C2=A0 =C2=A0ACES=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 +0.12 =C2=A013=C2=A0 =C2=A0 =C2=A0TX=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0 -7.78 Sky RMS =3D=C2=A0 =C2=A09.25 Popn SD =3D=C2=A0 =C2=A09.45 * use * fit =C2=A0 =C2=A0 =C2=A0 =C2=A0coeff=C2=A0 =C2=A0 =C2=A0 =C2=A0change=C2=A0 =C2= =A0 =C2=A0value=C2=A0 =C2=A0 sigma =C2=A0 1=C2=A0 =C2=A0 =C2=A0IE=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-3.139=C2= =A0 =C2=A0 =C2=A0+3.84=C2=A0 =C2=A0 3.135 =C2=A0 2=C2=A0 =C2=A0 =C2=A0IA=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+0.090=C2= =A0 =C2=A0 -87.39=C2=A0 =C2=A0 3.471 =C2=A0 3=C2=A0 =C2=A0 =C2=A0PZZ1=C2=A0 =C2=A0 =C2=A0 -13.195=C2=A0 =C2=A0-1= 28.16=C2=A0 =C2=A0 7.638 =C2=A0 4=C2=A0 =C2=A0 =C2=A0AN=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-1.077=C2= =A0 =C2=A0 =C2=A0-0.39=C2=A0 =C2=A0 1.121 =C2=A0 5=C2=A0 =C2=A0 =C2=A0AW=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+0.879=C2= =A0 =C2=A0 =C2=A0-8.50=C2=A0 =C2=A0 1.121 =C2=A0 6=C2=A0 =C2=A0 =C2=A0CA=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-0.162=C2= =A0 =C2=A0 =C2=A0+9.96=C2=A0 =C2=A0 2.720 =C2=A0 7=C2=A0 =C2=A0 =C2=A0HWCA2=C2=A0 =C2=A0 =C2=A0 +1.610=C2=A0 =C2=A0 = =C2=A0+1.51=C2=A0 =C2=A0 1.486 =C2=A0 8=C2=A0 =C2=A0 =C2=A0HWSA2=C2=A0 =C2=A0 =C2=A0 +1.597=C2=A0 =C2=A0 = =C2=A0+3.17=C2=A0 =C2=A0 1.496 =C2=A0 9=C2=A0 =C2=A0 =C2=A0HNCA1=C2=A0 =C2=A0 =C2=A0 -1.154=C2=A0 =C2=A0 = =C2=A0-1.51=C2=A0 =C2=A0 1.739 =C2=A010=C2=A0 =C2=A0 =C2=A0HNSA1=C2=A0 =C2=A0 =C2=A0 +0.226=C2=A0 =C2=A0 = =C2=A0-1.66=C2=A0 =C2=A0 1.740 =C2=A011=C2=A0 =C2=A0 =C2=A0ACEC=C2=A0 =C2=A0 =C2=A0 =C2=A0+2.240=C2=A0 =C2= =A0 =C2=A0+2.03=C2=A0 =C2=A0 1.873 =C2=A012=C2=A0 =C2=A0 =C2=A0ACES=C2=A0 =C2=A0 =C2=A0 =C2=A0+2.942=C2=A0 =C2= =A0 =C2=A0+3.06=C2=A0 =C2=A0 1.873 =C2=A013=C2=A0 =C2=A0 =C2=A0TX=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+5.308=C2= =A0 =C2=A0 =C2=A0-2.47=C2=A0 =C2=A0 2.910 Sky RMS =3D=C2=A0 =C2=A09.00 Popn SD =3D=C2=A0 =C2=A09.43 Removed three outliers. Resulting fit: * getdat [tcc.pterr]PTERR_20140824.DAT;6 Read=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 144 data points * use * fit =C2=A0 =C2=A0 =C2=A0 =C2=A0coeff=C2=A0 =C2=A0 =C2=A0 =C2=A0change=C2=A0 =C2= =A0 =C2=A0value=C2=A0 =C2=A0 sigma =C2=A0 1=C2=A0 =C2=A0 =C2=A0IE=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+0.997=C2= =A0 =C2=A0 =C2=A0+4.00=C2=A0 =C2=A0 1.054 =C2=A0 2=C2=A0 =C2=A0 =C2=A0IA=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+0.042=C2= =A0 =C2=A0 -83.20=C2=A0 =C2=A0 1.173 =C2=A0 3=C2=A0 =C2=A0 =C2=A0PZZ1=C2=A0 =C2=A0 =C2=A0 =C2=A0+3.636=C2=A0 =C2= =A0-126.76=C2=A0 =C2=A0 2.593 =C2=A0 4=C2=A0 =C2=A0 =C2=A0AN=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-0.058=C2= =A0 =C2=A0 =C2=A0+0.47=C2=A0 =C2=A0 0.376 =C2=A0 5=C2=A0 =C2=A0 =C2=A0AW=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+0.382=C2= =A0 =C2=A0 =C2=A0-8.30=C2=A0 =C2=A0 0.377 =C2=A0 6=C2=A0 =C2=A0 =C2=A0CA=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+0.263=C2= =A0 =C2=A0 =C2=A0+7.87=C2=A0 =C2=A0 0.914 =C2=A0 7=C2=A0 =C2=A0 =C2=A0HWCA2=C2=A0 =C2=A0 =C2=A0 -0.375=C2=A0 =C2=A0 = =C2=A0+0.20=C2=A0 =C2=A0 0.501 =C2=A0 8=C2=A0 =C2=A0 =C2=A0HWSA2=C2=A0 =C2=A0 =C2=A0 -0.706=C2=A0 =C2=A0 = =C2=A0+0.85=C2=A0 =C2=A0 0.508 =C2=A0 9=C2=A0 =C2=A0 =C2=A0HNCA1=C2=A0 =C2=A0 =C2=A0 -0.755=C2=A0 =C2=A0 = =C2=A0-1.55=C2=A0 =C2=A0 0.587 =C2=A010=C2=A0 =C2=A0 =C2=A0HNSA1=C2=A0 =C2=A0 =C2=A0 -0.680=C2=A0 =C2=A0 = =C2=A0-1.61=C2=A0 =C2=A0 0.584 =C2=A011=C2=A0 =C2=A0 =C2=A0ACEC=C2=A0 =C2=A0 =C2=A0 =C2=A0+0.025=C2=A0 =C2= =A0 =C2=A0+0.90=C2=A0 =C2=A0 0.630 =C2=A012=C2=A0 =C2=A0 =C2=A0ACES=C2=A0 =C2=A0 =C2=A0 =C2=A0+0.011=C2=A0 =C2= =A0 =C2=A0-0.74=C2=A0 =C2=A0 0.648 =C2=A013=C2=A0 =C2=A0 =C2=A0TX=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-2.046=C2= =A0 =C2=A0 =C2=A0-3.36=C2=A0 =C2=A0 1.004 Sky RMS =3D=C2=A0 =C2=A03.00 Popn SD =3D=C2=A0 =C2=A03.15 Verified that the new model was written and loaded properly: $ move tdat =C2=A0 SYS$SYSDEVICE:[TCC.LOCAL.DAT] $ type telmod.dat SYS$SYSDEVICE:[TCC.PTERR]PTERR_20140824.DAT;6 T=C2=A0 144=C2=A0 =C2=A03.0018 =C2=A0 IE=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+3.9958 =C2=A0 IA=C2=A0 =C2=A0 =C2=A0 =C2=A0 -83.1996 =C2=A0 PZZ1=C2=A0 =C2=A0 =C2=A0-126.7612 =C2=A0 AN=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+0.4700 =C2=A0 AW=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-8.3010 =C2=A0 CA=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0+7.8733 =C2=A0 HWCA2=C2=A0 =C2=A0 =C2=A0 +0.2025 =C2=A0 HWSA2=C2=A0 =C2=A0 =C2=A0 +0.8530 =C2=A0 HNCA1=C2=A0 =C2=A0 =C2=A0 -1.5476 =C2=A0 HNSA1=C2=A0 =C2=A0 =C2=A0 -1.6143 =C2=A0 ACEC=C2=A0 =C2=A0 =C2=A0 =C2=A0+0.9042 =C2=A0 ACES=C2=A0 =C2=A0 =C2=A0 =C2=A0-0.7389 =C2=A0 TX=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0-3.3644 END Closed because of high humidity while we implemented the new pointing model= . Mounted cart. 1, set instrument back to SPECTRO, adjusted counterweights ba= ck to 420. 10:44Z - Dewpoint depression 1.1C. Turned everything off and called it a ni= ght. Started 20 BOSS biases and a dark. ---- Telescope Status ---- Status at: 10:48Z Telescope stowed at:=C2=A0 =C2=A0 121.0, 30.0, 0.0 mount Instrument mounted:=C2=A0 =C2=A0 =C2=A0cartridge =3D 1 Counterweights at:=C2=A0 =C2=A0 =C2=A0 422 420 422 423 LN2 autofill systems:=C2=A0 =C2=A0Connected and turned on 180L LN2 dewar scales:=C2=A0 SP1 125.50 lbs, 20.07 psi =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 SP2 139.30 lbs, 20.22 psi ---- Software Used ---- =C2=A0 -- STUI software -- STUI=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 : 1.4.1b4 alerts=C2=A0 =C2=A0 =C2=A0 =C2=A0 : trunk+svn149374 apo=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0: trunk+svn153334 boss=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 : trunk+svn157642 -boss.daq=C2=A0 =C2=A0 =C2=A0: 1.3.2 -boss.specMec : 3.0.4 gcamera=C2=A0 =C2=A0 =C2=A0 =C2=A0: trunk+svn151798 guider=C2=A0 =C2=A0 =C2=A0 =C2=A0 : trunk+svn158013 hub=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0: Tag: sdss3_v1_2_0 mcp=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0: v6_6_18 -mcp.plc=C2=A0 =C2=A0 =C2=A0 : 29 -mcp.azFiduci : v1_112 -mcp.altFiduc : v1_112 -mcp.rotFiduc : v1_112 platedb=C2=A0 =C2=A0 =C2=A0 =C2=A0: branch_sdss4_platedb_removal+svn157983M= sop=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0: trunk+svn157845 sos=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0: FAILED -sos.idlspec2 :=C2=A0 =C2=A0FAILED tcc=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0: 2.14.0 apogee=C2=A0 =C2=A0 =C2=A0 =C2=A0 : not availble apogeecal=C2=A0 =C2=A0 =C2=A0: not availble apogeeql=C2=A0 =C2=A0 =C2=A0 : trunk+svn158024 =C2=A0 -- Other software -- sdssProcedure : v3_06 APO-local=C2=A0 =C2=A0 =C2=A0: trunk ---- Mirror Numbers ---- PRIMARY: -------- Scale: 1.000000 MIGS=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 TONIGHT NOMINAL Axial A:=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A00.035=C2=A0 =C2=A00.037 Axial B:=C2=A0 =C2=A0 =C2=A0 =C2=A0 -0.022=C2=A0 -0.042 Axial C:=C2=A0 =C2=A0 =C2=A0 =C2=A0 -0.021=C2=A0 -0.022 Trans D:=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A03.21=C2=A0 =C2=A0 3.21 Lateral E:=C2=A0 =C2=A0 =C2=A0 10.7188 10.7188 Lateral F:=C2=A0 =C2=A0 =C2=A0 12.3063 12.3063 GALILS Commanded:=C2=A0 10850 -450 5750 13050 14750 14300 Actual:=C2=A0 =C2=A0 =C2=A010850 -450 5750 13050 14750 14300 SETMIR VALUES PrimDesOrient: 0.00 0.00 0.00 651.00 937.40 PrimOrient:=C2=A0 =C2=A0 0.00 0.00 0.00 651.08 936.54 SECONDARY: ---------- Focus:=C2=A0 =C2=A0 =C2=A0 0.00 Air temp:=C2=A0 =C2=A011.3 Altitude:=C2=A0 =C2=A030.0 MIGS=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 TONIGHT NOMINAL Axial A:=C2=A0 =C2=A0 =C2=A0 =C2=A0 -7.062=C2=A0 -7.063 Axial B:=C2=A0 =C2=A0 =C2=A0 =C2=A0 -7.124=C2=A0 -7.128 Axial C:=C2=A0 =C2=A0 =C2=A0 =C2=A0 -7.032=C2=A0 -7.034 Trans D:=C2=A0 =C2=A0 =C2=A0 =C2=A0 -0.18=C2=A0 =C2=A0-0.179 GALILS Commanded: 1581300 1578850 1590700 1400 -2000 Actual:=C2=A0 =C2=A0 1581318 1578862 1590704 1400 -2000 SETMIR VALUES SecDesOrient: 1257.00 -3.80 0.00 0.00 9.58 SecOrient:=C2=A0 =C2=A0 1257.00 -3.82 -0.01 -0.01 9.44 _____________________________________________________ Message 1857 of sdss3-25mlog - Logs of nightly APO activities. https://trac.sdss3.org/tracmailman/browser= /private/sdss3-25mlog/all/1857.html sdss3-25mlog@sdss3.org https://sdss3.org/mailman/listinfo/sdss3-25mlog --047d7bdc9f02a1243f0501649e79--