Date: Fri, 29 Aug 2008 15:15:12 -0600 From: Dan Long Subject: 2.5m Day Log 20080829 Engineering Handoff: ==================== The engineering hand-off is complete (at least everything that can be done without opening the enclosure). Note: The old guider is on the second shelf from the top of the cabinet just to the left of the door in the engineering trailer, should you need to revert to it over the weekend. Spectrograph Fills: =================== A couple of times today a secondary fill was forced. When it completed a manual fill was initiated. In both cases the 10 L dewars almost immediately began venting liquid (less than an additional pound of LN2 was added). We will continue this test over the next week to see if we are getting any full sensor glitches. I would recommend the observers do the same when topping off the spectrographs prior to observing just to be sure the dewars are indeed full. If we don't see any evidence of short fills over the next week, we can go back to the standard operation for fills. M2 Galil Problem: ================= Yesterday afternoon marked another occurrence of the garbled galil output we've seen happen once every month or two. Despite appearances it seems it isn't a galil problem, at least not directly. The reason I say this is that we have seen this happen with both M2 galils. A reboot of the galil clears the problem, however since it happens with both galils, it seems unlikely that we are seeing a problem with both of them. Rather it may be something else in the communications chain is getting confused, or confusing the galil. It almost looks like some hex data stream is getting mixed in with the normal galil response. See excerpts from the TCC log below for some examples. 2008-08-28 22:32:08.913Z 0 0 W Expected="A=1626627.; B=1528808.; C=1595583.; D=-2945.; E=-4561.; MG \"OK\"" 2008-08-28 22:32:08.913Z 0 0 W Received="8.; C=15?95583.; D=-294?5.; E=-4561.; ?MG \"OK\"" 2008-08-28 22:32:08.914Z 0 0 F Modu="prt_ReadMatch"; Text="bad reply" 2008-08-28 22:32:08.914Z 0 0 F Modu="mir_o_MoveOneGalil"; Text="could not specify new positions for Sec mirror actuators" 2008-08-28 22:32:08.914Z 0 0 W Text="failed to adjust collimation and focus" -- 2008-08-28 22:33:09.967Z 0 0 W Expected="A=1626627.; B=1528808.; C=1595583.; D=-2945.; E=-4561.; MG \"OK\"" 2008-08-28 22:33:09.969Z 0 0 W Received="00000 00000020 00000000 0000FFFF 0000270D 00000000 0000FFFF FFFF8000 " 2008-08-28 22:33:09.971Z 0 0 F Modu="prt_ReadMatch"; Text="bad reply" 2008-08-28 22:33:09.972Z 0 0 F Modu="mir_o_MoveOneGalil"; Text="could not specify new positions for Sec mirror actuators" 2008-08-28 22:33:09.974Z 0 0 W Text="failed to adjust collimation and focus" -- 2008-08-28 22:34:11.089Z 0 0 W Expected="A=1626627.; B=1528808.; C=1595583.; D=-2945.; E=-4561.; MG \"OK\"" 2008-08-28 22:34:11.091Z 0 0 W Received="0003ED72 " 2008-08-28 22:34:11.092Z 0 0 F Modu="prt_ReadMatch"; Text="bad reply" 2008-08-28 22:34:11.094Z 0 0 F Modu="mir_o_MoveOneGalil"; Text="could not specify new positions for Sec mirror actuators" 2008-08-28 22:34:11.096Z 0 0 W Text="failed to adjust collimation and focus" -- 2008-08-28 22:35:12.169Z 0 0 W Expected="A=1626627.; B=1528808.; C=1595583.; D=-2945.; E=-4561.; MG \"OK\"" 2008-08-28 22:35:12.170Z 0 0 W Received=">A=1626627.; B=?1528808.; C=15?95583.; D=-294?5.; E=-4561.; ?MG \"OK\"" 2008-08-28 22:35:12.172Z 0 0 F Modu="prt_ReadMatch"; Text="bad reply" 2008-08-28 22:35:12.174Z 0 0 F Modu="mir_o_MoveOneGalil"; Text="could not specify new positions for Sec mirror actuators" 2008-08-28 22:35:12.175Z 0 0 W Text="failed to adjust collimation and focus" -- 2008-08-28 22:36:13.249Z 0 0 W Expected="A=1626627.; B=1528808.; C=1595583.; D=-2945.; E=-4561.; MG \"OK\"" 2008-08-28 22:36:13.251Z 0 0 W Received="64C08FFC BUSSER" 2008-08-28 22:36:13.253Z 0 0 F Modu="prt_ReadMatch"; Text="bad reply" 2008-08-28 22:36:13.255Z 0 0 F Modu="mir_o_MoveOneGalil"; Text="could not specify new positions for Sec mirror actuators" 2008-08-28 22:36:13.256Z 0 0 W Text="failed to adjust collimation and focus" Cheers, Dan