Date: Wed, 19 Jun 2002 11:30:23 GMT From: neilsen@apo.nmsu.edu (Eric Neilsen) Subject: 2.5m obslog 20020618 (MJD 52444) APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Tuesday June 18, 2002 (MJD 52444) ---=== OBSERVING TEAM ===--- Eric Neilsen Jurek Krzesinski Atsuko Kleinman (day) Scot Kleinman Dan Long (both in person and by phone) ---=== OBSERVING PLAN ===--- Shake, including guider tests for Jim, TCC tests, and IOP and SOP tests. ---=== OBSERVING SUMMARY ===--- It appears that the imager deware is filling about once every 2 hours or more. PR's 3850, 3825, 2718, 3011, 3526, 3605, 3879, 3528, 3710 closed. PR's 3761 and 3171 need more work, and prevent the new IOP from being declared current. ---=== OBSERVING LOG ===--- Atsuko (on day shift) reports that she had to reset the slip detection. Did the day crew do something to trip it? On starting logTool, we find software sections include version numbers for mapper, SOS, and higgPT; the fix for PR 3825 seems to have worked. Before opening, we start shaking IOP PR 2796 and SOP PR 3526. SOP PR 3526, the recovery procedure for a failed endStare (perhaps because SOP died before the end of an exposure) works. Just before 03:35Z, Jurek ran a focus sweep. The same guide image (gimg0902.fit) was used repeatedly. A second attempt at a focus sweep worked properly. See the problem section. 04:38Z begin test of PR 3011, informTCCOfGProbes A minor bug fix in SOP was needed to make it work consistantly. We test whether the TCC got the correct information, we used TRACK /PTERR to put fk5 stars in guide fibers. We changed which fiber to put the fk5 star in using, for example (in the TCC): SET BLOCK INST PTERRPROBE 11 ^Z to put the fk5 in fiber ll. This worked to get fk5 stars in fibers 10 and 11. When we attempted this with other fibers, we got the following error in the TCC: 0 0 I GCamReply='scan region too small for the given predicted FWHM' I speculate that this means that the TCC (or perhaps the guider mac) think the small fibers are too small to guide with. Given that we go the fk5 in fiber 10 and in fiber 11, I believe that we are sending the correct information to the TCC, and the informTCCOfGProbes works. We did further testing of PR 3605, tccPutAndWait sometimes missing the end of TCC commands, and this led to a diagnosis and solution of the problem. Smear should not be modified to use tccPutAndWait again; this should be ready for the July shakedown. PR 3528 SOPGUI - goStare expects integer 0 not 0.0 in Exp window... Scot fixed that. A, D, R offsets also go to zeros after executing. PR 3879: SOP's stubborn mechanicals communication... Based on examination of the murmur log during tonights spectro observations, this fix seems to have worked. PR 3002: please murmur the message that beginData has failed... I have tested this by redefining beginData: proc beginData { args } { error "this is a sample error from a bad beginData"} and running goStare -init -bias; it seems to work. The error goes to