Subject: 2.5m obslog 20110403 (MJD 55655) From: kpan@apo.nmsu.edu Date: Mon, 4 Apr 2011 11:48:26 +0000 (UTC) APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Sunday April 03, 2011 (MJD 55655) ---- Observing Team ---- Olena Malanushenko Kaike Pan ---- Observing Plan ---- BOSS ---- Observing Summary ---- High wind speed (up to 50 mph) and high dust counts (up to 350 K) till 9:00Z. We did Kyle's flexure test (see log). wind speed and dust counts improved at 8:40Z, we finished the flexure test at 8:50Z, opened at 9:00. 1 BOSS plates were observed under clear sky but somewhat poor seeing. cart 14, plate 3956. Dust counts up to 350 K. Although we did not open at that time, please check mirrors. Thanks. ---- Observing Log ---- Afternoon: ----------- Actors were checked, they are ok. Cart 14 was mounted and I used it for spectro collimation. Alert window show of and off the same messages: Warn boss.SP2B3VSc2Read Reported by camCheck Warn boss.SP2B2VSc1Read Reported by camCheck Warn boss.SP2R1VSc2Read Reported by camCheck Warn boss.SP2R0VSc1Read Reported by camCheck I cleared them when I started to run STUI as "boss ackErrors" but they still on and off. Strong wind outside with gusts up to 50 mph. Dust counts are around 10K. Telescope was checked. Delay with ventilation because of weather conditions. Night: ------ 02:10Z Wind speed is over 36 mph, guests up to 48 mph. Dust counts are between 100 K to 200 K. It does not looks like we will have a chance to open, at least soon. We decided to do Kyle's flexure test. The test takes more than 8 hours, we called Kyle to make sure that the two sequences of the test can be carried out in different night. 02:20Z: To save lamp warming up time for arc, a set of exposures: subhartmann arc, flat are taken in following command sequence: mcp ne.on mcp hgcd.on sos doHartmann noCorrect sop doCalibs narc=1 sop doCalibs nflat=1 After sub frame hartmann, we need to wait about 80 sec before arc is taken, so we have time to read out full hartmann exposure frames, we tried "sos doHartmann noCorrect noSubframe", it does read out full hartmann frames, but failed at end of the command. The rest of command sequence will not be executed. So subframe hartmann were taken instead of full hartmann. 03:00Z forced filled BOSS spectrograph. Preparing for the test. We adjusted b2 focus ring by 2.5 degree. The last pair of full hartmann frames are: 129144-45. B1 and b2 focus ring request 0.7 and 0.5 degree movement respectively. when r1 and r 2 are in perfect focus. 