Date: Wed, 19 Jan 2005 11:51:18 -0500 (EST) From: jegunn Subject: Re: 2.5m obslog 20050118 (MJD 53389): Lamp spares There is SUPPOSED to be a spare built-up unit with a new bulb in it-- the notion was never to change bulbs at the level you guys had to try it, which is a little tricky even in the lab. Actually, there are supposed, as I remember, to be THREE such assemblies, one with a flat lamp, one with a neon, and one with an Hg-Cd, and the discussion came to the place to keep them was in a drawer in the observing room. What happened???? thanks --jim On Wed, 19 Jan 2005, Atsuko Kleinman wrote: > > APACHE POINT OBSERVATORY SDSS 2.5M > > OBSERVING LOG > Tuesday January 18, 2005 > > (MJD 53389) > > ---=== OBSERVING TEAM ===--- > > Swing: Howard Brewington > Night: Mike Harvanek > Atsuko Kleinman > Dimm: Steph Snedden > Injury List: Jurek Krzesinski who landed on ice instead of snow. > > > Visitors: Suzanne Hawley > Russell Owen > Larry Carey > ---=== OBSERVING PLAN ===--- > > Science! > ---=== OBSERVING SUMMARY ===--- > > o iop v3_143_0a tested and declared current > > o Two plates done 1939 and 1951 > > o flat field lamp3 is dead. Please replace. > > o Imaging 20N from -51.9 to -36.8 & -30.7 to -23.1. > > o The imager is still mounted. > > ---=== OBSERVING LOG ===--- > > Afternoon: > ------------ > Had to reboot photo 02, but had no other problems. > The spectro focus was not checked because the imager was mounted. > > Night: > -------- > > We start with imager bias in the dark enclosure. > > Run 5122 bias on the telescope in the dark enclosure. > ========================================================= > We noticed after taking biases that we were using the current iop and not > the latest greatest iop (v3_143_0a). We switch iop sessions before > starting our flats. > > Run 5123 flats > ================================= > We have recurring abort watcher errors tonight. > azimuth (ABORT_EVENT: 2005-01-19 01:52:12Z) > rotator (ABORT_EVENT: 2005-01-19 01:52:12Z) > altitude (ABORT_EVENT: 2005-01-19 02:02:52Z) > > > DIMM > ===== > > Steph took a look at DIMM and all is fine. Steph is thinking of few > procedure modifications. She thinks that syncing the telescope more > than once will make it easier to center Polaris in the middle of the > chip. Also, we will sync both time and date at the beginning of the > night for now since powering down the software seems to loose both the > time and date information sometimes. > > biasCheck, checkBias, checkFlats all showed that things are well. > Here are the results. > > > im> checkBias 5122 33 . > {46 WARN: } > {46 FAIL: rightRNComp } > > Open /skycat/imager/53389/5122-33-u-bias.gif/gif > Open /skycat/imager/53389/5122-33-g-bias.gif/gif > Open /skycat/imager/53389/5122-33-r-bias.gif/gif > Open /skycat/imager/53389/5122-33-i-bias.gif/gif > Open /skycat/imager/53389/5122-33-z-bias.gif/gif > Open /skycat/imager/53389/5122-33-o-bias.gif/gif > Open /skycat/imager/53389/5122-33-l-bias.gif/gif > Open /skycat/imager/53389/5122-33-t-bias.gif/gif > Open /skycat/imager/53389/5122-33-s-bias.gif/gif > {photo h5} {astro h6} > im> > > im> biasCheck 5122 > Directory /data/photo/53389/5122, Field 39 > Select reference mjd > 0. 