the SOP terminal and murmur log: 2002-06-19 06:52:36Z sdsshost IDA 142225 TEXTONLY beginData has failed: this is a sample error from a bad beginData Connie, is this what you want? Jim's guider test request: Plate 814 on the telescope: alt 39 deg. The sky level is high, since we are close to the Moon. -guider camera gain set to ID 6 (gain 5), First sets of flats, integr time 5 second: number of counts below 3000 (so it's 3/4 of the pixel capacity). see frames: 0045 - 0050 Then integration time was decreassed to get counts somewhere in the middle: integration time 3.5 sec (we've got number of counts about 2000). see frames: 0053 - 0059 Since Jim wants high S/N for flat field and not saturated frames, than we set the integration time to 5 sec. and took 10 flat field exposures: frames: 0061 - 0071 -> flat field frames next 10 frames are normal guider frames with sky, and integration time: 20 sec frames: 0083 - 0093 -> sky frames Then with the same integration time (20 sec) we took 10 star exposures: frames: 0100 - 0110 -> star frames (no star image was saturated). After that we took again 10 flat field frames of 5 sec integration time: frames: 0115 - 0125 -> flat field frames To get dark frames of 20 sec exposure time, we moved the telescope into instrument change position, removed the cartridge and closed the cartridge doors, and then took 10 dark frames using standard gcam command: frames: 0127 - 0137 All data were copied into landru /home/jeg/Data/52444 directory. at 08:35Z, we put the imager on. There were many moths on the corrector. PR 1296: fix autostretch code so you can see better Command line commands to set the scale manually were tested, as were commands to set the scale based on old gang files. Looking at real sky, with sqrt scaling, it looks like we want scdDynamicThresh of -20 and scdReduceSize of 512 for a good view of both sky noise and objects. This does not produce the prettiest images, but it does give a reasonable view both of sky noise and objects. The commands tested mostly work as desired; the only exception is the command to return to the default scaling, which places the zeropoint relative to the sky a little above the actual default, resulting in some sky pixels falling beneath the threshhold, and showing up blue. PR 3850, problems with TCC track/stop and rot/stop We don't normally use these commands, but they seem to work as described in Russell's shake request. PR 2718, a new tool for easy log excerpt extracting Jurek seems happy with how it works, but is confused by some of the parameters in the help string. PR 3762, PR 3171: modifications to astrom related procs to add alt and az to ltMatch tables, and to keep them from running automatically when unnecessary. These changes broke something, and was not fixed during the night; do not use iop v3_80_0 through v3_80_5 to do imageing. ---=== IMAGING RUN SUMMARY ===--- Run Time Stripe Lambda Last Flavor Comments Start End Begin End Frame ------------------------------------------------------------------------- 3240 01:19Z 01:26Z 100 O -3.78 -2.07 25 bias 3241 01:35Z 01:41Z 100 O 0.23 1.64 22 engineering 3242 01:46Z 01:58Z 100 O 2.90 6.03 35 engineering 3243 03:36Z 03:49Z 100 O 30.38 33.81 34 bias 3244 08:24Z 08:27Z 100 O 102.69 103.51 19 bias 3245 08:29Z 08:33Z 100 O 104.01 105.04 21 engineering 3246 08:36Z 08:50Z 43 S 30.92 34.48 38 engineering 3247 08:52Z 09:06Z 43 S 34.95 38.52 38 engineering 3248 09:08Z 09:40Z 43 S 38.94 47.07 68 science ---=== SKIPPY RESULTS ===--- Run Frame nFrames stars muErr muRms nuErr nuRms rot az el --------------------------------------------------------------------------- 3248 13 1 81 -3.900 0.402 7.000 0.381 -0.02054 316 60 3248 15 4 23 -3.700 0.196 6.900 0.120 -0.01987 315 60 3248 15 4 117 -3.700 0.354 6.900 0.119 -0.01950 314 60 ---=== SPECTROSCOPY DATA SUMMARY ===--- UT Exp Time flavor comment (S/N)^2 totals ========================================== b1 r1 b2 r2 ----- sequence 15726, plate -9999 ------- 01:22 15726 0.0 bias ----- sequence 15727, plate 915 ------- 01:34 15727 10.0 engineering ----- sequence 15728, plate -9999 ------- 01:54 15728 10.0 bias 01:58 15729 60.0 bias 02:07 15730 61.0 ignore ----- sequence 15731, plate 915 ------- 02:13 15731 61.0 engineering 02:21 15732 31.0 engineering ----- sequence 15733, plate -9999 ------- 03:14 15733 0.0 bias ----- sequence 15733, plate 915 ------- 04:01 15734 10.0 flat 04:03 15735 2.0 arc 04:26 15736 1200.0 target 2.1 3.0 2.5 2.3 Note that SoS complains about the sky on this exposure. We are sending it anyway in the hope it can ba salvaged, otherwise we loose the plate. ----- sequence 15737, plate -9999 ------- 06:58 15737 0.0 bias 07:07 15738 0.0 bias ---=== DATA TAPE SUMMARY ===--- Goes: JL5431 Stays: JL5432 ---=== FOCUS LOG ===--- setmir piston Temp Wind Time Inst scale M1 M2 Foc Az Alt (C) MPH Dir filt fwhm ------------------------------------------------------------------------------ 06:38Z 2 814 1.00014 -1381 -446 -430 222 71.7 19.6 12 303 ---=== WEATHER LOG ===--- Wind Time Temp F Dewp F MPH Direction Dust DIMM Sky 00:14Z 77 26 13 312 (NW) 508 - clear all night 00:47Z 76 24 8 265 (W) 381 - 01:23Z 74 23 10 267 (W) 552 - 01:55Z 70 18 13 243 (WSW) 707 - 02:27Z 67 15 7 254 (WSW) 641 - 03:00Z 66 15 13 240 (WSW) 804 - 03:32Z 65 14 11 191 (S) 657 - 04:04Z 67 17 12 196 (SSW) 731 - 04:37Z 67 16 10 240 (WSW) 712 - 05:09Z 67 16 8 232 (SW) 544 - 05:41Z 68 16 9 269 (W) 512 - 06:12Z 67 15 8 271 (W) 479 - 06:46Z 66 16 8 286 (WNW) 549 - 07:18Z 66 15 10 303 (WNW) 496 - 07:50Z 66 15 11 319 (NW) 466 - 08:22Z 65 15 8 305 (NW) 514 - 08:55Z 65 14 10 322 (NW) 489 - 09:27Z 64 12 7 341 (NNW) 470 - 09:59Z 65 14 9 327 (NNW) 512 - 10:32Z 64 14 10 301 (WNW) 446 - 11:04Z 64 14 14 306 (NW) 442 - ---=== TELESCOPE STATUS ===--- 02:15Z Enclosure open Telescope parked at 30 degrees, spectro autofill connected. at 10:33Z Spectrograph dewar: Dewar wt. 213 lb Imager dewar: Dewar wt. 134 lb ---=== SOFTWARE USED ===--- IOP/SOP: v3_80_0 through v3_80_5 Watcher: v2_18_0 MCP: v5_13_0 TPM: tpm_v2_12_0 AstroDa: v14_47 TCC: 2.6.5 sdssProcedures: v1_47 SoS: v4_9_10 hoggPT: v1_5_8 plate-mapper: v4_1_0 ---=== MIRROR NUMBERS ===--- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A 0.0880 0.0860 Axial B 0.8060 0.8050 Axial C 0.0760 0.0760 Trans D -1.5290 -1.5230 Lateral E 1.8390 1.8300 Lateral F 0.0000 0.0000 GALILS Commanded: 5400. -3700. 