04:50Z started the test, Telescope position: 121, 90, 0. short hartmann: 129146-147 04:51:54 hartSp1: r=64, b=0.2, txt=OK, sp1Temp = 10.7 ; 04:51:54 sos.sp1AverageMove = -691 04:51:54 hartSp2: r=-52, b=-0.2, txt=OK, sp2Temp = 10.2 ; 04:51:54 sos.sp2AverageMove = -395 arc boss exposure 4.0, file=129148 flat boss exposure 30.0, file=129149 ---flexText -- 05:04:09 az = 121.0, alt = 60.0, rot= 0.0 05:04:25 sos doHartmann noCorrect file=129152,53 outputs from sos shorthartmann analyses. No correction was applied. 05:02:24 hartSp1: r=-80, b=-0.3, txt=OK, sp1Temp = 10.7 ; 05:02:24 sos.sp1AverageMove = -546 05:02:24 hartSp2: r=79, b=0.3, txt=OK, sp2Temp = 10.1 ; arc file=129154 flat file=129155 az = 121.0, alt = 60.0, rot= 30.0 05:12:12 sos doHartmann noCorrect file=129156,57 05:15:23 hartSp2: r=51, b=0.2, txt=OK, sp2Temp = 10.1 ; 05:15:23 sos.sp2AverageMove = -819 05:15:23 hartSp1: r=-226, b=-0.8, txt=OK, sp1Temp = 10.7 ; 05:15:23 sos.sp1AverageMove = -400 arc: file=129158 flat: file=129159 az = 121.0, alt = 60.0, rot= 45.0 05:19:39 sos doHartmann noCorrect, file=129160-61 SOS outputs on pistons and blue focus rings movements are the SAME as the previous one. arc: file=129162 flat: file=129163 az = 121.0, alt = 60.0, rot= 90.0 05:27:22 sos doHartmann noCorrect, file=129164-65 SOS outputs on pistons and blue focus rings movements are the SAME as the previous one. arc: file=129166 flat: file=129167 az = 121.0, alt = 45.0, rot= 0.0 05:36:47 sos doHartmann noCorrect, file=129168-69 05:40:01 hartSp1: r=-240, b=-0.8, txt=OK, sp1Temp = 10.7 ; 05:40:01 sos.sp1AverageMove = -706 05:40:01 hartSp2: r=211, b=0.7, txt=OK, sp2Temp = 10.2 ; 05:40:01 sos.sp2AverageMove = -659 arc: file=129170 flat: file=129171 az = 121.0, alt = 45.0, rot= 30.0 05:44:22 sos doHartmann noCorrect, file=129172-73 05:47:36 hartSp1: r=-226, b=-0.8, txt=OK, sp1Temp = 10.7 ; 05:47:36 sos.sp1AverageMove = -400 05:47:36 hartSp2: r=183, b=0.6, txt=OK, sp2Temp = 10.2 ; 05:47:36 sos.sp2AverageMove = -951 arc: file=129174 flat: file=129175 az = 121.0, alt = 45.0, rot= 45.0 05:51:55 sos doHartmann noCorrect, file=129176-77 SOS outputs on pistons and blue focus rings movements are the SAME as the previous one. arc: file=129178 flat: file=129179 az = 121.0, alt = 45.0, rot= 90.0 05:59:38 sos doHartmann noCorrect, file=129180-81 06:02:50 hartSp2: r=51, b=0.2, txt=OK, sp2Temp = 10.1 ; 06:02:50 sos.sp2AverageMove = -819 hartSp1: r=-226, b=-0.8, txt=OK arc: file=129182 flat: file=129183 az = 121.0, alt = 30.0, rot= 0.0 06:10:50 sos doHartmann noCorrect, file=129184 -85 06:14:00 hartSp1: r=-240, b=-0.8, txt=OK, sp1Temp = 10.4 ; 06:14:00 sos.sp1AverageMove = -706 06:14:01 hartSp2: r=239, b=0.8, txt=OK, sp2Temp = 10.1 ; 06:14:01 sos.sp2AverageMove = -367 arc: file=129186 flat: file=129187 az = 121.0, alt = 30.0, rot= 30.0 06:18:28 sos doHartmann noCorrect, file=129188-89 06:21:39 hartSp2: r=211, b=0.7, txt=OK, sp2Temp = 10.0 ; 06:21:39 sos.sp2AverageMove = -659 06:21:39 hartSp1: r=-226, b=-0.8, txt=OK, sp1Temp = 10.5 ; 06:21:39 sos.sp1AverageMove = -400 arc: file=129190 flat: file=129191 az = 121.0, alt = 30.0, rot= 45.0 06:25:57 sos doHartmann noCorrect, file=129192-93 06:29:08 hartSp2: r=183, b=0.6, txt=OK, sp2Temp = 10.0 ; 06:29:08 sos.sp2AverageMove = -951 hartSp1: r=-226, b=-0.8, txt=OK arc: file=129194 flat: file=129195 az = 121.0, alt = 30.0, rot= 90.0 06:33:41 sos doHartmann noCorrect, file=129196-97 06:37:10 hartSp2: r=51, b=0.2, txt=OK, sp2Temp = 9.9 ; 06:37:10 sos.sp2AverageMove = -819, hartSp1: r=-226, b=-0.8, txt=OK arc: file=129199 flat: file=129199 az = 121.0, alt = 30.0, rot=135.0 06:41:20 sos doHartmann noCorrect, file=129200-01 06:44:38 hartSp2: r=-240, b=-0.8, txt=OK, sp2Temp = 10.0 ; 06:44:38 sos.sp2AverageMove = -847 06:44:38 hartSp1: r=-95, b=-0.3, txt=OK, sp1Temp = 10.4 ; 06:44:38 sos.sp1AverageMove = -851 arc: file=129202 flat: file=129203 az = 121.0, alt = 30.0, rot=180.0 06:49:06 sos doHartmann noCorrect, ff=129204, 05 6:52:19 hartSp2: r=-344, b=-1.2, txt=OK, sp2Temp = 10.0 ; 06:52:19 sos.sp2AverageMove = -423 06:52:19 hartSp1: r=49, b=0.2, txt=OK, sp1Temp = 10.4 ; 06:52:19 sos.sp1AverageMove = -996 arc: file=129206 flat: file=129207 az = 121.0, alt = 30.0, rot=225.0 06:56:46 sos doHartmann noCorrect ff=129208,09 07:00:00 hartSp2: r=-316, b=-1.1, txt=OK, sp2Temp = 10.0 ; 07:00:00 sos.sp2AverageMove = -131 07:00:00 hartSp1: r=355, b=1.2, txt=OK, sp1Temp = 10.3 ; 07:00:00 sos.sp1AverageMove = -982 arc: ff=129210 flat: ff=129211 az = 121.0, alt = 30.0, rot=270.0 07:04:32 sos doHartmann noCorrect ff=129212,13 07:07:51 hartSp2: r=-824, b=-2.8, txt=OK, sp2Temp = 9.9 ; 07:07:51 sos.sp2AverageMove = -904 sp1 - same arc: ff=129214 flat: ff=129215 az = 121.0, alt = 30.0, rot=315.0 07:12:18 sos doHartmann noCorrect, ff=129216,17 07:15:30 hartSp2: r=-560, b=-1.9, txt=OK, sp2Temp = 9.9 ; 07:15:30 sos.sp2AverageMove = -1168 07:15:30 hartSp1: r=209, b=0.7, txt=OK, sp1Temp = 10.3 ; 07:15:30 sos.sp1AverageMove = -836 arc: ff=129218 flat: ff=129219 az = 121.0, alt = 30.0, rot=360.0 07:20:02 sos doHartmann noCorrect, ff=129220,21 07:23:13 hartSp1: r=-80, b=-0.3, txt=OK, sp1Temp = 10.3 ; 07:23:13 sos.sp1AverageMove = -546 07:23:14 hartSp2: r=-428, b=-1.5, txt=OK, sp2Temp = 9.9 ; 07:23:14 sos.sp2AverageMove = -1300 arc: ff=129222 flat: ff=129223 With Elena's script, the test was done in auto mode, it took more than 2.5 hours. According to short hartmann results, it looks spectrographs could be in focus for almost all positions if corrections was allowed. Therefore we decided to took another set of data for altitude of 30 degrees, and with correction. 