51853 > 1. 51923 > . > . > . > 44. 53360 > 45. 53389 > Select index of reference mjd [45]: 44 > Writing file /astrolog/53389/idBiasCheck-005122.par > CCD 11 Offset. Left: -2.00 +/- 0.00 Right: -1.93 +/- 0.29 > CCD 21 Offset. Left: -2.00 +/- 0.00 Right: -2.33 +/- 0.54 > CCD 31 Offset. Left: -2.00 +/- 0.00 Right: -1.96 +/- 0.22 > CCD 41 Offset. Left: -3.00 +/- 0.00 Right: -3.00 +/- 0.00 > CCD 51 Offset. Left: 3.29 +/- 0.46 Right: 3.24 +/- 0.43 > CCD 12 Offset. Left: -1.41 +/- 0.55 Right: -1.10 +/- 0.31 > CCD 22 Offset. Left: -2.00 +/- 0.00 Right: -2.67 +/- 0.47 > CCD 32 Offset. Left: 21.08 +/- 0.30 Right: -0.10 +/- 0.30 > CCD 42 Offset. Left: -2.00 +/- 0.00 Right: -2.00 +/- 0.00 > CCD 52 Offset. Left: -0.10 +/- 0.30 Right: 0.00 +/- 0.00 > CCD 13 Offset. Left: -2.00 +/- 0.00 Right: -2.00 +/- 0.00 > CCD 23 Offset. Left: -1.25 +/- 0.43 Right: -2.00 +/- 0.00 > CCD 33 Offset. Left: -14.00 +/- 0.00 Right: -2.00 +/- 0.00 > CCD 43 Offset. Left: -0.53 +/- 0.50 Right: -1.00 +/- 0.00 > CCD 53 Offset. Left: -0.11 +/- 0.31 Right: -2.00 +/- 0.00 > CCD 14 Offset. Left: -1.00 +/- 0.00 Right: -1.00 +/- 0.00 > CCD 24 Offset. Left: -2.00 +/- 0.00 Right: -1.00 +/- 0.00 > CCD 34 Offset. Left: 4.11 +/- 0.45 Right: 4.11 +/- 0.40 > CCD 44 Offset. Left: -1.00 +/- 0.00 Right: 0.00 +/- 0.00 > CCD 54 Offset. Left: -1.00 +/- 0.00 Right: -2.00 +/- 0.00 > CCD 15 Offset. Left: -1.50 +/- 0.51 Right: -1.00 +/- 0.00 > CCD 25 Offset. Left: -3.83 +/- 0.37 Right: -3.83 +/- 0.37 > CCD 35 Offset. Left: -0.47 +/- 1.58 Right: 0.11 +/- 0.31 > CCD 45 Offset. Left: -1.00 +/- 0.00 Right: 0.00 +/- 0.00 > CCD 55 Offset. Left: -1.36 +/- 0.48 Right: -1.17 +/- 0.52 > CCD 16 Offset. Left: -2.00 +/- 0.00 Right: -2.00 +/- 0.00 > CCD 26 Offset. Left: -1.00 +/- 0.00 Right: -0.91 +/- 0.28 > CCD 36 Offset. Left: 1.00 +/- 0.00 Right: 1.19 +/- 0.39 > CCD 46 Offset. Left: -1.00 +/- 0.00 Right: -1.22 +/- 0.41 > CCD 56 Offset. Left: -1.00 +/- 0.00 Right: -1.85 +/- 0.36 > CCD 60 Offset. Left: -10.15 +/- 0.36 Right: -10.00 +/- 0.00 > CCD 61 Offset. Left: -5.00 +/- 0.00 Right: -5.00 +/- 0.00 > CCD 62 Offset. Left: -9.64 +/- 0.48 Right: -9.60 +/- 0.49 > CCD 63 Offset. Left: -5.33 +/- 0.47 Right: -5.18 +/- 0.38 > CCD 64 Offset. Left: -7.58 +/- 0.55 Right: -7.50 +/- 0.56 > CCD 65 Offset. Left: 2.67 +/- 0.56 Right: 2.51 +/- 0.51 > CCD 71 Offset. Left: -21.00 +/- 0.00 Right: -21.00 +/- 0.00 > CCD 72 Offset. Left: -9.31 +/- 0.46 Right: -9.14 +/- 0.35 > CCD 73 Offset. Left: 5.93 +/- 0.56 Right: 5.94 +/- 0.52 > CCD 74 Offset. Left: -14.00 +/- 0.00 Right: -14.00 +/- 0.00 > CCD 75 Offset. Left: 3.00 +/- 0.20 Right: 3.00 +/- 0.00 > CCD 76 Offset. Left: -3.00 +/- 0.00 Right: 12.73 +/- 127.22 > CCD 81 Offset. Left: -9.28 +/- 0.45 Right: -9.03 +/- 0.17 > CCD 82 Offset. Left: -12.41 +/- 0.49 Right: -12.37 +/- 0.48 > CCD 83 Offset. Left: -14.94 +/- 0.37 Right: -14.91 +/- 0.57 > CCD 84 Offset. Left: -6.00 +/- 0.00 Right: -6.11 +/- 0.35 > CCD 85 Offset. Left: -6.22 +/- 0.44 Right: -6.27 +/- 0.47 > CCD 86 Offset. Left: -8.75 +/- 0.43 Right: -8.60 +/- 0.49 > CCD 90 Offset. Left: -5.69 +/- 0.46 Right: -6.00 +/- 0.00 > CCD 91 Offset. Left: -5.00 +/- 0.00 Right: -5.00 +/- 0.00 > CCD 92 Offset. Left: -6.00 +/- 0.00 Right: -6.11 +/- 0.31 > CCD 93 Offset. Left: -9.81 +/- 0.39 Right: -9.70 +/- 0.46 > CCD 94 Offset. Left: -8.00 +/- 0.00 Right: -8.00 +/- 0.00 > CCD 95 Offset. Left: -13.54 +/- 0.50 Right: -13.82 +/- 0.38 > im> > > im> checkFlat 5123 33 . > {42 WARN: leftGain } > {42 FAIL: } > > Open /skycat/imager/53389/5123-33-u-flat.gif/gif > Open /skycat/imager/53389/5123-33-g-flat.gif/gif > Open /skycat/imager/53389/5123-33-r-flat.gif/gif > Open /skycat/imager/53389/5123-33-i-flat.gif/gif > Open /skycat/imager/53389/5123-33-z-flat.gif/gif > 0 > im> > > Compressed data frames can be found in phoenix:/data/photo/optics/53389 > > > > 04:00Z We open with the imager to test the new iop. > > Run 5124 21N (ignore this run) > -------------- > Testing iop built on astrom v3_8c. skippy and focus are all good from > the beginning of the run. focusLoop runs fine. The seeing is bad > tonight and of course we have moooooooooon. After seeing that skippy > runs fine from both iop and astrom, we decided that the test is > completed. > > 04:50Z instChange to spectro > > Cart 9 Plate 1939 SDSS > ---------------------- > The first grabInst failed, so we dropped and regrabbed the > instrument. That worked. Maybe the server was trying to talk > to the camera when we tried to connect it. > > guideStars on gotoField. > > Mike declared v3_143_0a current. > > 3 science exposures finished the plate. > > 07:00Z Cart 4 Plate 1951 > -------------------------- > Mike tried to loadCart when TCC timed out and gave error message. > We don't know why TCC timed out, but it might be because > the rotator took very long time to get to 0. > The stack trace message from the time out is in the problem > section. > > Stars on gotoField. The seeing has improved. It is now about 1.3". > Finished in 3 exposures. postCalib recommendation came in for the > third exposure but it was too late since we have moved on by the > time the warning came in. > > 08:25Z Cart 5 Plate 1782 > ------------------------- > guide stars on gotoField. > We could not take the preCalib -- the flat lamp 3 is out! So Mike > found a spare lightbulb in the engineering trailor and he climbed up > the telescope to change it. Atsuko feels like she should practice > climbing telescopes since it did not look too easy. When he reached to > the flat field lamp, he found that he needed not only regular allen > renches, but very very very tiny screw driver (those that are used for > watches) as well to get the light bulb off. The tiny screws are holding > down the prongs coming out of hte base of the lightbulb. The task was > did not seem easily doable in the dark, standing on the side of the > telescope. Since the moon was setting, we decided to give up any more > spectroing and mounted the imager. > > 09:30Z Run 5125 20N > ----------------------- > Frame 18 Longitude -51.9 Seeing, skippy, focus good from here. > Frame 110 Longitude -38.2 Seeing becomes acceptable. > Frame 119 Longitude -36.8 Seeing becomes bad. :( The wind is from