900. -200. 31550. 30650. Actual: 5400. -3700. 900. -200. 31550. 30650. SETMIR VALUES PriDesOrient: 0.00 -11.80 23.00 1256.90 642.10 PriOrient: 0.00 -12.16 22.81 1257.41 642.19 SECONDARY: ---------- Focus: 0.00 Air Temp.: 19.0 Alt.: 29.999997 MIGS TONIGHT NOMINAL Axial A 1.5390 1.5380 Axial B 1.2090 1.2080 Axial C 1.1510 1.1510 Trans D -0.6160 -0.6200 GALILS Commanded: 1604965. 1575372. 1570843. -12000. -11350. Actual: 1604800. 1575850. 1570850. -12000. -11350. SETMIR VALUES SecDesOrient: 1257.00 5.00 -10.00 0.00 165.44 SecOrient: 1256.92 4.90 -10.17 -0.36 165.41 ---=== PROBLEMS IN DETAIL ===--- guiderFocus problem: Problems with a focus loop, it happened, that all measurements of fwhm were taken on a single image (but the first one). sp1> SOPGUI: guiderFocus -300.0 7 50.0 10.0 2.0 Setting focus to -450.0 Waiting for secondary to arrive Waiting 12500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -450.0, working on guider image /data/spectro/guider/gimg0901.fits 10 ( -0.64, 0.49) +- (0.01, 0.01) 2388 1853 OK 1 1 ( 0.10, 1.61) +- (0.01, 0.01) 3600 2225 Too close to edge 1 3 ( -0.08, -1.17) +- (0.01, 0.01) 1059 906 OK 1 5 ( 2.41, 0.85) +- (0.01, 0.01) 2049 1171 Too close to edge 1 7 ( 2.00, -2.84) +- (0.01, 0.01) 2709 1343 Too close to edge 1 9 ( 0.33, -0.81) +- (0.01, 0.01) 1828 1545 OK 1 11 ( 0.87, 0.64) +- (0.01, 0.01) 3474 2025 Too close to edge 1 2 ( 0.32, 0.22) +- (0.00, 0.00) 3689 2684 OK 1 4 ( -0.80, -0.49) +- (0.00, 0.00) 3797 2439 Too close to edge 1 6 ( 1.79, 1.03) +- (0.01, 0.01) 1803 1354 OK 1 8 ( 3.56, 0.35) +- (0.01, 0.01) 1744 783 Too close to edge 1 Setting focus to -400.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -400.0, working on guider image /data/spectro/guider/gimg0902.fits 10 ( -1.15, 1.19) +- (0.01, 0.01) 2460 1823 OK 1 1 ( -0.32, 1.31) +- (0.00, 0.00) 3511 2362 Too close to edge 1 3 ( -1.11, -0.91) +- (0.01, 0.01) 1108 959 OK 1 5 ( 3.06, 0.54) +- (0.01, 0.01) 2074 1219 OK 1 7 ( 2.31, -3.20) +- (0.01, 0.01) 2667 1293 Too close to edge 1 9 ( 0.17, -1.72) +- (0.01, 0.01) 1890 1532 OK 1 11 ( 0.03, 1.39) +- (0.01, 0.01) 3504 2095 Too many iterations 1 2 ( -0.05, 0.76) +- (0.00, 0.00) 3726 2884 OK 1 4 ( -0.97, 0.40) +- (0.00, 0.00) 3777 2661 OK 1 6 ( 1.55, 1.74) +- (0.01, 0.01) 1872 1459 OK 1 8 ( 3.70, 0.67) +- (0.01, 0.01) 1781 882 Too close to edge 1 Setting focus to -350.