07:38Z took full hartmann, file=129226-227 07:43Z moved r1 pistons by 260 steps. 07:45Z hartmann, file=129228-228 Hartmann indicated that b1 and b2 need -1.0 and 0.7 degree movement respectively. We think that part of the reason for -1.0 degree on b1 is slightly lower temperature. We decided to do another cycle with correction applied. az = 121.0, alt = 30.0, rot= 0.0 07:47:42 sos doHartmann ok, file = 129230, 129231 7:50:55 hartSp2: r=267, b=0.9, txt=OK, sp2Temp = 9.7 ; 07:50:55 sos.sp2AverageMove = -75 07:50:58 motorPos.sp2.move: -74, -75, -74; 07:50:58 hartSp1: r=-371, b=-1.3, txt=OK, sp1Temp = 10.2 ; 07:50:58 sos.sp1AverageMove = -255 07:51:02 motorPos.sp1.move: -254, -255, -255; 07:49:54 sop doCalibs narc=1, ok, file=129232 07:52:42 sop sop doCalibs nflat=1, ok, file=129233 az = 121.0, alt = 30.0, rot= 30.0 07:55:17 sos doHartmann, ok, file = 129234, 129235 07:58:28 hartSp2: r=239, b=0.8, txt=OK, sp2Temp = 9.8 ; 07:58:28 sos.sp2AverageMove = -367 07:58:32 motorPos.sp2.move: -369, -373, -368; 07:58:32 hartSp1: r=-342, b=-1.2, txt=OK, sp1Temp = 10.1 ; 07:58:32 sos.sp1AverageMove = 354 07:58:36 motorPos.sp1.move: 354, 354, 354; 07:57:28 sop doCalibs narc=1, ok, file=129236 08:00:17 sop sop doCalibs nflat=1, ok, file=129237 az = 121.0, alt = 30.0, rot= 45.0 08:02:48 sos doHartmann, ok, file = 129238, 129239 08:05:59 hartSp1: r=-517, b=-1.8, txt=OK, sp1Temp = 10.0 ; 08:05:59 sos.sp1AverageMove = -109 08:06:03 motorPos.sp1.move: -109, -109, -109; 08:06:03 hartSp2: r=267, b=0.9, txt=OK, sp2Temp = 9.7 ; 08:06:03 sos.sp2AverageMove = -75 08:06:07 motorPos.sp2.move: -73, -69, -74; 08:04:59 sop doCalibs narc=1, ok, file=129240 08:07:49 sop sop doCalibs nflat=1, ok, file=129241 az = 121.0, alt = 30.0, rot= 90.0 08:10:35 sos doHartmann, ok, file = 129242, 129243 08:13:46 hartSp1: r=-357, b=-1.2, txt=OK, sp1Temp = 10.0 ; 08:13:46 sos.sp1AverageMove = 50 08:13:53 motorPos.sp1.move: 49, 53, 50; 08:13:53 hartSp2: r=135, b=0.5, txt=OK, sp2Temp = 9.6 ; 08:13:53 sos.sp2AverageMove = 56 08:13:57 motorPos.sp2.move: 55, 54, 54; 08:12:49 sop doCalibs narc=1. ok, file=129244 08:15:33 sop sop doCalibs nflat=1, ok, file=129245 az = 121.0, alt = 30.0, rot=135.0 08:18:21 sos doHartmann, ok, file = 129246, 129247 08:21:33 hartSp2: r=-156, b=-0.5, txt=OK, sp2Temp = 9.7 ; 08:21:33 sos.sp2AverageMove = 28 