the east > and becoming stronger. > Frame 160 Longitude -30.7 Seeing is back to being GOOD! > Frame 211 Longitude -23.1 Seeing went bad again. Siiiigh. > 12:39Z Frame 315 Longitude -7.4 Twilight starts. > Frame 335 Longitude -6 ending the drift. The seeing never returned to being > good. > > > The first endNight attempt failed because of the failed archived data > from the first bias taken in the afternoon. The archiver was confused > probably by two initNight commands issued before and after this particular > bias was taken. While we waited for the unarchived frames to be archived, > we closed the telescope at 13:00Z. > > The second endNight started out fine and is running..... > > DIMM and its CCD are powered down. > > 13:20Z The imager server died. We restarted the server. But because of the > many gangs (?), it is taking a long time for the server to come up.... > > > ---=== IMAGING RUN SUMMARY ===--- > > Run Time Stripe Lambda Last Flavor Comments > Start End Begin End Frame > ------------------------------------------------------------------------- > 5121 23:46Z 00:19Z 100 O -175.77 -167.62 68 ignore > 5122 01:15Z 01:36Z 100 O -153.38 -148.24 48 bias > 5123 01:50Z 02:10Z 100 O -144.76 -139.68 48 calibration > 5124 04:33Z 04:53Z 21 N -62.93 -58.07 46 ignore > 5125 09:35Z 12:45Z 20 N -53.58 -5.73 333 science > ---=== IMAGING RUN DETAILS ===--- > > ---=== SKIPPY RESULTS ===--- > > Run Frame nFrames stars muErr muRms nuErr nuRms rot az el > --------------------------------------------------------------------------- > 5124 13 4 111 -7.100 0.159 -4.400 0.165 0.00271 111 50 > 5124 23 4 109 -7.800 0.128 -4.200 0.137 0.00326 111 50 > 5124 30 1 28 -8.000 0.147 -4.100 0.128 0.00266 110 50 > > 5125 17 4 87 -7.300 0.128 3.600 0.116 -0.00085 242 59 > > 5125 69 4 68 -7.500 0.116 4.000 0.137 0.00010 246 60 > 5125 121 4 59 -9.500 0.113 3.900 0.127 0.00025 250 62 > 5125 175 4 48 -7.600 0.127 4.100 0.124 0.00068 253 63 > 5125 228 4 51 -9.400 0.156 4.300 0.149 0.00119 255 64 > 5125 279 4 64 -9.300 0.185 3.800 0.155 0.00184 257 65 > > ---=== LTMATCH RESULTS ===--- > > Run Field nFields alt az nGood rowMean rowSig colMean colSig rot > ------------------------------------------------------------------------ > 5124 28 1 51 70 38 -1.068 0.152 0.866 0.411 -0.00291 > 5124 28 1 51 70 44 -1.154 0.210 0.878 0.351 -0.00295 > 5124 28 1 51 70 41 -1.129 0.172 0.865 0.418 -0.00291 > 5124 28 1 51 70 40 -1.096 0.299 0.834 0.373 -0.00280 > 5124 28 1 51 70 35 -1.069 0.346 0.250 0.265 -0.00084 > 5125 45 1 60 295 16 -0.894 0.208 0.117 0.190 -0.00039 > 5125 45 1 60 295 23 -1.030 0.098 -0.018 0.123 0.00006 > 5125 45 1 60 295 19 -0.878 0.147 0.041 0.200 -0.00014 > 5125 45 1 60 295 22 -0.883 0.138 0.229 0.273 -0.00077 > 5125 45 1 60 295 23 -0.563 0.119 0.258 0.217 -0.00087 > 5125 79 1 61 293 19 -0.676 0.208 -0.014 0.277 0.00005 > 5125 79 1 61 293 20 -0.641 0.184 0.109 0.199 -0.00036 > 5125 79 1 61 293 26 -0.519 0.164 0.045 0.248 -0.00015 > 5125 79 1 61 293 20 -0.449 0.171 -0.149 0.206 0.00050 > 5125 79 1 61 293 21 -0.372 0.156 -0.205 0.276 0.00069 > 5125 98 1 61 291 9 -0.907 0.171 -0.411 0.076 0.00138 > 5125 98 