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -350.0, working on guider image /data/spectro/guider/gimg0902.fits 10 ( -1.15, 1.19) +- (0.01, 0.01) 2460 1823 OK 1 1 ( -0.32, 1.31) +- (0.00, 0.00) 3511 2362 Too close to edge 1 3 ( -1.11, -0.91) +- (0.01, 0.01) 1108 959 OK 1 5 ( 3.06, 0.54) +- (0.01, 0.01) 2074 1219 OK 1 7 ( 2.31, -3.20) +- (0.01, 0.01) 2667 1293 Too close to edge 1 9 ( 0.17, -1.72) +- (0.01, 0.01) 1890 1532 OK 1 11 ( 0.03, 1.39) +- (0.01, 0.01) 3504 2095 Too many iterations 1 2 ( -0.05, 0.76) +- (0.00, 0.00) 3726 2884 OK 1 4 ( -0.97, 0.40) +- (0.00, 0.00) 3777 2661 OK 1 6 ( 1.55, 1.74) +- (0.01, 0.01) 1872 1459 OK 1 8 ( 3.70, 0.67) +- (0.01, 0.01) 1781 882 Too close to edge 1 Setting focus to -300.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -300.0, working on guider image /data/spectro/guider/gimg0902.fits 10 ( -1.15, 1.19) +- (0.01, 0.01) 2460 1823 OK 1 1 ( -0.32, 1.31) +- (0.00, 0.00) 3511 2362 Too close to edge 1 3 ( -1.11, -0.91) +- (0.01, 0.01) 1108 959 OK 1 5 ( 3.06, 0.54) +- (0.01, 0.01) 2074 1219 OK 1 7 ( 2.31, -3.20) +- (0.01, 0.01) 2667 1293 Too close to edge 1 9 ( 0.17, -1.72) +- (0.01, 0.01) 1890 1532 OK 1 11 ( 0.03, 1.39) +- (0.01, 0.01) 3504 2095 Too many iterations 1 2 ( -0.05, 0.76) +- (0.00, 0.00) 3726 2884 OK 1 4 ( -0.97, 0.40) +- (0.00, 0.00) 3777 2661 OK 1 6 ( 1.55, 1.74) +- (0.01, 0.01) 1872 1459 OK 1 8 ( 3.70, 0.67) +- (0.01, 0.01) 1781 882 Too close to edge 1 Setting focus to -250.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -250.0, working on guider image /data/spectro/guider/gimg0902.fits 10 ( -1.15, 1.19) +- (0.01, 0.01) 2460 1823 OK 1 1 ( -0.32, 1.31) +- (0.00, 0.00) 3511 2362 Too close to edge 1 3 ( -1.11, -0.91) +- (0.01, 0.01) 1108 959 OK 1 5 ( 3.06, 0.54) +- (0.01, 0.01) 2074 1219 OK 1 7 ( 2.31, -3.20) +- (0.01, 0.01) 2667 1293 Too close to edge 1 9 ( 0.17, -1.72) +- (0.01, 0.01) 1890 1532 OK 1 11 ( 0.03, 1.39) +- (0.01, 0.01) 3504 2095 Too many iterations 1 2 ( -0.05, 0.76) +- (0.00, 0.00) 3726 2884 OK 1 4 ( -0.97, 0.40) +- (0.00, 0.00) 3777 2661 OK 1 6 ( 1.55, 1.74) +- (0.01, 0.01) 1872 1459 OK 1 8 ( 3.70, 0.67) +- (0.01, 0.01) 1781 882 Too close to edge 1 Setting focus to -200.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -200.0, working on guider image /data/spectro/guider/gimg0902.fits 10 ( -1.15, 1.19) +- (0.01, 0.01) 2460 1823 OK 1 1 ( -0.32, 1.31) +- (0.00, 0.00) 3511 2362 Too close to edge 1 3 ( -1.11, -0.91) +- (0.01, 0.01) 1108 959 OK 1 5 ( 3.06, 0.54) +- (0.01, 0.01) 2074 1219 OK 1 7 ( 2.31, -3.20) +- (0.01, 0.01) 2667 1293 Too close to edge 1 9 ( 0.17, -1.72) +- (0.01, 0.01) 1890 1532 OK 1 11 ( 0.03, 1.39) +- (0.01, 0.01) 3504 2095 Too many iterations 1 2 ( -0.05, 0.76) +- (0.00, 0.00) 3726 2884 OK 1 4 ( -0.97, 0.40) +- (0.00, 0.00) 3777 2661 OK 1 6 ( 1.55, 1.74) +- (0.01, 0.01) 1872 1459 OK 1 8 ( 3.70, 0.67) +- (0.01, 0.01) 1781 882 Too close to edge 1 Setting focus to -150.