08:21:40 motorPos.sp2.move: 28, 32, 35; 08:21:40 hartSp1: r=-371, b=-1.3, txt=OK, sp1Temp = 9.9 ; 08:21:40 sos.sp1AverageMove = -255 08:21:45 motorPos.sp1.move: -254, -256, -255; 08:20:37 sop doCalibs narc=1, ok, file=129248 08:23:19 sop sop doCalibs nflat=1, ok, file=129249 az = 121.0, alt = 30.0, rot=180.0 08:26:07 sos doHartmann, ok, file = 129250, 129251 08:29:21 hartSp1: r=-66, b=-0.2, txt=OK, sp1Temp = 9.9 ; 08:29:21 sos.sp1AverageMove = -240 08:29:24 motorPos.sp1.move: -240, -239, -241; 08:29:24 hartSp2: r=-260, b=-0.9, txt=OK, sp2Temp = 9.7 ; 08:29:24 sos.sp2AverageMove = 452 08:29:28 motorPos.sp2.move: 453, 452, 451; 08:28:20 sop doCalibs narc=1, ok, file=129252 08:31:03 sop sop doCalibs nflat=1, ok, file=129253 az = 121.0, alt = 30.0, rot=225.0 08:33:51 sos doHartmann, ok, file = 129254, 129255 08:37:02 hartSp2: r=-128, b=-0.4, txt=OK, sp2Temp = 9.6 ; 08:37:02 sos.sp2AverageMove = 320 08:37:06 motorPos.sp2.move: 320, 320, 321; 08:37:06 hartSp1: r=238, b=0.8, txt=OK, sp1Temp = 9.9 ; 08:37:06 sos.sp1AverageMove = -226 08:37:09 motorPos.sp1.move: -226, -226, -225; 08:36:01 sop doCalibs narc=1, ok, file=129256 08:38:49 sop sop doCalibs nflat=1, ok, file=129257 az = 121.0, alt = 30.0, rot=270.0 08:41:32 sos doHartmann, ok, file = 129258, 129259 08:44:45 hartSp1: r=253, b=0.9, txt=OK, sp1Temp = 9.9 ; 08:44:45 sos.sp1AverageMove = 79 08:44:49 motorPos.sp1.move: 77, 78, 78; 08:44:49 hartSp2: r=-796, b=-2.7, txt=OK, sp2Temp = 9.6 ; 08:44:49 sos.sp2AverageMove = -612 08:44:52 motorPos.sp2.move: -614, -613, -612; 08:43:44 sop doCalibs narc=1, ok, file=129260 08:46:28 sop sop doCalibs nflat=1, ok, file=129261 az = 121.0, alt = 30.0, rot=315.0 08:49:14 sos doHartmann, ok, file = 129262, 129263 08:52:25 hartSp1: r=-52, b=-0.2, txt=OK, sp1Temp = 9.8 ; 08:52:25 sos.sp1AverageMove = 64 08:52:29 motorPos.sp1.move: 64, 63, 64; 08:52:29 hartSp2: r=-636, b=-2.2, txt=OK, sp2Temp = 9.6 ; 08:52:29 sos.sp2AverageMove = -451 08:52:33 motorPos.sp2.move: -453, -452, -451; 8:51:25 sop doCalibs narc=1, ok, file=129264 08:54:10 sop sop doCalibs nflat=1, ok, file=129265 az = 121.0, alt = 30.0, rot=360.0 08:56:57 sos doHartmann, ok, file = 129266, 129267 09:00:09 hartSp1: r=-197, b=-0.7, txt=OK, sp1Temp = 9.8 ; 09:00:09 sos.sp1AverageMove = 209 09:00:13 motorPos.sp1.move: 211, 211, 210; 09:00:13 hartSp2: r=-476, b=-1.6, txt=OK, sp2Temp = 9.5 ; 09:00:13 sos.sp2AverageMove = -291 09:00:17 motorPos.sp2.move: -289, -290, -291; 08:59:09 sop doCalibs narc=1, ok, file=129268 09:01:54 sop sop doCalibs nflat=1, ok, file=129269 08:50Z started ventilation. 