1 61 291 19 -0.801 0.186 -0.502 0.148 0.00169 > 5125 98 1 61 291 16 -0.821 0.250 -0.332 0.161 0.00112 > 5125 98 1 61 291 17 -0.589 0.270 -0.373 0.183 0.00125 > 5125 98 1 61 291 20 -0.608 0.273 -0.277 0.163 0.00093 > 5125 133 1 62 289 11 -1.297 0.207 -0.393 0.232 0.00132 > 5125 133 1 62 289 16 -1.127 0.364 -0.421 0.260 0.00142 > 5125 133 1 62 289 12 -0.996 0.400 -0.452 0.236 0.00152 > 5125 133 1 62 289 9 -1.097 0.331 -0.565 0.326 0.00190 > 5125 133 1 62 289 8 -1.068 0.378 -0.628 0.276 0.00211 > 5125 149 1 63 288 15 -1.055 0.236 -0.221 0.266 0.00074 > 5125 149 1 63 288 16 -1.070 0.314 -0.263 0.135 0.00089 > 5125 149 1 63 288 13 -1.001 0.203 -0.313 0.189 0.00105 > 5125 149 1 63 288 16 -0.871 0.202 -0.556 0.228 0.00187 > 5125 149 1 63 288 15 -0.714 0.289 -0.648 0.153 0.00218 > 5125 184 1 63 286 13 -1.126 0.210 0.053 0.203 -0.00018 > 5125 184 1 63 286 16 -1.097 0.160 0.079 0.201 -0.00027 > 5125 184 1 63 286 17 -0.978 0.140 -0.194 0.190 0.00065 > 5125 184 1 63 286 11 -1.132 0.327 0.030 0.126 -0.00010 > 5125 184 1 63 286 23 -1.034 0.212 -0.291 0.204 0.00098 > 5125 203 1 64 285 11 -0.619 0.116 -0.424 0.107 0.00143 > 5125 203 1 64 285 14 -0.530 0.144 -0.498 0.105 0.00167 > 5125 203 1 64 285 16 -0.558 0.220 -0.508 0.289 0.00171 > 5125 203 1 64 285 14 -0.584 0.195 -0.481 0.178 0.00162 > 5125 203 1 64 285 14 -0.408 0.194 -0.408 0.247 0.00137 > 5125 238 1 65 284 8 -0.667 0.300 -0.416 0.095 0.00140 > 5125 238 1 65 284 8 -0.399 0.301 -0.522 0.061 0.00176 > 5125 238 1 65 284 15 -0.463 0.247 -0.641 0.170 0.00216 > 5125 238 1 65 284 10 -0.420 0.241 -0.649 0.137 0.00218 > 5125 238 1 65 284 12 -0.350 0.184 -0.544 0.197 0.00183 > 5125 255 1 65 283 10 -1.140 0.306 -0.582 0.232 0.00196 > 5125 255 1 65 283 6 -1.308 0.217 -0.899 0.280 0.00302 > 5125 255 1 65 283 9 -0.858 0.363 -0.603 0.208 0.00203 > 5125 255 1 65 283 19 -0.770 0.309 -0.733 0.193 0.00246 > 5125 255 1 65 283 5 -0.579 0.130 -0.763 0.191 0.00257 > 5125 291 1 66 283 5 -0.689 0.345 -1.465 0.487 0.00493 > 5125 291 1 66 283 11 -0.324 0.281 -1.257 0.250 0.00423 > 5125 291 1 66 283 11 -0.212 0.316 -1.195 0.238 0.00402 > 5125 291 1 66 283 4 -0.278 0.252 -1.152 0.205 0.00387 > 5125 291 1 66 283 13 -0.449 0.255 -1.281 0.302 0.00431 > 5125 307 1 66 282 13 -0.253 0.237 -0.621 0.192 0.00209 > 5125 307 1 66 282 12 -0.304 0.287 -0.843 0.191 0.00284 > 5125 307 1 66 282 10 -0.310 0.266 -0.840 0.144 0.00282 > 5125 307 1 66 282 5 -0.279 0.254 -0.943 0.221 0.00317 > 5125 307 1 66 282 9 -0.195 0.250 -0.895 0.230 0.00301 > ---=== SPECTROSCOPY DATA SUMMARY ===--- > > Summary Checked (y/n):y > QA Procedures Done (y/n):y > UT Exp Time flavor comment (S/N)^2 totals > ========================================== b1 r1 b2 r2 > ----- sequence 30645, plate -9999 ------- > 22:29 30645 0.0 bias > ----- sequence 30646, plate -9999 ------- > 00:45 30646 0.0 bias > 01:19 30647 0.0 bias > 01:33 30648 0.0 bias > ----- sequence 30649, plate -9999 ------- > 01:47 30649 0.0 bias > 05:13 30650 0.0 bias > ----- sequence 30650, plate 1939 ------- > 05:29 30651 10.0 flat > 05:32 30652 2.0 arc > > 05:56 30653 1200.1 target > > 06:24 30654 1500.1 target > 06:52 30655 1500.1 target > > ----- sequence 30656, plate 1951 ------- > 07:16 30656 10.0 flat > 07:18 30657 2.0 arc > > 07:40 30658 1000.1 target > 08:00 30659 1000.1 target > 08:19 30660 1000.1 target > > ---=== TELESCOPE OFFSETS AND SCALE I ===--- > > Time Instrument Az Alt Rot Scale > pos offset pos offset pos offset > ------------------------------------------------------------------------------ > 05:37Z 9 1939 97.16 0.0002 51.59 0.0028 252.98 0.0062 1.000280 > 07:20Z 4 1951 103.64 0.0002 66.01 0.0028 -92.79 0.0062 1.000170 > > > 09:46Z imager 297.30 0.0000 59.27 0.0000 19.07 0.0000 1.000000 > > ---=== TELESCOPE OFFSETS AND SCALE II ===--- > > ---=== DATA TAPE SUMMARY ===--- > > Goes: JL8284-8289, 8296 > Stays: JL8290-8295, 8297 > > ---=== FOCUS LOG ===--- > > setmir piston Temp Wind > Time Inst scale M1 M2 Foc Az Alt (C) MPH Dir filt fwhm > ------------------------------------------------------------------------------ > 05:37Z 9 0 1.00028 -2764 -1037 75 97 51.6 3.2 10 2 gdr 1.7 > > > 07:20Z 4 1951 1.00017 -1678 -201 50 104 66.0 2.9 17 2 gdr 1.3 > > 09:46Z imager 1.00000 0 -325 -214 297 59.3 3.5 20 15 23 1.18 > > ---=== WEATHER LOG ===--- > > Wind > Time Temp F Dewp F MPH Direction Dust DIMM Sky > 22:20Z 40 14 14 346 (NNW) -9999 - > 22:52Z 39 15 7 291 (WNW) -9999 - > 23:24Z 38 14 6 12 (NNE) -9999 - > 00:09Z 37 14 7 354 (NNW) -9999 - > 00:45Z 36 16 3 1 (N) -9999 - > 01:29Z 35 17 2 335 (NNW) -9999 - > 02:01Z 36 17 10 356 (NNW) -9999 - > 02:33Z 37 12 6 11 (N) -9999 - > 03:05Z 40 13 8 27 (NNE) -9999 - > 03:38Z 39 12 8 328 (NNW) -9999 - > 04:10Z 39 12 11 7 (N) -9999 - > 04:46Z 38 14 11 1 (N) -9999 - > 05:19Z 38 15 14 2 (N) -9999 - > 05:53Z 37 15 9 359 (NNW) -9999 - > 06:23Z 37 15 12 8 (N) -9999 - > 06:56Z 38 16 13 13 (NNE) -9999 - > 07:27Z 37 17 5 19 (NNE) -9999 - > 08:00Z 37 17 11 6 (N) -9999 - > 08:31Z 38 17 1 97 (E) -9999 - > 09:03Z 37 17 4 12 (NNE) -9999 - > 09:35Z 38 17 10 5 (N) -9999 - > 10:07Z 38 17 8 39 (NE) -9999 - > 10:39Z 37 17 13 5 (N) -9999 - > 11:11Z 37 14 8 6 (N) -9999 - > 11:42Z 37 12 15 11 (N) -9999 - > 12:12Z 38 8 12 14 (NNE) -9999 - > 12:44Z 38 5 13 28 (NNE) -9999 - > 13:15Z 37 3 10 29 (NNE) -9999 - > 13:45Z 38 4 14 34 (NE) -9999 - > ---=== TELESCOPE STATUS ===--- > > 23:30Z Door cracked, louver opened, fans on. > 04:00Z Open. > 13:00Z Closed and fans off. > > Telescope is at stow with imager mounted. Spectro autofill connected. > Since the weather is good, we will leave it for the day crew to > put the imager away. We did issue the stop/startfillseq after we put the > enclosure on. > > No interlock bypassed. > ---=== SOFTWARE USED ===--- > > IOP/SOP: v3_143_0a > Watcher: 3_20_0 > MCP: v5_26_0 > TPM: tpm_v2_46_0 > AstroDa: v14_47 > TCC: TCC 2.7.2.1 August 6 2004 > sdssProcedures: v1_97 > SoS: v4_10_7 > hoggPT: v1_6_9 > plate-mapper: v4_3_1 > > > ---=== MIRROR NUMBERS ===--- > > PRIMARY: > -------- > Scale: 1.000000 > MIGS TONIGHT NOMINAL > Axial A 0.5800 0.5660 > Axial B 0.5790 0.5840 > Axial C 0.9460 0.9440 > Trans D -8.2040 -8.1940 > Lateral E 9.9822 9.9695 > Lateral F 11.5951 11.5697 > GALILS > Commanded: 4300. -1900. 2850. -13300. -7600. -7650. > Actual: 4300. -1900. 