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -150.0, working on guider image /data/spectro/guider/gimg0902.fits 10 ( -1.15, 1.19) +- (0.01, 0.01) 2460 1823 OK 1 1 ( -0.32, 1.31) +- (0.00, 0.00) 3511 2362 Too close to edge 1 3 ( -1.11, -0.91) +- (0.01, 0.01) 1108 959 OK 1 5 ( 3.06, 0.54) +- (0.01, 0.01) 2074 1219 OK 1 7 ( 2.31, -3.20) +- (0.01, 0.01) 2667 1293 Too close to edge 1 9 ( 0.17, -1.72) +- (0.01, 0.01) 1890 1532 OK 1 11 ( 0.03, 1.39) +- (0.01, 0.01) 3504 2095 Too many iterations 1 2 ( -0.05, 0.76) +- (0.00, 0.00) 3726 2884 OK 1 4 ( -0.97, 0.40) +- (0.00, 0.00) 3777 2661 OK 1 6 ( 1.55, 1.74) +- (0.01, 0.01) 1872 1459 OK 1 8 ( 3.70, 0.67) +- (0.01, 0.01) 1781 882 Too close to edge 1 sp1> ---------------------------------------------------------------------------- The next guider focus loop went properly - we don't know what happened. sp1> SOPGUI: guiderFocus -300.0 7 50.0 10.0 2.0 Setting focus to -450.0 Waiting for secondary to arrive Waiting 12500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -450.0, working on guider image /data/spectro/guider/gimg0903.fits 10 ( -0.90, 0.66) +- (0.01, 0.01) 2452 1832 OK 1 1 ( -0.10, 2.01) +- (0.00, 0.00) 3535 2264 Too close to edge 1 3 ( -0.49, -1.12) +- (0.01, 0.01) 1126 1008 OK 1 5 ( 2.72, 0.72) +- (0.01, 0.01) 2058 1271 OK 1 7 ( 1.98, -3.14) +- (0.01, 0.01) 2695 1322 Too close to edge 1 9 ( 0.47, -1.28) +- (0.01, 0.01) 1837 1549 OK 1 11 ( 0.68, 1.20) +- (0.01, 0.01) 3396 2038 Too many iterations 1 2 ( 0.05, 0.87) +- (0.00, 0.00) 3720 2846 OK 1 4 ( -0.79, 0.14) +- (0.00, 0.00) 3820 2709 OK 1 6 ( 1.71, 1.68) +- (0.01, 0.01) 1875 1462 OK 1 8 ( 4.16, 0.08) +- (0.01, 0.01) 1663 796 OK 1 Setting focus to -400.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -400.0, working on guider image /data/spectro/guider/gimg0904.fits 10 ( -0.55, 0.98) +- (0.01, 0.01) 2513 1420 OK 1 1 ( -0.14, 2.14) +- (0.01, 0.01) 3788 1927 Too close to edge 1 3 ( -0.95, -0.54) +- (0.01, 0.01) 903 714 OK 1 5 ( 3.40, 0.34) +- (0.01, 0.01) 2062 972 Too close to edge 1 7 ( 1.70, -2.62) +- (0.01, 0.01) 2923 1218 Too close to edge 1 9 ( 0.40, -1.59) +- (0.01, 0.01) 1651 1223 OK 1 11 ( 0.91, 1.47) +- (0.01, 0.01) 3772 1658 Too close to edge 1 2 ( -0.14, 1.34) +- (0.01, 0.01) 3823 2305 OK 1 4 ( -0.84, 1.00) +- (0.00, 0.00) 3843 2355 Too close to edge 1 6 ( 1.22, 2.17) +- (0.01, 0.01) 1645 1121 OK 1 8 ( 3.53, -0.14) +- (0.01, 0.01) 1561 804 OK 1 Setting focus to -350.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -350.0, working on guider image /data/spectro/guider/gimg0905.fits 10 ( 2.44, 2.33) +- (0.01, 0.01) 2486 626 Too close to edge 1 1 ( 0.12, 3.79) +- (0.01, 0.01) 8071 1191 Too close to edge 1 3 ( -0.58, 2.31) +- (0.03, 0.03) 535 212 Too close to edge 1 5 ( 4.30, -1.08) +- (0.01, 0.01) 2625 559 Too close to edge 1 7 ( -1.59, -2.37) +- (0.01, 0.01) 3723 876 Too close to edge 1 9 ( -0.89, -2.28) +- (0.02, 0.02) 1487 520 Too close to edge 1 11 ( 1.81, 3.01) +- (0.01, 0.01) 6401 967 Too close to edge 1 2 ( 1.62, 2.09) +- (0.01, 0.01) 13074 1165 Error in setfsigma (sigma too large) 1 4 ( 0.19, 2.17) +- (0.01, 0.01) 6887 1376 Too close to edge 1 6 ( -0.73, 0.59) +- (0.02, 0.02) 1782 526 Too close to edge 1 8 ( 2.57, -0.67) +- (0.01, 0.01) 2304 629 Too close to edge 1 Setting focus to -300.