09:00Z enclosure off. 09:15Z cart 14, plate 3956. b1 focus ring was adjusted by -8 degrees. 09:20Z took a full hartmann to confirm b1 focus ring setting. 09:38Z gotoField. GSOGTF. 09:30:17 boss Idle 09:30:28 hartSp2: r=-80, b=-0.3, txt=OK, sp2Temp = 7.1 ; 09:30:28 sos.sp2AverageMove = -687 09:30:32 motorPos.sp2.move: -688, -687, -687; 09:30:32 hartSp1: r=369, b=1.3, txt=OK, sp1Temp = 7.2 ; 09:30:32 sos.sp1AverageMove = -676 09:52Z started 15 min science x 6. Sky was clear. Guider seeing at 2.2-2.6". The plate is not done yet. MJD b1 r1 b2 r2 Texp Sum Plugfile ------------------------------------------------------------ 55654 1.1 2.3 1.1 2.2 900.8 6.7 3956-55654-01 55655 1.6 4.1 1.2 2.7 900.8 9.6 3956-55654-01 55655 1.7 4.3 1.3 2.7 900.8 10.0 3956-55654-01 55655 1.9 4.4 1.4 2.4 900.8 10.1 3956-55654-01 55655 1.4 3.4 1.0 1.4 900.8 7.2 3956-55654-01 55655 1.6 3.8 1.1 1.3 900.8 7.8 3956-55654-01 55655 1.5 4.1 1.2 1.4 900.8 8.2 3956-55654-01 ------------------------------------------------------------ 10.8 26.4 8.3 14.1 6305.6 --> 59.6 11:45Z enclosure on. ---- Telescope Offsets and Scale ---- 10:08:23 14-3956A -40.2 74.2 144.6 (-7.7,-2.7) (32.9) ( 0.0,14.4, 0.0) 1.000439 auto ---- Focus Log ---- 10:08:23 14-3956A 1.000439 -4338 -1466 993 -40.2 74.2 2.9 22 322 2.4 auto ---- Weather Log ---- Wind Time Temp F Dewp F MPH Direction Dust UT dpTmp dewPt Winds Windd Dust3 18:00 52.9 17.8 22.7 287.3 16650 18:15 54.4 18.8 24.5 258.9 15887 18:30 55.5 18.7 15.6 252.7 15079 18:45 56.7 20.9 21.0 257.5 16453 19:00 55.9 16.6 24.6 258.1 19628 19:15 55.8 18.3 16.9 274.6 19414 19:30 56.3 17.4 19.5 248.6 20221 19:45 56.8 16.9 26.4 252.0 21951 20:00 54.9 14.7 37.6 277.3 72957 20:15 56.1 14.7 34.9 272.6 32090 20:30 56.3 16.6 34.1 268.0 29617 20:45 56.5 15.2 21.9 264.2 30292 21:00 56.5 14.8 26.2 253.0 34305 21:15 57.2 16.6 33.3 265.0 41002 21:30 55.6 16.9 27.3 244.0 24787 21:45 58.0 17.7 35.5 248.0 25155 22:00 56.8 18.0 35.0 239.0 20761 22:15 56.6 17.9 17.4 254.9 22175 22:30 56.7 17.9 35.0 270.3 25485 22:45 55.7 17.3 28.7 261.3 26662 23:00 55.8 17.3 46.5 258.6 26175 23:15 56.6 17.8 38.9 267.3 28486 23:30 57.7 18.3 27.9 256.8 29095 23:45 56.0 17.2 30.8 253.9 37118 00:00 55.6 17.7 21.3 266.1 28070 00:15 55.5 17.0 31.5 251.3 30019 00:30 54.3 17.7 38.3 258.6 30513 00:45 53.7 16.8 25.3 262.7 28770 01:00 52.5 16.0 30.2 259.0 37349 01:15 51.6 15.8 32.4 259.8 43371 01:30 50.8 14.4 17.1 273.9 75735 01:45 49.9 12.4 34.5 269.7 242802 02:00 49.6 11.0 21.0 275.6 246559 02:15 49.3 10.7 32.2 289.3 261382 02:30 48.9 11.7 36.8 260.2 122055 02:45 48.6 12.7 27.6 282.5 73459 03:00 48.2 13.2 30.5 274.1 93046 03:15 47.8 13.9 23.4 258.0 74442 03:30 