Subject: 2.5m obslog 20060616 (MJD 53903)
Date: Sat, 17 Jun 2006 05:20:08 -0600 (MDT)
From: observer@apo.nmsu.edu
                       APACHE POINT OBSERVATORY SDSS 2.5M
                                 OBSERVING LOG
                              Friday June 16, 2006
                                  (MJD 53903)
---=== OBSERVING TEAM ===---
Days:  Dan Long
Night:  Mike Harvanek
        Jurek Krzesinski
        Shannon Watters
Eric Neilsen, Steve Kent  - on the phone.
---=== OBSERVING PLAN ===---
        Shake/Science!
---=== OBSERVING SUMMARY ===---
Done some imaging, but the seeing was bad.
One plate done (1813) and got good signal on two others.
Telescope pointing looks good.
dust integrated counts are low:  26483
Problems:
---------
tccmon, iop, stripe number: see the log.
tcc - too many open session limit, can we increase that limit up to 30-40?
---=== OBSERVING LOG ===---
Afternoon:
----------
        No problems with the afternoon check.
        Spectro focus was checked and adjusted for the cooler temperatures
        expected tonight.  It is now set for a still rather warm 16 C.
01:50Z  Doors Open, Fans On.
Night:
------
02:55Z cart 2 plt 1813 on the telescope. SOGTF.
02:57Z while guiding, suddenly startMon (SAOIMAGE) crashed on us, the
       error message was cut and pasted to the problem section.
       Plate done.
04:00Z Imager mounted .... and clouds arrived. Since it's still shake
       we try to test the imager anyway.
       Looks like we still have the problem with 290 stripe reported
       last dark run:
im> im> scanStripe 290 N -mu 277
im> goDrift
Flavor of this run
  (science, bias, calibration, engineering, ignore, help) []: science
Stripe, Strip (e.g, 22,N or SS,N) [290,N]:
Please provide a one line comment [] tcc thinks it's 1078
Input stripe and strip do not match actual telescope pointing.
Continue anyway? y        caget tpm_TM_PMSSAvg tpm_TM_TelairAvg.VALA
tpm_TM_PMSSAvg                17.5914
tpm_TM_TelairAvg.VALA         16.9225
     Mean offset (pix)                Collimator Position
                                   sp1                   sp2
     b1   r1    b2  r2        A     B     C       A      B      C
old .19  .07  -.07  .17     19020 19040 18600    7050   4390   4420
new .28 -.05   .02  .06     18020 18040 17610    6050   3390   3420
Now set for approximately 16 C
SAOIMAGE problem:
-----------------
2006-06-17 02:57:26Z: registered (addr3) listener sdsshost2.apo.nmsu.edu:observe
r:5781
SOPGUI: tccSetFocus -50.0
X connection to monx1:0.0 broken (explicit kill or server shutdown).
Trouble when writing to FSAOimage.
Make sure the fsao product has been setup before doing saoDisplay.
Trouble when writing to FSAOimage.
Make sure the fsao product has been setup before doing saoDisplay.
    while executing
"saoDrawPolygon 224 226 228 226 -s 1"
    ("eval" body line 1)
    invoked from within
"eval saoDrawPolygon  [expr $r_cen-$size] [expr $c_cen]  [expr $r_cen+$size] [ex
pr $c_cen] $opts"
    invoked from within
"if {$type == "+"} {
      eval saoDrawPolygon  [expr $r_cen-$size] [expr $c_cen]  [expr $r_cen+$size
] [expr $c_cen] $opts
      eval saoDrawPolygon  [ ..."
    (procedure "draw_cross" line 2)
    invoked from within
"draw_cross + $ycen $xcen "-s $saoNum""
    (procedure "showGuideStars" line 57)
    invoked from within
"showGuideStars 150 450 75 1 1"
    invoked from within
"if {![info exists guiderInfo(simple)]} {
      showSimpleFrame
   } elseif {$guiderInfo(simple) == 1} {
      showSimpleFrame
   } else {
      showGu ..."
    (procedure "showGuiderFrame" line 4)
    invoked from within
"showGuiderFrame"
    invoked from within
"if $display {
               showGuiderFrame
           }"
    invoked from within
"if {$imageName == $guiderInfo(lastImage)} { ;# old filename?
           return ""
       } else {
           guiderFrameDel;  # clean up
           set guiderInfo(las ..."
    invoked from within
"if [catch {set imageName [lastGuiderFile]} msg] {
      echo "$msg"
      return ""
   } elseif {[regexp {([^/]*gimg)([0-9]+)(.fits$)} $imageName]} {  ..."
    (procedure "checkForNewImage" line 11)
    invoked from within
"checkForNewImage 1 0"
    invoked from within
"if {[checkForNewImage 1 0] != ""} {
        schedule checkAndGuide {} 0
        guiderLoop $verbose $boresight
        set guiderInfo(waiting) 1
        schedule asyncCheck [list ..."
    (procedure "checkAndGuide" line 14)
    invoked from within
"checkAndGuide 0 0 15"
    ("eval" body line 1)
    invoked from within
"eval $procname $args"
checkAndGuide is scheduled, further errors sent to murmur
tcc too many users problem:
-----------------------
im> initNight
2006-06-17 04:26:34Z: IOP Ready for flight
im> startDa -tcc
TCCUSER
Password:
    Last interactive login on Saturday, 17-JUN-2006 04:11:12.09
Your process name is _NTY1167:
0 0 F Text="no more users allowed; MaxUsers = 25"
0 0 ! Text="TCCInterp dies"
  TCCUSER      logged out at 17-JUN-2006 04:27:24.16