Subject: Re: [sdss3-25mlog 1847] 2.5m obslog 20140818 (MJD 56888)
From: "John K. Parejko"
Date: Tue, 19 Aug 2014 12:35:15 -0600
A note on this:
On 19Aug 2014, at 06:06, hjbrew@apo.nmsu.edu wrote:
> 1:40:47 .tcc 0 tcc F Modu=3D"prt_Write"; Text=3D"ss$_Hangup: received =
unsolicited
> character or ^Y on port NTY55:"
> 11:40:47 APO.kpan 245 tcc F Text=3D"doread failed"
> 11:40:47 CmdDone: APO.kpan 245 tcc gcam dofind 6
This error was not the problem. The problem was the below error when you =
set the gcam instrument block. I don't know how to solve this particular =
problem, but the errors you received after this are irrelevant because =
the TCC explicitly stated:
"the guide camera TCC_GCAM1 will not be usable until you fix the =
problem"
when you tried to set the gcam instrument block.
Messages like this showed up in old night logs, but I don't know the =
solution. At least, though, we should be pointing to the correct =
problem.
John
03:40:33.8735Z > '31 2 set inst=3Dengcam_0deg\r'
03:40:33.9849Z < '31 2 I Text=3D"reading file: TINST:DEFAULT.DAT"'
03:40:33.9858Z < '31 2 I Text=3D"reading file: =
TINST:I_CA1_ENGCAM_0DEG.DAT;"'
03:40:34.0245Z < '31 2 I SecFocus=3D0.00'
03:40:34.0253Z < '31 2 I GCFocus=3D0.00'
03:40:34.0261Z < '0 0 I Modu=3D"prt_Init_Forth"; Text=3D"initializing =
TCC_GCAM; obtaining lock"'
03:40:34.0269Z < '0 0 I Modu=3D"prt_Init_Forth"; Text=3D"resynchronizing =
I/O stream"'
03:40:35.9934Z < '0 0 I TrackAdvTime=3D3.57'
03:40:37.9184Z < '0 0 I Modu=3D"prt_Init_Forth"; Text=3D"sending =
initialization command"'
03:40:41.0330Z < '0 0 I TrackAdvTime=3D3.52'
03:40:41.9207Z < '0 0 F Modu=3D"prt_Read"; Text=3D"read timed out on =
port LTA11:"'
03:40:41.9214Z < '0 0 F Modu=3D"prt_Init_Forth"; Text=3D"initialization =
command init failed"'
03:40:41.9223Z < '0 0 W Modu=3D"prt_ChangeDev"; Text=3D"could not =
initialize current device: TCC_GCAM"'
03:40:41.9230Z < '0 0 I Modu=3D"prt_Init_Forth"; Text=3D"initializing =
TCC_GCAM1; obtaining lock"'
03:40:41.9238Z < '0 0 I Modu=3D"prt_Init_Forth"; Text=3D"resynchronizing =
I/O stream"'
03:40:45.9243Z < '0 0 I Modu=3D"prt_Init_Forth"; Text=3D"sending =
initialization command"'
03:40:45.9933Z < '0 0 I TrackAdvTime=3D3.56'
03:40:49.9292Z < '0 0 F Modu=3D"prt_Read"; Text=3D"read timed out on =
port LTA11:"'
03:40:49.9300Z < '0 0 F Modu=3D"prt_Init_Forth"; Text=3D"initialization =
command init failed"'
03:40:49.9308Z < '0 0 W Modu=3D"prt_ChangeDev"; Text=3D"the guide camera =
TCC_GCAM1 will not be usable until you fix the problem"'
03:40:49.9315Z < '0 0 W Modu=3D"prt_ChangeDev"; Text=3D"could not =
initialize new device: TCC_GCAM1"'
03:40:49.9324Z < '0 0 I Modu=3D"prt_ChangeDev"; Text=3D"this instrument =
does not have a: TCC_GMECH"'
03:40:49.9331Z < '31 2 I Text=3D"guide camera focus not adjustable"'
--
*************************
John Parejko
john.parejko@yale.edu
http://www.astro.yale.edu/~jp727/
203 432-9759
JWG 465
Department of Physics
Yale University
New Haven, CT
**************************