47.4 13.6 33.0 267.8 58422 03:45 47.0 13.8 27.4 271.5 32593 04:00 47.0 13.8 41.1 272.5 30235 04:15 46.5 12.7 26.9 269.5 21796 04:30 46.2 13.5 36.0 272.1 26187 04:45 45.7 14.9 27.9 266.7 32071 05:00 45.5 14.4 22.5 266.0 27164 05:15 45.5 14.8 33.8 270.2 25799 05:30 45.2 15.9 24.7 272.1 21430 05:45 44.5 16.8 29.5 267.9 30218 06:00 44.1 17.1 24.0 266.4 51463 06:15 43.9 17.4 21.7 261.7 46682 06:30 43.2 17.9 19.8 269.7 43220 06:45 43.3 18.0 18.2 282.6 56737 07:00 42.8 18.3 26.9 287.6 67768 07:15 42.8 18.6 23.6 270.8 57249 07:30 42.6 18.9 26.4 288.1 38222 07:45 41.9 18.8 25.1 286.9 26426 08:00 41.8 19.2 21.4 288.8 23447 08:15 41.6 20.0 20.0 292.7 16113 08:30 41.2 20.0 19.5 304.0 14579 08:45 40.8 20.0 17.0 317.3 14193 09:00 40.5 19.9 21.9 314.1 13418 09:15 39.8 18.9 9.4 303.8 12826 09:30 39.3 19.8 24.4 297.9 13053 09:45 38.3 20.4 14.0 292.6 14972 10:00 37.4 21.7 21.8 330.3 14104 Time Inst Temp DP Dif Humid Wind Dir Dust,1um IRSC IRSCm 10:08:23 14-3956A 2.9 -5.4 8.3 54 22 322 1405 5.1 1559.0 2.4 auto ---- Telescope Status ---- 08:45Z - Began ventilation. Doors and louvers opened, fans on. 09:00Z - Enclosure off. 11:45Z - Enclosure on, doors and louvers closed, fans off. No interlocks bypassed. Status at: 11:55Z Telescope stowed at: 30,121,00 mount Instrument mounted: Cartridge 14 Counterweights at: 281 lbs LN2 autofill systems: Connected and turned on. 180L LN2 dewar scales: SP1 100 lbs, 19 psi SP2 160 lbs, 23 psi ---- Software Used ---- getVersions, 2011-04-04 03:23:47; ----STUI software: STUI: 1.0 2011-03-15; alerts: v1_1_4; apo: v1_7; boss: v2_5_0; boss.daq: 1.3.1; boss.specMech: 3.0.1; gcamera: v1_2_3; guider: v1_3_4; hub: Tag: sdss3_v1_1_5; mcp: v6_6_6; mcp.plc: 26; platedb: v1_0_5; sop: v1_1_9; sos: v1_1_7; sos.idlspec2d: v5_4_25; tcc: 2.14.0; -----Other software sdssProcedure(sdss3): v3_06; ---- Mirror Numbers ---- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A: -5.518 -5.520 Axial B: -0.018 -0.022 Axial C: 15.927 15.924 Trans D: 11.031 11.033 Lateral E: 10.6553 10.6426 Lateral F: 12.2555 12.2428 GALILS Commanded: 10600 -250 5800 10250 13050 12650 Actual: 10600 -250 5800 10250 13050 12650 SETMIR VALUES PrimDesOrient: 0.00 -13.67 10.53 574.80 742.37 PrimOrient: 0.00 -13.67 10.53 574.80 742.37 SECONDARY: ---------- Focus: 0.00 Air temp: 13.0 Altitude: 30.0 MIGS TONIGHT NOMINAL Axial A: -7.835 -7.835 Axial B: -2.439 -2.442 Axial C: 13.809 13.810 Trans D: 14.181 14.184 GALILS Commanded: 1585350 1566700 1598900 -1450 -50 Actual: 1585369 1566704 1598880 -1450 -50 SETMIR VALUES SecDesOrient: 1257.00 -9.00 -4.00 -58.00 23.67 SecOrient: 1257.01 -9.00 -4.00 -58.08 23.31