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -300.0, working on guider image /data/spectro/guider/gimg0906.fits 10 ( -1.80, 1.52) +- (0.01, 0.01) 2319 1587 OK 1 1 ( -0.58, 0.84) +- (0.01, 0.01) 3560 2247 Too close to edge 1 3 ( -1.05, -2.13) +- (0.01, 0.01) 1021 798 OK 1 5 ( 3.40, 0.57) +- (0.01, 0.01) 2079 1118 OK 1 7 ( 2.69, -2.95) +- (0.01, 0.01) 2781 1244 Too close to edge 1 9 ( 1.00, -2.16) +- (0.01, 0.01) 1755 1312 OK 1 11 ( -0.33, 0.16) +- (0.01, 0.01) 3498 2103 Too close to edge 1 2 ( -0.54, 0.49) +- (0.00, 0.00) 3725 2728 OK 1 4 ( -1.62, 0.08) +- (0.00, 0.00) 3870 2460 Too close to edge 1 6 ( 1.05, 1.81) +- (0.01, 0.01) 1850 1420 OK 1 8 ( 3.32, 1.15) +- (0.01, 0.01) 1715 814 Too close to edge 1 Setting focus to -250.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -250.0, working on guider image /data/spectro/guider/gimg0907.fits 10 ( -0.78, 1.23) +- (0.01, 0.01) 2445 1830 OK 1 1 ( -0.64, 1.79) +- (0.00, 0.00) 3450 2235 OK 1 3 ( -1.27, -0.94) +- (0.01, 0.01) 1065 965 OK 1 5 ( 3.10, 0.99) +- (0.01, 0.01) 2022 1204 OK 1 7 ( 2.17, -3.24) +- (0.01, 0.01) 2571 1307 Too close to edge 1 9 ( 0.61, -1.75) +- (0.01, 0.01) 1832 1578 OK 1 11 ( 0.28, 1.53) +- (0.01, 0.01) 3412 2086 Too many iterations 1 2 ( 0.05, 0.87) +- (0.00, 0.00) 3724 2908 OK 1 4 ( -0.86, 0.84) +- (0.00, 0.00) 3639 2731 OK 1 6 ( 1.38, 1.51) +- (0.01, 0.01) 1815 1533 OK 1 8 ( 3.80, 0.48) +- (0.01, 0.01) 1634 877 OK 1 Setting focus to -200.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -200.0, working on guider image /data/spectro/guider/gimg0908.fits 10 ( -0.84, 0.91) +- (0.01, 0.01) 2697 1430 OK 1 1 ( -0.24, 2.13) +- (0.01, 0.01) 3855 2012 Too close to edge 1 3 ( -1.40, -0.75) +- (0.01, 0.01) 1024 725 OK 1 5 ( 3.96, 0.48) +- (0.01, 0.01) 2148 883 Too close to edge 1 7 ( 1.65, -2.86) +- (0.01, 0.01) 3095 1250 Too close to edge 1 9 ( 0.51, -1.10) +- (0.01, 0.01) 1797 1287 OK 1 11 ( 0.42, 1.36) +- (0.01, 0.01) 3962 1821 Too close to edge 1 2 ( 0.02, 1.18) +- (0.00, 0.00) 3994 2466 OK 1 4 ( -1.05, 0.72) +- (0.00, 0.00) 3934 2365 Too close to edge 1 6 ( 0.59, 1.86) +- (0.01, 0.01) 1820 1334 OK 1 8 ( 3.10, 0.31) +- (0.01, 0.01) 1664 940 Too close to edge 1 Setting focus to -150.0 Waiting for secondary to arrive Waiting 7500 msec for secondary to arrive (press cntrl-C to abort) Focus Step -150.0, working on guider image /data/spectro/guider/gimg0909.fits 10 ( 0.64, 1.63) +- (0.01, 0.01) 3393 942 Too close to edge 1 1 ( -0.16, 3.13) +- (0.01, 0.01) 5273 1521 Too close to edge 1 3 ( -2.28, 0.84) +- (0.02, 0.02) 1002 413 Too close to edge 1 5 ( 4.54, 0.11) +- (0.01, 0.01) 2897 665 Too close to edge 1 7 ( 0.70, -1.99) +- (0.01, 0.01) 5687 1101 Too close to edge 1 9 ( 0.37, -1.70) +- (0.01, 0.01) 1975 763 Too close to edge 1 11 ( 0.81, 2.69) +- (0.01, 0.01) 6186 1267 Too close to edge 1 2 ( -0.26, 2.30) +- (0.01, 0.01) 5718 1625 Too close to edge 1 4 ( -0.79, 1.78) +- (0.01, 0.01) 5644 1764 Too close to edge 1 6 ( -0.02, 1.70) +- (0.01, 0.01) 2309 784 Too close to edge 1 8 ( 2.40, -0.35) +- (0.01, 0.01) 2106 811 Too close to edge 1