2850. -13300. -7600. -7650. > SETMIR VALUES > PriDesOrient: 0.00 4.57 1.18 64.25 -249.76 > PriOrient: 0.00 4.56 0.88 65.00 -249.58 > SECONDARY: > ---------- > Focus: 0.00 > Air Temp.: 4.4 > Alt.: 30.357102 > MIGS TONIGHT NOMINAL > Axial A 1.5730 1.5710 > Axial B 1.0500 1.0490 > Axial C 1.1630 1.1620 > Trans D -0.2100 -0.2070 > GALILS > Commanded: 1619208. 1605797. 1528550. -13800. -9950. > Actual: 1619200. 1604950. 1528550. -13800. -9950. > SETMIR VALUES > SecDesOrient: 1257.00 27.97 -10.00 -90.00 257.89 > SecOrient: 1257.22 28.17 -9.79 -89.80 257.37 > ---=== PROBLEMS IN DETAIL ===--- > > TCC time out stack trace message > ------------------------------------- > timed out waiting for the TCC to complete command track 121,90 mount /rotangle=0 > /rottype=mount > while executing > "error $errorMessage" > invoked from within > "if {[getclock] > $startTime + $timeout} { > set errorMessage "timed out waiting for the TCC to complete com > mand $tccCommand" > murmur "tccPutAndWait ..." > invoked from within > "if {!$TCCCommandComplete($commandIndex)} { > if {[getclock] > $startTime + $timeout} { > set errorMessage "timed out waiting for the TCC to comple ..." > ("while" body line 4) > invoked from within > "while {!$TCCCommandComplete($commandIndex)} { > listenerToTCC > murmur "tccPutAndWait finished trying listenerToTCC" > if {!$TCCCommandComplete($c ..." > (procedure "tccPutAndWait" line 17) > invoked from within > "tccPutAndWait "track 121,90 mount /rotangle=$rot_dest /rottype=mount"" > (procedure "instChange" line 109) > invoked from within > "instChange -noInit" > ("eval" body line 1) > invoked from within > "eval "instChange $option"" > (procedure "GUIinstChange" line 41) > invoked from within > "GUIinstChange $GUIinstChangeOption" > invoked from within > ".sgui.instchange.go invoke" > ("uplevel" body line 1) > invoked from within > "uplevel #0 [list $w invoke]" > invoked from within > "if {($w == $tkPriv(window)) > && ([$w cget -state] != "disabled")} { > uplevel #0 [list $w invoke] > }" > invoked from within > "if {$w == $tkPriv(buttonWindow)} { > set tkPriv(buttonWindow) "" > $w config -relief $tkPriv(relief) > if {($w == $tkPriv(window)) > && ([$w cget -state] ..." > (procedure "tkButtonUp" line 3) > invoked from within > "tkButtonUp .sgui.instchange.go" > (command bound to event) > > > Watcher errors > ----------------------------- > > We saw several altitude wind screen touches when going up. > > tracking (Excessive Az Tracking Error:: 2005-01-19 08:24:44Z) > > > > > DSS DSS DSS DSS DSS Digital Sky Survey DSS DSS DSS DSS DSS DSS > DSS *** The information posted to SDSS mailing lists is proprietary *** > DSS This is message 2318 in the sdss-25mlog archive, URL > DSS http://www.astro.princeton.edu:81/sdss-25mlog/msg.2318.html > DSS The index is at http://www.astro.princeton.edu:81/sdss-25mlog/INDEX.html > DSS To join/leave the list, go to > DSS http://www.astro.princeton.edu:81/cgi-bin/mailinglists.pl/show_subscription?list=sdss-25mlog > DSS To post a message, mail it to sdss-25mlog@astro.princeton.edu > DSS > DSS DSS DSS DSS DSS DSS DSS DSS DSS DSS DSS DSS DSS DSS DSS DSS >